- Catalogs
- Otto Ganter GmbH & Co. KG
- Signal Feedback Included
Signal Feedback Included
Signal Feedback Included
The GN 332 tubular handles are CE marked and comply with the low voltage guideline 2014/35/EU. They include an emergency stop with a 2-channel, normally closed contact, and buttons with LED indicators. The handles support a maximum switching voltage/current of 24 V DC/0.5 A and have an IP67 protection class. Button caps are available in red, green, and blue, with variations for special applications.
The GN 7110 magnetic measuring systems, paired with GN 7110.2 magnetic bands, offer a complete solution for length and angle measurements, suitable for frequent adjustments. Features include a 7-digit LCD display, programmable units, and a lithium battery with over 3 years lifespan. The system is protected against reverse voltage and operates between 0°C and 50°C.
These plungers have sensors for position monitoring, featuring a magnet integrated into the plunger pin. They come with a sensor, sensor clip, Allen wrench, and hexagon nut. The sensor has a normally open output function, operates at 10-30 V DC, and is protected against reverse polarity and short circuits.
Designed for automated processes and aggressive environments, these plungers feature an integrated magnet for electronic position querying and can be accessed via IO-Link. They operate at 4-6 bar pressure and come with a lock nut and sensor accessories.
The GN 860 toggle clamps are pneumatic, available in various types with different clamping arms and coding options. They offer a holding capacity from 700 N to 4000 N and are equipped with magnetic pistons for position monitoring.
This section provides specifications and operational guidelines for pneumatic toggle clamps, including models GN 860, GN 861, GN 862, GN 862.1, GN 962, GN 863, GN 890, and GN 864. Designed for industrial applications, these clamps have specific pressure and operational constraints.
- Maximum operating pressure: 6 bar.
- Permanent magnet integrated into the piston for end position detection with sensors GN 3380.
- Materials: case-hardened steel, zinc-plated components, lubricated moving parts.
- GN 860: Double-action air cylinder and clamping screw GN 708.1.
- GN 861: Heavy-duty, easy disassembly for modifications.
- GN 862: Angled base and forked clamping arms for various mounting configurations.
- GN 862.1: Manual operation capability for individual closure.
- GN 962: "Longlife" model with reinforced body for high-force applications.
- GN 863: Easy unmounting and modification, solid clamping arm.
- GN 890: Push clamping model with sturdy mounting frame.
- GN 864: Power clamps with anti-stick coating for welding spray protection.
- Install a compressed air maintenance unit upstream.
- Regularly lubricate moving parts with special grease.
- Use sensors GN 3380 for machine control and end position detection.
- Clamping screws and holders available, with references to the main catalogue.
- Protective covers and proximity switches recommended for enhanced protection and monitoring.
This section details technical specifications and instructions for hinges with integrated safety switches, designed for monitoring doors and covers in machinery. It includes mechanical and electrical features, safety standards, and ordering instructions.
Hinges handle specific load directions with maximum loads varying by model. They have slow-action contacts with positive opening, ensuring reliable operation, and are tamper-proof with adjustable switching points.
Hinges support various utilization categories, with specific voltage and current ratings. They include short-circuit protection and operate within -25°C to +80°C.
Compliant with EN 60947-5-1 and IEC 60947-5-1, suitable for safety applications up to SIL 3 / PL e. CE, EAC, and UL certified.
Includes ordering codes for different hinge models, specifying dimensions, types, and configurations, with information on accessories and customization options.
Hinges must be installed and maintained by qualified personnel, following operating instructions and standards. Compliance with regulations is emphasized.
References to additional resources and operating instructions available online for comprehensive guidance.
Outlines specifications for components including mechanical life span, actuating speed, and electrical features. Mechanical life span: 106 operating cycles; actuating speed: 2°/second to 90°/second. Electrical features detailed according to standards like IEC 60947-5-1 and UL.
Provides assembly instructions for components like oil level indicators and cable connections.
Compliant with CE, IMQ, UL, and EN standards. Safety applications compliant up to SIL 3 / PL e according to EN ISO 13849-1.
Hinges with safety switches should be mounted by qualified personnel in compliance with instructions and standards. Use of mounting plates is advised.
Includes tables detailing specifications for components like cables and oil level indicators. Key data includes operating voltage, current load rating, and maximum contact voltage.
Mission time: 20 years according to EN ISO 13849-1; cycles (B10d): 2,000,000 according to EN 61820-2; ambient temperature range: -20°C to +80°C. Avoid magnetic fields near certain components to prevent interference.
