Catalogs >
OSG >
DCT Diameter Correction Tool

DCT Diameter Correction Tool
8Pages

Catalog excerpts

Diameter Correction Tool for thread mills

1 Reduce setup & machining time RPRG values are indicated on tool shank manufactured from November 2014. N ow possible to reduce the checking and correction simply by entering the RPRG value. Measurable range 100% ~ 50% tolerance of thread size (6H) 3 7 positions on the reading scale With an attached reading scale, the effective diameter's position can be confirmed at a glance.

Open the catalog to page 2

Key features & benefits DCT 1 Reduce setup & machining time The internal thread effective diameter, which used to be difficult to determine, can now be measured with readable values. Thread plug 2 Scale sleeve The DCT is made up of three components – the thread plug, scale sleeve and bolt for fixing the position. Measurable range from 100% ~ -50% tolerance of thread size (6H); with 7 positions on the reading scale. Effective diameter & position relationship diagram Example: M10×1 2 Insert the DCT into Insert the DCT into the thread. Turn the the thread. Turn the tool until itit has tool...

Open the catalog to page 3

for 6H with scale Sleeve Dia. Measurable depth (mm) in blind hole − 1) Customization is required for chamfer exceeding thread size + 1 mm and counterboring applications with a diameter less than the scale sleeve. 2) Accommodates 5H, 2 and 1 classes of fit. Measurable depth (mm) in blind hole 1.5 D 1) Customization is required for chamfer exceeding thread size + 1 mm and counterboring applications with a diameter less than the scale sleeve. Contact your nearest OSG sales representative for more information. Specials (alternat

Open the catalog to page 4

OSG Thread mill lineup Size Range Product series Thread mill for small size • The 3-crest thread lenght reduces cutting forces and applies a low load to the tool and equipment. • A short overall lenght of 40mm for superb ease of use. • The WXS Coating, with a proven track record on end mills for high hardened materials, and an exclusive carbide base material. • Available from M1, 0.25 pitch small-diameter threads • Suitable for carbon steels, stainless steels, castings and non-ferrous metals • Cuts hardened steels exceeding 50HRC and heat-resistant alloys (M2 and larger) • Suitable for...

Open the catalog to page 5

Support tools for your thread milling needs RPRG RPRG is the reference value of tool radius offset Conventionally, the tool radius was entered during setup as a parameter of the NC system, which was corrected by checking the thread with a gauge. However, it has become possible to reduce the checking and correction simply by entering the RPRG value indicated on the tool shank. Example • Tool diameter:Ø7.5; Pitch: 1; Minimum cutting bore diameter: 10 (EDP No.:8304721) • Internal thread size: M10 × 1 • Tolerance for pitch diameter: 0 to +0.118 (ISO-5H), 0 to +0.150 (ISO-6H) Entered value of...

Open the catalog to page 6

Tools for the gauging of threads for Internal thread GO side Limit gauges for screw threads for External thread NO GO side Limit gauges for parallel pipe threads for External thread GO side Limit gauges for screw threads are graded in the same manner as screws. Screw threads are inspected according to two limits defined by GO and NO GO gauges. The Previous JIS gauge system provides two categories of NO GO gauges depending on the purpose of usage: machining and inspection. This classification is not used in the ISO system. Screw threads pass the inspection if the GO gauge, when screwed by...

Open the catalog to page 7

OSG EUROPE LOGISTICS Avenue Lavoisier 1 B-1300 Z.I. Wavre - Nord Belgium Tel.: +32 10 23 05 07 Fax: +32 10 23 05 11 info@osgeurope.com SLOVAKIA Branch office of OSG Europe Logistics s.a. Tel (SK) +421 2 4329 1295 Tel (BE) +32 10 23 05 07 Fax (BE) +32 10 23 05 51 sales-osgsvk@osgeurope.com OSG POLAND Sp. z.o.o. ul. Spółdzielcza 57 05-074 Halinów Poland Tel: +22 760 82 71 Fax: +22 760 82 71 osg@osg-poland.com OSG FRANCE Parc Icade, Paris Nord 2 Immeuble “Le Rimbaud” 22 Avenue des Nations CS66191 - 93420 Villepinte France Tel.: +33 1 49 90 10 10 Fax: +33 1 49 90 10 15 sales@osg-france.com OSG...

Open the catalog to page 8