- Catalogs
- OTTO Motors
- OTTO 1200
OTTO 1200
OTTO 1200
OTTO 1200 is a compact, heavy-duty autonomous mobile robot (AMR) designed by OTTO Motors, a part of Rockwell Automation. It is engineered to move payloads up to 1,200 kg efficiently in confined manufacturing environments, offering high throughput and optimized space utilization.
- Max Capacity: 1200 kg (2640 lbs), including payload and attachments.
- Max Turning Speed: 0.8 rad/sec (45°/sec).
- Max Speed: 1.5 m/sec (3.4 mph).
- Max Docking Speed: 0.3 m/sec (0.7 mph).
- Docking Accuracy: ± 10 mm (x,y), ± 10° (yaw).
- Dimensions: 1350x910x320 mm (53.1 x 35.8 x 12.6 in).
- Mass: 370 kg (815 lbs).
- Ground Clearance: 30 mm (1 3/16 in).
- Turning Radius: Turn in place.
- Floor Obstacle Clearance: 4 mm (5/32 in).
- Battery Capacity: 21 Ah, 48 V.
- Max Charge Rate: 42 A.
- Battery Life: 6,000 full charge cycles.
- Charge Time: 30 min (10% to 90%).
- Charging Options: Autonomous Opportunity Charging (default), Manual Charging.
- Adaptive Fieldsets: Intelligent PL-d rated switching fieldsets (patent-pending).
- Manual Control: Pendant-based manual control, guided autonomous control via OTTO software interface.
- Standards Compliance: CE marked, designed in accordance with present standards.
- Power Interface: 24 VDC, 1A regulated, unswitched; 48 VDC nominal, 3x16A unregulated.
- Signal Interface: Ethernet, USB, CAN Bus, GPIO, Safety I/O.
- Safety Interface: Dual-channel E-Stop breakout, 2 safety-rated GPIO.
- Sensors: 2x Forward facing 3D Perception Cameras, 2x LiDAR, 6-axis IMU.
- Communication: WiFi 2.4 / 5 GHz (802.11 a/b/g/n/ac), 2x Long-range Omnidirectional Antennae.
- Computer: Fanless Embedded Computer.
- Charging: Autonomous Supercharger (42 A), Manual Trickle Charger.
- IP Classification: IP20.
- Humidity: 10-95% non-condensing.
- Temperature: 5 to 40° C.
- The inventory management system generates a parts order for recall from the ASRS.
- OTTO, equipped with a conveyor, drives to the ASRS and transfers the material.
- OTTO transports the material to the point of use on the assembly line.
- OTTO delivers the material to the lineside conveyor for use on the production line.
Catalog excerpts
Technical Specifications OTTO 1200 is a compact, heavy-duty autonomous mobile robot (AMR) that is designed to move payloads up to 1,200 kg in the tightest environments. Deliver unmatched throughput with its industry-leading average speed, without compromising on safety. HIGH THROUGHPUT Move heavy payloads at industry-leading average speeds, even in the most confined manufacturing environments. OPTIMIZED SPACE Maximize your floor space by reducing aisle width requirements and sharing chargers between OTTO AMRs. If needed, rapid-access drawers enable quick, single-person maintenance to increase uptime. Includes Payload and Attachment, if any Max. Turning Speed 0.8 rad/sec (45°/sec) Max. Docking Speed 0.3 m/sec (0.7 mph) Turning Radius Suspension Passive, Rocker ENERGY SYSTEM Battery Life 6,000 full charge cycles Battery Charging Autonomous Opportunity Charging (Default) Options Manual Charging OTTO MOTORS BY ROCKWELL AUTOMATION OTTO 1200 SPEC SHEET
Open the catalog to page 1
OTTO 1200 Technical Specifications SAMPLE WORKFLOW 1. The inventory management system generates a parts order for recall from the ASRS 4. OTTO delivers the material to the lineside conveyor for use on the production line 2. OTTO, equipped with a conveyor, drives to the ASRS and transfers the material 3. OTTO transports the material to the point of use on the assembly line SAFETY SYSTEM Adaptive Fieldsets Intelligent PL-d rated switching fieldsets (patent-pending) Standards Compliance Designed in accordance with present standards, CE marked Manual Control Pendant-based manual control. Guided autonomous...
Open the catalog to page 2All OTTO Motors catalogs and technical brochures
OTTO Lifter2 Pages
OTTO 15002 Pages
OTTO 6002 Pages
OTTO 1002 Pages