Catalogs >
OSG >
PSTW Phoenix

PSTW Phoenix
8Pages

Catalog excerpts

6-corner shoulder cutter series PHOENIX PSTW

Key features: Phoenix PSTW Positive rake angle geometry 6,55mm Economical 3 cutting edges per side (total of 6) Flat cutting edge for excellent surface finish Maximum 12mm depth of cut Chip pocket uniquely designed for heavy machining to enable maximum efficiency

Open the catalog to page 2

Face Milling Side Milling Side Milling]

Open the catalog to page 3

The above cutting conditions are to be used as general guidelines. Adjustments may be necessary depending on actual cutting condition.

Open the catalog to page 4

Bottom Roughness Excellent surface roughness Tool High efficiency even in long overhang length applications Tool Applicable cutting Range (m/min) Cutting Speed Insert variation based on application 5

Open the catalog to page 5

press mold slide surface High-precision machining of Tool The PSTW was able to achieve excellent surface precision during side finishing, satisfying the required run-out accuracy of under 10pm. High efficiency machining of SUS304 (Stainless steel) Tool With the increase of depth of cut (a p), the competitor tool exhibited chattering and burrs, which hindered further efficiency improvement. Whereas the PSTW, even with one less corner, was able to increase machining efficiency by 67%, allowing high productivity. Applicable cutting Range In this test, the PSTW achieved higher efficiency versus...

Open the catalog to page 6

The PSTW demonstrated much greater wear resistance versus the competitor tool. In particular, it was able to effectively suppress wear progress of the cutting edge and achieved 3.5 times the durability versus the competitor. Long tool life in Ti-6Al-4V Tool The PSTW (XC5040) was able to suppress wear resistance to prolong durability whereas the competitor equivalent product (double sided triangle insert) exhibited early wear and chipping. Competitor A (After machining 2m) 7

Open the catalog to page 7

01/2017 - All rights reserved. © OSG Europe 2016. The contents of this catalogue are provided to you for viewing only. They are not intended for reproduction either in part or in whole in this or other medium. They cannot be copied, used to create derivation work or used for any reason, by means without the express, written permission of the copyright owner. If prices are stated, they are netto unit-prices and any eventual tax(es) have to be added. The company is not responsable for any printing error in technical, price and/or any other data. Tool specifications subject to change without...

Open the catalog to page 8

PSTW Phoenix 8Pages

Catalog excerpts

All OSG catalogs and technical brochures

PSTW Phoenix
8Pages