Synchronization Distribution Unit OSA 5533C SDU Oscilloquartz S.A. / Rue des Brévards 16 / CH-2002 Neuchâtel Switzerland / Tel.+41(0)32 722 55 55 / Fax+41(0)32 722 55 56 [email protected] / www.oscilloquartz.com HIGHLIGHTS „«ƒnSynchronization Distribution Unit with holdover capability „«ƒnSingle or dual input „«ƒnUp to 64 outputs „«ƒnUp to 24 E1 or T1 traffic carrying signals „«ƒnHoldover: compliant to ITU-T G.812 SSU (Type III) requirements „«ƒnFull support of SSM on E1/T1 „«ƒnWide choice of output interfaces: 2.048Mbit/s (E1), 1.544 Mbit/s (T1), 64/8 kbits/s Composite Clock (CC), 2.048/5/10 MHz. „«ƒnOutput protection: (1:1) and unprotection modes „«ƒnWide choice of connectors and impedances „«ƒnFully locally and remotely manageable „«ƒnFully maintenance-free operation OVERVIEW The steady expansion and growth of telecommunication services has resulted in the implementation of complex networks. These often contain a large number of network elements requiring proper synchronization to ensure a smooth network operation with the required quality of service. Further growth results in additional output capacity being required at the network nodes to synchronize the supplementary elements and thus makes it necessary to implement expansion synchronization equipment. To meet this requirement, Oscilloquartz proposes its compact Synchronization Distribution Unit: OSA 5533C SDU.

Oscilloquartz S.A. / Rue des Brévards 16 / CH-2002 Neuchâtel Switzerland / Tel.+41(0)32 722 55 55 / Fax+41(0)32 722 55 56 [email protected] / www.oscilloquartz.com Synchronization Di stribution Unit OSA 5533C SDU OVERVIEW The OSA 5533C SDU provides a very economical and reliable solution to the distribution of synchronization references to network elements, such as switches, cross-connects and multiplexers. The OSA 5533C SDU provides up to 48 or 64 outputs referenced to the selected input or to the Holdover Unit. 1:1 card protection is available as an option for all output cards. With the...

www.oscilloquartz.com Synchronization Di stribution Unit OSA 5533C SDU MANAGEMENT The OSA 5533C SDU is manageable in three different ways: „«ƒnLocally, through the RS-232 port using the OSA Local Manager for 5533C, a graphical, intuitive windows-based application „«ƒnRemotely, through the RS-232 port and a modem/LAN connection, using the same Local Manager coupled with the OSA Remote Access Manager (RAM) software. „«ƒnRemotely, through TCP/IP connection to the network management center, using Oscilloquartz’ renowned synchronization management system- SyncViewTM Plus Functional Diagram

Synchronization Distribution Unit OSA 5533C SDU Oscilloquartz S.A. / Rue des Brévards 16 / CH-2002 Neuchâtel Switzerland / Tel.+41(0)32 722 55 55 / Fax+41(0)32 722 55 56 [email protected] / www.oscilloquartz.com TECHNICAL SPECIFICATION Power: Up to 2 power supplies in any combination of: „«ƒn39-72 VDC „«ƒn150-265 VAC „«ƒn65-132 VAC Input Signals: Up to 2 synchronization inputs chosen among1: „«ƒn2.048 MHz „«ƒn2.048 Mbit/s (E1) „«ƒn1.544 Mbit/s (T1) „«ƒn64 kHz „«ƒn1 MHz „«ƒn1.544 MHz „«ƒn5 MHz „«ƒn10MHz Output Signals: Up to 48 unprotected / 32 protected output selectable in groups of 16 among:...