T75 PreX
12Pages

From now on sawing will be fun.

A decision for generations: T75 PreX from the Premium Class T75 PreX When you want to bequeath a classic to the next generation today. We have built a lot of innovations into this premium machine, so that you have complete freedom. With the T75 PreX, for example, you have the freedom to perform each angle cut on the cross-cut fence and rip fence exactly as required for your tasks and the workpiece being machined. You can do this because for the first time we have combined a cutting height of more than 200 mm with a tilting range of 2 x 46°. RadioCompens angle cutting system T75 PreX with...

Increased time savings and greater convenience when working. The T75 PreX supports you with its modern 5.7" touchscreen control system of the highest performance level. This modern machine operation ensures the machine is simple to use and helps you to calculate workpiece dimensions or angles, for example. Or you can opt for the 10.4" version of the screen. Freely combinable guards Sliding table with replaceable table lip Dual tilting drive

4 | 5 A decision for generations: Cutting height | Rip fence Perfect precision in one cut. The powerful cut up to 204 mm height. A powerful, continuously adjustable speed-controlled 7.5 kW motor option ensures that the remarkable cutting height can also be used effectively. Even at 11 kW motor rating, the saw blade is adjusted to an accuracy of 0.01° - just as you would expect from a MARTIN. The T75 PreX offers a tilting range of 92°, which can be used accurately, reliably and quickly thanks to the new DualDrive system. Saw blade pivoting on both sides The unique MARTIN DualDrive delivers...

Quick, precise, flexible. The rip fence. Rip fence guide | Standard In order to be able to move the fence of the T75 PreX quickly dimensional errors and contributes significantly to perfect and easily, you only need to press a button on the fence and cutting results. The fence is intricately and accurately guided easily move it to the desired position based on the digital by four solid grooved ball bearings. This design ensures display. However, we recommend equipping the T75 with the maximum durability and thus angular accuracy with constantly optionally controlled rip fence, which...

A decision for generations: RadioCompens | Cross-cut fence Cross-cut fence with 2-point system. All T75 PreX machines are fitted with the proven MARTIN 2-point cross-cut fence as standard, which allows workpieces to be aligned at two poits along the fence extrusion. This is the only way to cut precise angles on slightly concave sections due to tensions in the panel. Thanks to the easy-to-read scale (due to built-in magnifier), and standard fine adjustment function for the inner stop element, cutting lengths of 255 – 2,025 mm can be set quickly and extremely precisely. Using the quick clamp...

Angle cutting system RadioCompens. The RadioCompens innovative, patented angle cutting system vastly extends the possibilities of the mitre cross-cut table. The radio-based communication between cross-cut table, controller and stop elements reduces time-consuming setup times for angle cuts by up to 80 %. Your simply set the mitre cross-cut table to the desired angle and the electronic cutting length displayed on the cross-cut fence immediately shows you the correct length. Even the saw blade thickness is automatically taken into account and you always cut perfectly.

A decision for generations: Cross-cut fence | Sliding table The T75 PreX sliding table. The MARTIN hardened steel guide system has been used as the sliding table guide since 1959. The unbeatable technical advantage of this system is the permanent smooth and precision guidance of the table. Some in our industry view the fact that the hardened steel guide strips are permanently lubricated in oil to be a disadvantage. On the contrary, it is a mark of quality as it is the only way to make sure that the surfaces are unaffected by dust and chips. The hardened guide strips are cleaned every time...

T75 PreX cross-cut fence with blow-out block. The cross-cut fence of the T75 PreX was barely affected by doubling the tilting angle of the saw blade to 92°. You receive a high-quality cross-cut fence that can be pushed back to a safe position when you tilt the saw blade to the left. This way it makes room for the blade guard that now protects this space. Thanks to the clever design of the extension mechanism, its blow-out block can be used as backing plate regardless of where the fence is positioned. The T75's cross-cut fence has a perfect contact surface for short workpieces even if it is...

A decision for generations: T75 PreX | Technical data

The machines generate very little dust as per BGI 739-1 Annex 1. All dimensions in millimetres. Manufactured in Germany. Dimensions and specifications subject to technical innovation and may be changed without notice. Illustrations may differ from the original. The binding technical features and equipment are given in the applicable price list.

Eine Entscheidung für Generationen: Formatkreissäge Otto Martin Maschinenbau GmbH & Co. KG Langenberger Str. 6, 87724 Ottobeuren/Germany T +49 (0) 8332 911 - 0 www.martin.info sales@martin.info MARTIN Woodworking Machines Corp. 8715 Sidney Circle, Ste. 100, Charlotte, NC 28269/USA T (704) 921 0360 www.martin-usa.com info@martin-usa.com © Foto Cover: Ildiko Neer | Trevillion Images