Describes a float switch for monitoring fluid levels, activating an electrical switch when levels exceed or fall below a set mark. The switching point is adjustable by modifying the float rod length.
- Material: Plastic (Polyamide PA), temperature resistant up to 80°C.
- Seal: O-ring NBR, Flat sealing TPE.
- Socket cap screws: Steel, zinc plated.
- Electrical specifications: Max. switching voltage/current: 230 V AC/DC, 2 A; Max. switching capacity: 10 W.
- Connector plug: DIN EN 175301-803 Type C.
- Protection class: IP 65.
- Cable gland: PG 7, for cable diameter 6 to 7 mm; Cable cross-section: 2 x 1.5 mm².
- To change contact type (NO or NC), adjust the magnet position.
- For cable connection: Follow steps to connect wires to the contact holder.
Catalog excerpts
Signal Feedback Included Standard Parts. Ganter.
Open the catalog to page 1
Signal Feedback Included Cabinet U-Handles GN 422 Cabinet U-Handles with Electrical Switching Function Zinc Die Casting Page 6 GN 3310 Switches with Illuminated Push Button Page 8 GN 331 Tubular Handles with Electrical Switching Function Aluminum Page 12 GN 332 Tubular Handles with Electrical Switching Function Aluminum Page 14 GN 7110 Magnetic Measuring Systems for Length and Angle Measurements Page 16 GN 7110.2 Magnetic Bands for Magnetic Measuring Systems GN 7110 Stainless Steel / Plastic Page19 GN 817.6 Indexing Plungers with Sensor for Position Monitoring Stainless Steel Page 20 GN 817.7...
Open the catalog to page 2
Signal Feedback Included Toggle Clamps, Pneumatic continued GN 862.1 Toggle Clamps Pneumatic, with Additional Manual Operation, Steel Page 32 GN 962 Toggle Clamps Pneumatic, Heavy Duty „Longlife“ Steel Page 34 GN 863 Toggle Clamps Pneumatic, Heavy Duty Steel Page 36 GN 865 Power Clamps Pneumatic Steel Page 42 GN 866 Power Clamps Pneumatic Steel Page 44 GN 893.2 Proximity Switch for Power Clamps, Size 32 Page 49 GN 893.3 / GN 893.4 Proximity Switches for Power Clamps, Size 40 / Size 50 Page 49 GN 890 Toggle Clamps Pneumatic, for Push Clamping Steel Page 38 Power Clamps, Pneumatic GN 864 Power...
Open the catalog to page 3
Signal Feedback Included Accessory for Pneumatically Operated Clamps / Cylinders GN 3380 Sensor for Pneumatically Operated Clamps / Cylinders Page 50 Spring Plungers GN 615.7 Spring Plungers with Limit Switch Steel Page 52 Positioning Elements GN 251.2 Setting Bolts with Limit Switch Steel Page 53 GN 139.1 Hinges with Safety Switch Zinc Die Casting Page 54 GN 139.2 Hinges without Switch Zinc Die Casting Page 54 GN 139.3 Mounting Plate Flat, for Hinges GN 139.1 / GN 139.2 Steel Page 56 GN 139.4 Mounting Plate Angled, for Hinges GN 139.1 / GN 139.2 Zinc Die Casting Page 56 GN 139.5 Hinge with Safety...
Open the catalog to page 4
Signal Feedback Included Hinges continued GN 239.4 Hinges with Switch Plastic Page 60 GN 239.7 Hinge without Switch Plastic Page 62 GN 239.3 Hinge without Switch Plastic Page 60 GN 239.6 Hinges with Safety Switch Plastic Page 62 GN 239.8 Mounting Plates for Hinges GN 239.6 / GN 239.7 Plastic Page 64 GN 330 Cables with Connector Coupling Page 66 GN 656.1 Oil Level Indicators with Electrical Oil Level Monitoring, Lateral Plug Page 70 GN 654.2 Assembly Sets for Electrical Oil Level Monitoring Plastic Page 72 Oil Level Indicators GN 656 Oil Level Indicators with Electrical Oil Level Monitoring, Axial...
