SFH 4726AS
19Pages

Published by ams-OSRAM AG Tobelbader Strasse 30, 8141 Premstaetten, Austria Phone +43 3136 500-0 ams-osram.com © All rights reserved | 2023-01-13 1 | Version 1

OSLON® Black SFH 4726AS OSLON Black Series (940 nm) - 150° Applications - Access Control & Security - Factory Automation - Home & Building Automation - Body Tracking - Medical Lighting Features - Package: clear silicone - Corrosion Robustness Class: 3B - ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) - IR lightsource with high efficiency - Double stack emitter - Low thermal resistance (Max. 9 K/W) - Centroid wavelength 940 nm - Optimized for high brightness DC operation

Ordering Information  Type

Maximum Ratings TA = 25 °C Parameter Operating temperature Storage temperature Junction temperature Forward current Forward current pulsed tp ≤ 800 µs; D ≤ 0.005 Power consumption ESD withstand voltage acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) For the forward current and power consumption please see “maximum permissible forward current” diagram

Peak wavelength Centroid wavelength Spectral bandwidth at 50% Irel,max (FWHM) Half angle Dimensions of active chip area Temperature coefficient of voltage Temperature coefficient of brightness Temperature coefficient of wavelength Thermal resistance junction solder point real 6) RthJS real

Brightness Groups  Group Only one group in one packing unit (variation lower 1.6:1). The brightness values are measured during a current pulse of typically 10ms, with a tolerance of +/- 12%.

Relative Spectral Emission Radiation Characteristics

Forward current Relative Total Radiant Flux Max. Permissible Forward Current Permissible Pulse Handling Capability IF = f (tp); duty cycle D = parameter; TS = 85°C

Dimensional Drawing Further Information: Approximate Weight: Package marking: Corrosion test: Class: 3B Test condition: 40°C / 90 % RH / 15 ppm H2S / 14 days (stricter than IEC 60068-2-43) The device is protected by ESD device which is connected in parallel to the Chip.

For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Package not suitable for ultra sonic cleaning.

Reflow Soldering Profile Product complies to MSL Level 2 acc. to JEDEC J-STD-020E OHA04525 Pb-Free (SnAgCu) Assembly Minimum Recommendation Maximum 2 Time tS TSmin to TSmax Ramp-up rate to peak*) TSmax to TP Liquidus temperature Ramp-up rate to preheat*) 25 °C to 150 °C Time above liquidus temperature Peak temperature Time within 5 °C of the specified peak temperature TP - 5 K All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range

Dry Packing Process and Materials Moisture-sensitive label or print L hu 0% e e /6 tiv ˚C la ared ag ck re fr 30 _ < in pa % k of to 90 rs ea s d ). rs ou or te (p on rs H de , ou iti H an bjec ng ou rs co ˚C 72 si nd H ou 5 te 48 ˚C su es e H co ± 24 6 da e y 40 be oc tim ˚C e or < ith tim ill pr or ct ). w O w nt 23 tim e at lo or fa M TO F s al tim at le ˚C at lo at or e. P th F l tic th va lo or ur O F lo s ui on be if: read en w ed l 4 5 F m la ce eq id lo g, n oc l ve vi 5a is in or be 24 de pr ve l 6 Le de , nt whe e te co g: , w e Le ve l ke r ou se da ba ed flo ur e Le ve m % ba e...

Notes The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this data sheet falls into exempt risk group - Exempt. Subcomponents of this device contain, in addition to other substances, metal filled materials including silver. Metal filled materials can be affected by environments that contain traces of aggressive substances. Therefore, we recommend that customers minimize device exposure to aggressive substances during storage,...

Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version on our website. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it...

Radiant intensity: Measured at a solid angle of Ω = 0.01 sr Brightness: The brightness values are measured with a tolerance of ±11%. Reverse Operation: This product is intended to be operated applying a forward current within the specified range. Applying any continuous reverse bias or forward bias below the voltage range of light emission shall be avoided because it may cause migration which can change the electro-optical characteristics or damage the LED. Forward Voltage: The forward voltages are measured with a tolerance of ±0.1 V. Total radiant flux: Measured with integrating sphere....

Revision History Version Description Ordering Information Maximum Ratings Characteristics Electro - Optical Characteristics (Diagrams) Schematic Transportation Box Dimensions of Transportation Box

Published by ams-OSRAM AG Tobelbader Strasse 30, 8141 Premstaetten, Austria Phone +43 3136 500-0 ams-osram.com © All rights reserved