*mydirectindustry

Catalogs
Oscilloquartz SA
OSA 5020 Low Noise Distribution

OSA 5020 Low Noise Distribution

Product catalog summary

Overview: The OSA 5020 Low Noise Distribution unit by Oscilloquartz SA is a compact and cost-efficient frequency distribution solution designed for OEMs and integrators. It is particularly suitable for applications requiring low phase noise, such as satellite tracking stations and time and frequency laboratories.

Key Features:

Reliable, low-cost, and compact design.
Supports input frequencies from 900 kHz to 50 MHz, with an optional range of 90 Hz to 20 MHz.
Provides 12 outputs with low additive phase noise.
Equipped with BNC connectors for all inputs and outputs.
Operates on an AC power supply ranging from 100-240 Vac.
Units can be daisy-chained to extend output capacity.

Applications:

Satellite ground stations.
Time and frequency distribution units.
Systems requiring low phase noise distribution.
DAB/DVB transmitters.

Technical Specifications:

Power Supply: 100 to 240 VAC, 47 – 63 Hz, ~20 VA consumption.
Configuration and Monitoring: No configuration required; alarm contact on Sub-D 9p connector for monitoring.
Input Specifications: BNC female connector, frequency range 900 kHz to 50 MHz (optional 90 Hz - 20 MHz), 50 ohms impedance, nominal level 1 Vrms.
Output Specifications: BNC female connector, frequency range as input, gain of 1, nominal level typically 1 Vrms, harmonic distortion < -40dB, non-harmonic distortion < -80dB, impedance 50 ohms, isolation > 90 dB.
Environmental Characteristics: Operating temperature 0 to 55°C, storage temperature -10° to +60°C, humidity 0 to 95% non-condensing, MTBF >900,000 hours.
Compliance: EMC and ESD certified to EN55022: 2005 and EN55024: 2005, safety conformance to EN60950: 2001.
Mechanical: 19" rack mount, dimensions 43 x 484 x 310 mm, weight ~3kg, rear connector access.
Output Phase Noise: Additive SSB phase noise at various frequencies: 1Hz -132 dB, 10Hz -150 dB, 100Hz -160 dB, 1kHz -165 dB, 10 kHz -165 dB.

Note: Specifications are subject to change without prior notice.

Catalog excerpts

Synchronization Distribution Solution for OEM and Integrators ■ Reliable, low cost, compact phase noise in daisy chain to extend total output capacity ■ Satellite ground stations distribution unit distribution unit A compact, cost efficient, high quality frequency distribution solution for OEM The OSA 5020 is specifically designed for applications where the phase noise characteristic is extremely important such as satellite tracking stations or time and frequency laboratories. The OSA 5020 Low Noise Distribution unit is very easy to install. The unit does not require any type of configuration as the output signals are direct image of input signal. The rack-mount unit is easily installed and smoothly integrates with existing equipment. equipment Signal ▼ An ADVA Optical Networking Company

Open the catalog to page 1

OSA 5020 Low Noise Distribution Synchronization Distribution Solution for OEM and Integrators Power supply: Environmental characteristics: Storage temperature: Configuration and monitoring: Configuration: Alarm contact on Sub-D 9p connector (normally open or closed) Input specifications: Frequency range: 50 ohms or not loaded: daisy chain (Selection by switch) Nominal level: Input qualification: Loss of signal-Level detection Connector access: Output specifications: Connector: Frequency range: 900 kHz to 50 MHz Optional: 90Hz - 20 MHz (as input signal) Nominal level: Typ. 1 Vrms Typ. 0.3 Vrms...

Open the catalog to page 2

OSA 5020 Low Noise Distribution

OSA 5020 Low Noise Distribution

Catalog excerpts

All Oscilloquartz SA catalogs and technical brochures