M19 Signature Line

Product catalog summary

Overview
This document is a product catalog for Barnes Molding Solutions, focusing on hot runner technology, specifically the M19 Signature Line Valve Gate System. It includes technical specifications, descriptions, and dimensions of the products.

Hot Runner Technology
The catalog provides a general description of hot runner nozzles, which connect to the cavity and either gate directly into the part or a sub-runner. It adheres to standards such as DIN EN IEC/IEEE 82079-1 Edition 2 for usage information and technical drawings.

M19 Nozzle Series
This section describes the M19 Nozzle Series as a standard molding solution, targeting mold designers, toolmakers, molders, and service technicians. Detailed information on tolerances and customer graphics is available in customer drawings.

Bolt Down Manifold
The document includes a schematic of the bolt-down manifold, noting that illustrations are simplified and not to scale.

Nozzle Tips and Schematic View
Details on nozzle tips for S19 and SE19 are provided, including technical data such as dimensions and wattage. The document lists available nozzle tip styles and their respective gate diameters.

Available Actuator PS 48.2 Pneumatic
The catalog specifies the technical data for the PS 48.2 pneumatic actuator, including pressure, open and close forces, and stroke.

Cutout Dimensions MSN-19-50
Illustrations of cutout dimensions for the nozzle are provided, with a note that dimensions are for reference only and should be verified against system drawings.

Contact Information
Contact details for Otto Männer GmbH in Germany are provided for further inquiries.

Copyright and Patents
The document is protected by copyright and patents, with distribution allowed only with approval. It mentions the protection of products by patents in various countries.

Company Information
Barnes Molding Solutions is highlighted as an expert in molds, hot runners, and controls for industrial plastic injection molding, with a focus on industries such as automotive, medical, packaging, and electronics.

Catalog excerpts

M19 Signature Line Product Catalog

Open the catalog to page 1

M19 Signature Line Valve Gate System Information Product Catalog - Hot Runner Technology MSN_000019_EN_Rev05 / 2025-10 © Barnes Molding Solutions 2 Technical specifications subject to change.

Open the catalog to page 2

M19 Signature Line Valve Gate System Information Hot Runner Technology This catalog gives an overview of the latest product, including descriptions, dimensions and technical data. The text next to the graphics gives additional instructions on the use of the product. If available, options are explained with pictures and text. All available accessories for this product are specified. Where necessary, a separate chapter gives the information and important technical data. General Description of the Nozzle Hot runner nozzles are the connection to the cavity. They either gate directly into the part...

Open the catalog to page 3

M19 Signature Line Valve Gate System Information Illustrations simplified, schematically drawn and not to scale. All dimensions in mm. Bolt Down Manifold The following picture shows the standard design, components and dimensions. * Hot Runner Plate height depending to H1. MSN_000019_EN_Rev05 / 2025-10 © Barnes Molding Solutions 4 Technical specifications subject to change.

Open the catalog to page 4

M19 Signature Line Valve Gate System Information Illustrations simplified, schematically drawn and not to scale. All dimensions in mm. The following Nozzle Tip Styles are available. Valve gate - Straight pin Tip Style with Description S19 Special Execution Gate diameter Example nozzle code: MSN-19-50-S19-154 Nozzle length © Barnes Molding Solutions Technical specifications subject to change.

Open the catalog to page 5

M19 Signature Line Valve Gate System Information Illustrations simplified, schematically drawn and not to scale. All dimensions in mm. Available Actuator PS 48.2 pneumatic The following standard actuator is available. Other actuators can be used on request. Technical Data Pressure: 6 bar (87 psi) Min/Max Close Forces: F open max = 1347 N F close max = 1415 N Stroke: 12 mm MSN_000019_EN_Rev05 / 2025-10 © Barnes Molding Solutions 6 Technical specifications subject to change.

Open the catalog to page 6

M19 Signature Line Valve Gate System Information Illustrations simplified, schematically drawn and not to scale. All dimensions in mm. Dimensions for reference only. Reference system drawing for complete dimensions prior to machining gate detail in mold. The following pictures shows the cutout dimensions for this nozzle. © Barnes Molding Solutions Technical specifications subject to change.

Open the catalog to page 7

M19 Signature Line Valve Gate System Information Contact Here you will find the main contact from Männer. Europe / Germany Otto Männer GmbH Unter Gereuth 9–11 79353 Bahlingen a.K. Tel. :+49 (0) 7663 609-0 Fax :+49 (0) 7663 609-299 Internet: www.maenner-group.com Email: [email protected] Copyright All text and pictures contained herein are the property of Männer. Copyright © 2025 Männer. Patents Note the copyright protection reminder pursuant to DIN ISO 16016. The specified patents are the property of Otto Männer GmbH. Their distribution and dissemination is permitted only subject to approval....

Open the catalog to page 8

Molds Hot Runners Controls Barnes Molding Solutions is the expert cluster for molds, hot runners, and controls for industrial plastic injection molding. Our brands Foboha, Männer, Synventive, Thermoplay, Priamus and Gammaflux are leaders in their field. We have a comprehensive and in-depth understanding of the automotive, medical, packaging and electronics industries. We support our customers with sophisticated high-performance technologies through to customized turnkey solutions.

Open the catalog to page 9

M19 Signature Line

M19 Signature Line

Catalog excerpts

All Otto Männer GmbH catalogs and technical brochures

Archived catalogs