Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Otto Männer GmbH
  3. M22 Signature Line
video corpo

M22 Signature Line

M22 Signature Line
1 / 11 PagesView full catalog

M22 Signature Line

Product catalog summary
Overview: This document is a product catalog for Barnes Molding Solutions, focusing on hot runner technology, specifically the M22 Signature Line Valve Gate System. It provides detailed technical specifications, descriptions, and dimensions of the products, along with usage instructions and available options.
Hot Runner Technology: The catalog introduces hot runner nozzles, which connect to the cavity and either gate directly into the part or a sub-runner. It adheres to standards like DIN EN IEC/IEEE 82079-1 Edition 2 for creating usage information and technical drawings.
M22 Nozzle Series: This section describes the M22 Nozzle Series as a standard molding solution, targeting mold designers, toolmakers, molders, and service technicians. It emphasizes the importance of customer drawings for detailed information on tolerances.
Bolt Down Manifold: Illustrations provide a schematic view of the manifold block, noting that dimensions are in millimeters and not to scale.
Available Actuator PS 48.2 Pneumatic: The catalog specifies the technical data for the PS 48.2 pneumatic actuator, including pressure (6 bar/87 psi), maximum open and close forces (1347 N and 1415 N, respectively), and a stroke of 12 mm.
Schematic Views: Various schematic views (A-P, A-SE, A-EP, A-S, A-H) are provided, detailing dimensions and wattage for different configurations. These views are simplified and not to scale.
Cutout Dimensions: The document includes cutout dimensions for different nozzle configurations, emphasizing the need to reference system drawings for complete dimensions before machining.
Nozzle Overview: Reiterates the use of the PS 48.2 actuator for the nozzle, with technical data repeated for clarity.
Contact Information: Provides contact details for Otto Männer GmbH in Germany, including phone, fax, and email.
Copyright and Patents: All content is protected under copyright by Männer, with patents held by Otto Männer GmbH. Distribution is restricted without approval.
Company Information: Barnes Molding Solutions is highlighted as an expert in molds, hot runners, and controls, serving industries like automotive, medical, packaging, and electronics with high-performance technologies and customized solutions.
See more

Catalog excerpts

M22 Signature Line-1

Product Catalog

 Open the catalog to page 1
M22 Signature Line-2

M22 Signature Line Valve Gate System Information Product Catalog - Hot Runner Technology MMSN_000022_EN_Rev06 / 2025-10 © Barnes Molding Solutions 2 Technical specifications subject to change.

 Open the catalog to page 2
M22 Signature Line-3

M22 Signature Line Valve Gate System Information Hot Runner Technology This catalog gives an overview of the latest product, including descriptions, dimensions and technical data. The text next to the graphics gives additional instructions on the use of the product. If available, options are explained with pictures and text. All available accessories for this product are specified. Where necessary, a separate chapter gives the information and important technical data. General Description of the Nozzle Hot runner nozzles are the connection to the cavity. They either gate directly into the part...

 Open the catalog to page 3
M22 Signature Line-4

M22 Signature Line Valve Gate System Information Illustrations simplified, schematically drawn and not to scale. All dimensions in mm. Bolt Down Manifold The following picture shows the standard design, components and dimensions. * Manifold block height depending to H1. MMSN_000022_EN_Rev06 / 2025-10 © Barnes Molding Solutions 4 Technical specifications subject to change.

 Open the catalog to page 4
M22 Signature Line-5

M22 Signature Line Valve Gate System Information Illustrations simplified, schematically drawn and not to scale. All dimensions in mm. Available Actuator PS 48.2 pneumatic The following standard actuator is available. Other actuators can be used on request. Technical Data Pressure: 6 bar (87 psi) Min/Max Close Forces: F open max = 1347 N F close max = 1415 N Stroke: 12 mm MMSN_000022_EN_Rev06 / 2025-10 © Barnes Molding Solutions 5 Technical specifications subject to change.

 Open the catalog to page 5
M22 Signature Line-6

BARNES' MOLDING SOLUTIONS M22 Signature LineValve Gate System Information manner Illustrations simplified, schematically drawn and not to scale. All dimensions in mm.Schematic view A - P, A - SE and A -EP MCN-22-50_A-P22 Valve gate - Straight pin © Barnes Molding Solutions Technical specifications subject to change.

 Open the catalog to page 6
M22 Signature Line-7

BARNES' MOLDING SOLUTIONS M22 Signature LineValve Gate System Information manner Illustrations simplified, schematically drawn and not to scale. All dimensions in mm.Schematic view A - S and A - H Valve gate - Straight pin © Barnes Molding Solutions Technical specifications subject to change.

 Open the catalog to page 7
M22 Signature Line-8

MOLDING SOLUTIONS Valve Gate System Information Illustrations simplified, schematically drawn and not to scale. All dimensions in mm. Dimensions for reference only. Reference system drawing for complete dimensions prior to machining gate detail in mold. The following pictures shows the cutout dimensions for this nozzle. Cutout Dimensions MCN-A-EP Abbr. © Barnes Molding Solutions Technical specifications subject to change.

 Open the catalog to page 8
M22 Signature Line-9

M22 Signature Line Valve Gate System Information Illustrations simplified, schematically drawn and not to scale. All dimensions in mm. Nozzle overview The actuator PS 48.2 is used for this nozzle. Technical Data Pressure: 6 bar (87 psi) Min/Max Close Forces: F open max = 1347 N F close max = 1415 N Stroke: 12 mm MMSN_000022_EN_Rev06 / 2025-10 © Barnes Molding Solutions 9 Technical specifications subject to change.

 Open the catalog to page 9
M22 Signature Line-10

M22 Signature Line Valve Gate System Information Contact Here you will find the main contact from Männer. Europe / Germany Otto Männer GmbH Unter Gereuth 9–11 79353 Bahlingen a.K. Tel. :+49 (0) 7663 609-0 Fax :+49 (0) 7663 609-299 Internet: www.maenner-group.com Email: [email protected] Copyright All text and pictures contained herein are the property of Männer. Copyright © 2025 Männer. Patents Note the copyright protection reminder pursuant to DIN ISO 16016. The specified patents are the property of Otto Männer GmbH. Their distribution and dissemination is permitted only subject to approval....

 Open the catalog to page 10
M22 Signature Line-11

Molds Hot Runners Controls Barnes Molding Solutions is the expert cluster for molds, hot runners, and controls for industrial plastic injection molding. Our brands Foboha, Männer, Synventive, Thermoplay, Priamus and Gammaflux are leaders in their field. We have a comprehensive and in-depth understanding of the automotive, medical, packaging and electronics industries. We support our customers with sophisticated high-performance technologies through to customized turnkey solutions.

 Open the catalog to page 11

All Otto Männer GmbH catalogs and technical brochures

  1. Hot Runner Portfolio
    Hot Runner Portfolio

    20  Pages

  2. M19 Signature Line
    M19 Signature Line

    9  Pages

  3. M16 Signature Line
    M16 Signature Line

    15  Pages

  4. M08 Signature Line
    M08 Signature Line

    15  Pages

Archived catalogs

  1. Hot Runner Technology
    Hot Runner Technology

    2  Pages

  2. Valve Gate Hot Runner Systems
    Valve Gate Hot Runner Systems

    12  Pages

  3. High Precision Molds - System Solutions
    High Precision Molds - System Solutions

    8  Pages

  4. moldMIND II
    moldMIND II

    4  Pages

  5. EDGELINE
    EDGELINE

    2  Pages

  6. MCN-P
    MCN-P

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.