5200b
2Pages

Catalog excerpts

OSA 5200B GPS Clock Compact 19” 1U Rack Mountable GPS-based High Precision Clocks providing very High Stability and Accurate Frequency and Phase Introduction Functions The OSA 5200B is a very compact 1U high GPS-Based The OSA 5200B time and frequency is derived from the GPS. Clock providing higher grade time and frequency synchronization at minimal cost and minimal space. Based on the high performance Double Oven Oscillator OSA 8663, 4x 1 PPS and 4x 10 MHz outputs deliver time and frequency at a high level of accuracy and stability. The OSA 5200B can also integrate other variants of oscillators, such as the single oven OSA 8788 for better phase noise performance. Numerous configuration are available thanks to the OSA 5200B versatility, to easily adapting any requirements for base stations, broadcast station and such application, as a rack mountable timing clock solution. O SA 520 0B GPS w ith 4 Highlights x 1P PS a When locked, the OSA 5200B regenerates the reference and attenuates jitter and wander. When no valid GPS reference input is available, the OSA 5200B enters in hold-over mode and holds its output frequencies to supply long hours of frequency and phase accuracies. The OSA 5200B is also fully manageable thanks to its user-friendly Configuration Manager software Furthermore, the OSA 5200B is highly reliable and totally maintenance-free. nd 4 x 10M Hz o utpu t Typical Applications High frequency stability and long term accuracy, on both GPS-locked and Hold-over mode Base stations: WiMAX, WiBRO, 3G and 4G Economic, reliable and compact 1U high GPS Clock Broadcasting: DAB, DVB-T/DVB-H and DTV 4x 1PPS and 4x 10MHz outputs of each type Phase alignment of all outputs within ±10ns with “0 crossing” 1PPS / 10MHz Optional UTC-derived 1PPS and NMEA0183 timing information ITU- T G.811 / ST1 compliant when locked to GPS or ITU-T G.812 (I, V, VI) compliant holdover Oscilloquartz SA / Rue des Brévards 16 / CH-2002 Neuchâtel Switzerland / Tel.+41(0)32 722 55 55 / Fax+41(0)32 722 55 56 osa@ oscilloquartz.com / ww w.oscilloquartz.com

Open the catalog to page 1

Compact 19" 1U Rack Mountable GPS-based High Precision Clocks providing very High Stability and Accurate Frequency and Phase Typical Characteristics ■ Level: 1.0 VRMS ± 30%, Sine wave, 50 ■ Connector: BNC (other types on demand) ■ Phase alignment to 1PPS Output rising edge: ± 10ns ■ Level: 2.4VP P ± 20%, (AC-MOS), Square wave, 50 ■ Connector: BNC (other types on demand) Hold-Over performances Phase Noise (tracked mode) For lower Phase Noise, please contact factory. ■ RS-232C local manager on DB9 connector ■ Alarm dry relay contacts ■ TOD (Time-Of-Day) output compliant to NMEA0183 on ■...

Open the catalog to page 2

5200b 2Pages

Catalog excerpts

All Oscilloquartz SA catalogs and technical brochures

5200b
2Pages