Open the catalog to page 5
Cabinet U-Handles Zinc Die Casting, with Electrical Switching Function iF product design award T1 With 1 button T2 With 2 buttons 3 Connection type K Cable S Plug (with 0,25 m cable) Zinc die casting ZD Powder coated Black, RAL 9005, textured finish Silver, RAL 9006, textured finish Button Stainless steel AISI 304 Cable (Outer sheath) Polyurethan PUR Black Light guide Plastic Crystal-clear Polycarbonate (PC) → Main Catalogue Page 2153 Plastic Characteristics → Main Catalogue Page 2158 Stainless Steel Characteristics → Main Catalogue Page 2166 When the button is pressed, an electrical control...
Open the catalog to page 6
GN 422 Cabinet U-Handles continued Electrical and mechanical properties Button Contacts Contact material Switching voltages Switching current mechanical lifespan electrical lifespan Changeover contact, snap contact Silver alloy max. 125 V (plug) max. 240 V (cable) max. 3 A 106 switching cycles 50,000 switching cycles (under full load) LED ring lighting Operating voltage / Operating current bi-color (red / green) Protection class Connection type Cable (K) or Plug connector (S) PUR cable with open stranded wires (2 m or 5 m) 5-pin connector M12x1 with PUR cable 0.25 m IP 67 Approvals, conformities...
Open the catalog to page 7
Switches Stainless Steel, with Illuminated Push Button Identification no. Button rounded Connection type Cable length l in meter Connection type K 2 Button Stainless steel AISI 304 Switches GN 3310 with an illuminated push button come with a changeover switch and integrated LED ring light. Cable (Outer sheath) Polyurethan PUR Black Hexagon nut Stainless steel AISI 304 When the button is pressed, an electrical control impulse to switch off a machine, for example, can be triggered based on the wiring of the contacts (NC or NO). Light guide Plastic Crystal-clear Polycarbonate (PC) → Main Catalogue...
Open the catalog to page 8
Electrical and mechanical properties Button Contacts Contact material Switching voltages Switching current mech. lifespan elect. lifespan Changeover contact, snap contact Silver alloy max. 125 V (plug) max. 240 V (cable) max. 3 A 106 switching cycles 50,000 switching cycles (under full load) LED ring lighting Operating voltage / Operating current bi-color (red / green) Connection type Cable (K) or Plug (S) PUR cable with open stranded wires (2 m or 5 m) 5-pin connector M12x1 with PUR cable 0.25 m Protection class Tightening torque Mounting cut-out Approvals, conformities CE declaration 1.2 Operating...
Open the catalog to page 9
Cabinet U-Handles Plastic, with Electrical Switching Function Original design EBR-SW Cable length in m Type KU / KR / KL Plastic Technopolymer (Polyamide PA) - Glass fiber reinforced - Temperature resistant up to 80 °C - Black-gray, matte finish Similar RAL 7021 Cabinet U-handles GN 628.4 are equipped with a button which operates a make / break contact, for instance to send an electric pulse to switch off a machine. The cabinet U-handle also houses a red LED which sends an electric signal to the operator to visually indicate a change in machine status. The cabinet U-handle is therefore a functional...
Open the catalog to page 10
GN 628.4 Cabinet U-Handles continued Electrical and mechanical characteristics Button Contacts 1x normally open / 1x normally closed Switching voltage Switching current mech. life expectancy left - green right - red Connection type Cable (Type KL / KR / KU) PUR-cable with 2,5 m or 5 m length Protection class IP65 1.2 Operating by Using Machine and Device Handles |
Open the catalog to page 11
Tubular Handles Aluminum, with Electrical Switching Function T0 Without button T1 With 1 button T2 With 2 buttons 4 Identification no. Without emergency stop With emergency stop Handle tube Ø 30 x 1,5 Aluminum - Powder coated Black, RAL 9005, textured finish - Anodized, natural color Handle legs Zinc die casting Powder coated Black, RAL 9005, textured finish Cover (for identification no. 1 instead of emergency stop) Plastic, light gray Information Tubular handles GN 331 are available with various options for emergency stops and buttons. They can be used for activating individual functions of...
Open the catalog to page 12All Otto Ganter GmbH & Co. KG catalogs and technical brochures
Ganter Catalogue 18.02210 Pages
Indexing Plungers GN 8234 Pages
Hygienic Design52 Pages
Couplings36 Pages
Wheels and Casters52 Pages
Conveyor Components44 Pages
Aluminium Profiles72 Pages
Telescopic Slides58 Pages
Gears and Racks Made of Polyamid20 Pages
Quick Release Couplings8 Pages
Multiple-joint hinges48 Pages
