Indexing Plungers, Pneumatically Operated

Product catalog summary

Overview: The document provides detailed specifications and operational guidelines for pneumatically operated stainless steel indexing plungers, specifically the GN 817.7 model. These components are designed for integration into automated systems where manual operation is not feasible, and they are suitable for aggressive environments due to their stainless steel construction.

Specifications:

Types: D (double-acting), A (single-acting, retract by spring), E (single-acting, protrude by spring).
Materials: Stainless steel AISI 303 for the plunger pin, with surface hardening; Neodymium magnet for position sensing.
Seals: Polyurethane (PUR) for rod seal, Acrylonitrile butadiene rubber (NBR) for piston seal and O-ring.
Operating Pressure: 4 - 6 bar with filtered, dried air.
Temperature Range: -20 °C to +80 °C.

Sensor and Electrical Properties:

Output: 2x normally open (NO), 2x PNP type.
Supply Voltage: 12 - 30 V DC, with a continuous current of ≤ 100 mA.
Protection: IP 67, with reverse polarity and short-circuit protection.
Communication: IO-Link (V1.0) with a cycle time of 2.3 ms.

Installation and Operation:

The sensor cable's radial position is adjustable during installation.
Installation involves inserting the sensor into the clip, tightening the screw, and adjusting the position.
End positions are taught via the operating element or IO-Link.

Additional Features:

Integrated magnet allows electronic position querying.
Sensor electronics accessible via IO-Link for setting and reading switching points.
Supplied with a lock nut, and optionally with sensor, sensor clip, and allen wrench.

Applications: Suitable for automated processes in environments where manual operation is impractical, and where resistance to aggressive conditions is required.

Catalog excerpts

Indexing Plungers, Pneumatically Operated-1

Indexing Plungers Pneumatically Operated Standard Parts. Ganter.

Open the catalog to page 1

Indexing Plungers, Pneumatically Operated-2

Stainless Steel Indexing Plungers Pneumatically Operated D Pneumatically double-acting, protrude / retract A Pneumatically single-acting, retract by spring force E Pneumatically single-acting, protrude by spring force 4 OP Without position query BS0,4 Position query on both sides, with plug, cable 0.4 m Type A Spring force F in N ≈ Type E Spring force F in N ≈ When protruding When retracting | Highlights - Indexing Plungers, Pneum

Open the catalog to page 2

Indexing Plungers, Pneumatically Operated-3

GN 817.7 Stainless Steel Indexing Plungers continued Stainless steel indexing plungers GN 817.7 with pneumatic operation can be easily and securely integrated into automated processes and can be positioned at locations where hand operation of the indexing plunger is not possible. Thanks to the material used, the indexing plungers are also suitable for more aggressive environments. steel AISI 303 Plunger pin surface hardened seal and O-ring Acrylonitrile butadiene rubber (NBR) Neodymium, iron, boron (NdFeB) • Sensor -- Housing Polyamide (PA), black -- Cable and plug Outer sheath polyurethane (PUR),...

Open the catalog to page 3

Indexing Plungers, Pneumatically Operated-4

Pneumatic Properties Operating pressure Operating medium Filtered, dried air, unoiled or oiled Temperature range Electrical Properties of the Sensor Output function Output type Supply voltage Connection type Plug (S) 4-pole connector M8x1, freely rotating with knurled screw connection Protection type Power consumption Voltage drop Protection class Temperature range Shock and vibration resistance Reverse polarity protection Short-circuit protection Activation impulse suppression Communication interface IO-Link (V1.0) Cycle time 2.3 ms Process data length 2 bits Process data structure: Bit 0 =...

Open the catalog to page 4

Indexing Plungers, Pneumatically Operated

Indexing Plungers, Pneumatically Operated

Catalog excerpts

All Otto Ganter GmbH & Co. KG catalogs and technical brochures