*mydirectindustry

Catalogs
Oscilloquartz SA
OSA 5030 PPS Distribution Unit

OSA 5030 PPS Distribution Unit

Product catalog summary

Overview: The OSA 5030 PPS Distribution Unit by Oscilloquartz SA is a compact and cost-efficient solution designed for OEMs and integrators requiring high-quality synchronization distribution. It is particularly suited for applications where a square wave signal is necessary.

Key Features:

Reliable and low-cost with a compact design.
Supports input frequencies from 1PPS to 50 MHz.
Provides 12 outputs with BNC connectors for both inputs and outputs.
Operates on an AC power supply ranging from 90-264 VAC.
Multiple units can be cascaded to increase output capacity.

Applications: The unit is ideal for time and frequency distribution, digital broadcasting, and any system requiring square wave distribution.

Power Supply:

AC power supply: 90 to 264 VAC (47 – 63 Hz).
Power consumption: 10 W.

Configuration and Monitoring:

No configuration required.
Monitoring via alarm contact on Sub-D 9p connector.

Input Specifications:

BNC female connector.
Frequency range: 1PPS to 50 MHz.
Impedance: 50 ohms or not loaded (selectable).
Nominal levels: Low level -0.5 to 1.5V, High level 3.5 to 10V.
Input qualification includes loss of signal-level detection.

Output Specifications:

BNC female connector.
Frequency range matches input signal (1PPS to 50 MHz).
Gain: 1.
Output levels: Low level 0 to 0.4V, High level 4.5 to 5.1V.
Impedance: 50 ohms.
Rise time: Less than 2ns.

Environmental Characteristics:

Operating temperature: 0 to 55°C.
Storage temperature: -10° to +60°C.
Humidity: 0 to 95% non-condensing.
MTBF: Greater than 900,000 hours.

Compliance and Safety:

EMC and ESD certified to EN55022: 2005 and EN55024: 2005.
Safety conformance to EN60950: 2001.

Mechanical Specifications:

19" rack mountable.
Dimensions: 43 x 484 x 310 mm (1U x 19’’ x 12’’).
Weight: Approximately 3kg (7 lbs) excluding packing.
Connector access at the rear.

Note: Specifications are subject to change without prior notice.

Catalog excerpts

OSA 5030 PPS Distribution Unit High quality synchronization distribution solution for OEM and Integrators PROFESSIONAL COMMUNICATION DIGITAL BROADCASTING TIME & FREQUENCY TIME DISTRIBUTION A compact, cost efficient, high quality PPS distribution solution for OEM and integrators Reliable, low cost, compact Input frequency 1PPS to 50 MHz maximum BNC connectors for all inputs and outputs The OSA 5030 is specifically designed for applications where the square wave is the only acceptable type of signal. The OSA 5030 PPS Distribution Unit is very easy to install. The unit does not require any type of configuration as the output signals are direct image of input signal. The rack-mount unit is easily installed and smoothly integrates with existing equipment. Several OSA 5030 can be placed in cascade to extend total output capacity Applications Time and frequency distribution unit Any system requesting square wave distribution Oscilloquartz SA Brévards 16 2002 Neuchâtel Switzerland

Open the catalog to page 1

OSA 5030 PPS Distribution Unit High quality synchronization distribution solution for OEM and Integrators Power supply: Environmental characteristics: Storage temperature: Alarm contact on Sub-D 9p connector (normally open or closed) Input specifications: Frequency range: 50 ohms or not loaded (Selection by switch) Nominal level: Low level: -0.5 to 1.5V High level: 3.5 to 10V Mechanical: 19" rack mount Input qualification: Connector access: Loss of signal-Level detection Output specifications: Frequency range: Output level: Low level: 0 to 0.4V High level: 4.5 to 5.1V Rise time: Subject to change...

Open the catalog to page 2

OSA 5030 PPS Distribution Unit

OSA 5030 PPS Distribution Unit

Catalog excerpts

All Oscilloquartz SA catalogs and technical brochures