Hygienic Design
32Pages

Hygienic Design Standard Parts Especially for the Use in Hygienically Sensitive Areas Standard Parts. Ganter.

Product Family Hygienic Design GN 75.6 Waist Shaped Stainless Steel Knobs with Internal Thread Hygienic Design Page 8 GN 75.6 Waist Shaped Stainless Steel Knobs with Threaded Stud Hygienic Design Page 8 Cabinet U-Handles GN 429 Stainless Steel Cabinet U-Handles Hygienic Design Page 9 Adjustable Hand Levers GN 305 Adjustable Stainless Steel Hand Levers with Bushing Hygienic Design Page 10 GN 305 Adjustable Stainless Steel Hand Levers with Threaded Stud Hygienic Design Page 11 GN 5435 Stainless Steel Star Knobs Hygienic Design Page 12 GN 5445 Stainless Steel Three-Lobe Knobs Hygienic Design...

Product Family Hygienic Design Screws Nuts GN 1580 Stainless Steel Nuts Hygienic Design Page 16 GN 1580 Stainless Steel Screws Hygienic Design Page 17 GN 1581 Stainless Steel Screws Low-Profile Head Hygienic Design Page 18 GN 1582 Stainless Steel Screws with Recessed Stud for Loss Protection Hygienic Design Page 19 GN 1150 Stainless Steel Latches Operating Side in Hygienic Design Page 20 GN 1150 Stainless Steel Latches Operating and Latch Arm Side in Hygienic Design Page 22 Leveling Feet Cover Sleeves GN 20 Stainless Steel Leveling Feet without Mounting Holes Hygienic Design Page 24 GN 20...

Standard Parts in Hygienic Design Hygienic Design Maximum hygiene is a fundamental requirement, not only where food is produced. Hygiene also plays an increasing role in other industrial areas, from the pharmaceutical industry to the manufacture of paints and dyes. Nowadays a major issue is the manufacture of products without added preservatives or with as few added preservatives as possible—while still achieving a long shelf life. However, this can only be achieved in a production environment in which all risks of contamination with microorganisms or dirt are excluded. For plant...

Principles Requirements, Design Principles Design Requirements for Hygienic Design Material - Non-rusting stainless steels - FDA and EU compliant plastics and elastomers Surfaces - Surfaces must be able to be cleaned - Steps due to appliance configurations which are not aligned must be avoided - Seals must be designed so that no gaps occur - O-ring grooves must be hygienically designed - Contact with the product to be manufactured must be ruled out - Corners should preferably have a radius of 6 mm or more Design / Geometry The interior and exterior areas of all appliances, components or...

Principles Seals, Design Seals For the standard parts which are listed in Hygienic Design, seals have the central function of protecting dead spaces, gaps and cracks from the penetration of cleaning fluids or product residues. For this, a defined pre-tension or pressing of the seals and wipers is necessary for a reliable and permanent seal in the installed condition. Within the Hygienic Design product family, seal installation spaces and seal cross sections are calculated and designed with simulation software, so that the necessary surface compression is achieved on installation and the...

Principles Mounting Example, Certification Leveling Foot Hygienic Design GN 20 with Mounting Holes → Page 26 Highlights - Standard Parts in Hygienic Design |

Waist Shaped Stainless Steel Knobs Hygienic Design D With internal thread E With threaded stud Specification steel AISI 316 L -- Matte finish (Ra < 0,8 µm) -- Polished finish (Ra < 0,8 µm) ring -- H-NBR H Temperature resistant -25 °C to +150 °C -- EPDM E Temperature resistant -40 °C to +120 °C -- Blue -- Hardness 85 ±5 Shore A -- FDA compliant • Elastomer • Stainless Information Waist shaped stainless steel knobs GN 75.6 are intended for use in hygiene areas. The sealed mounting surface enables mounting without dead spaces; the impervious geometry in combination with the high quality finish...

Stainless Steel Cabinet U-Handles Hygienic Design steel -- AISI 316 L A4 -- Matte finish (Ra < 0.8 µm) MT -- Polished finish (Ra < 0.8 µm) PL Stainless steel cabinet U-handles GN 429 are intended for use in hygiene areas. The sealed mounting surfaces enable fastening without dead spaces. The high quality finish prevents adherence of dirt and facilitates cleaning. Due to the manufacturing process, special designs can be supplied even in relatively small quantities. ring -- H-NBR H Temperature resistant -25 °C to +150 °C -- EPDM E Temperature resistant -40 °C to +120 °C -- Blue -- Hardness...

Adjustable Stainless Steel Hand Levers Hygienic Design Stainless steel precision casting -- AISI CF-8 -- Polished finish (Ra < 0,8 µm) PL • Threaded bushing Stainless steel AISI 304 ring / Wiper H-NBR H -- Blue -- Temperature resistant -25 °C to +150 °C -- Hardness 85±5 Shore A -- FDA compliant • Elastomer • Stainless • RoHS Steel Characteristics → Page 2166 Information Adjustable hand levers GN 305 with solid stainless steel handle are intended for use in hygiene areas. The sealed mounting surface enables fastening without dead spaces. The high quality finish as well as the impervious...

Adjustable Stainless Steel Hand Levers Hygienic Design Stainless steel precision casting -- AISI CF-8 -- Polished finish (Ra < 0,8 µm) PL • Threaded stud Stainless steel AISI 304 ring / Wiper H-NBR H -- Blue -- Temperature resistant -25 °C to +150 °C -- Hardness 85±5 Shore A -- FDA compliant • Elastomer • Stainless • RoHS Steel Characteristics → Page 2166 Information Adjustable hand levers GN 305 with solid stainless steel handle are intended for use in hygiene areas. The sealed mounting surface enables fastening without dead spaces. The high quality finish as well as the impervious...

Stainless Steel Star Knobs Hygienic Design Specification steel -- AISI 316 L -- Matte finish (Ra < 0,8 µm) -- Polished finish (Ra < 0,8 µm) ring -- H-NBR H Temperature resistant -25 °C to +150 °C -- EPDM E Temperature resistant -40 °C to +120 °C -- Blue -- Hardness 85±5 Shore A -- FDA compliant • Elastomer • Stainless Information Stainless steel star knobs GN 5435 are intended for use in hygiene areas. The sealed mounting surface enables fastening without dead spaces. The high quality finish and the large corner radii prevent adherence of dirt and facilitate cleaning. see also... • Sealing...