*mydirectindustry

5030

Product catalog summary

Overview: The OSA 5030 PPS Distribution Unit is a compact, cost-efficient, and high-quality synchronization distribution solution designed for OEMs and integrators. It is specifically tailored for applications requiring square wave signals and offers seamless integration with existing equipment.

Key Features:

Reliable and low-cost solution with a compact design.
Supports input frequencies from 1PPS to 50 MHz.
Provides 12 outputs with BNC connectors for both inputs and outputs.
Operates on an AC power supply ranging from 90-264 Vac.
Multiple units can be cascaded to increase output capacity.

Technical Specifications:

Power Supply: 90 to 264 VAC, 47-63 Hz, with a consumption of 10 W.
Environmental: Operating temperature from 0 to 55°C, storage temperature from -10° to +60°C, and humidity tolerance from 0 to 95% non-condensing. MTBF is over 900,000 hours.
Configuration and Monitoring: No configuration required; includes an alarm contact on a Sub-D 9p connector.
Compliance: Certified to EMC and ESD standards EN55022: 2005 and EN55024: 2005, with safety conformance to EN60950: 2001.

Input and Output Specifications:

Input: BNC female connector, frequency range from 1PPS to 50 MHz, impedance of 50 ohms or not loaded, and input levels from -0.5 to 10V.
Output: BNC female connector, frequency range matching input, output levels from 0 to 5.1V, and rise time of less than 2ns.

Mechanical Details:

19" rack mountable with dimensions of 43 x 484 x 310 mm and a weight of approximately 3 kg.
Rear connector access for ease of installation.

Note: Oscilloquartz SA reserves the right to change specifications without prior notice.

Catalog excerpts

A compact, cost efficient, high quality synchronization distribution solutior Typical applications A compact, cost efficient, high quality PPS distribu- tion solution for OEM and integrators The OSA 5030 is specifically designed for applica- tions where the square wave is the only acceptable The OSA 5030 PPS Distribution Unit is very easy to install. The unit does not require any type of con- figuration as the output signals are direct image of input signal. The rack-mount unit is easily installed and smoothly integrates with existing equipment. > Time and frequency distribution unit > Any system requesting square wave equipment Signal > Reliable, low cost, compact > BNC connectors for all inputs and outputs cascade to extend total output capacity Oscilloquartz SA / Rue des Brevards 16 / CH-2002 Neuchatel [email protected] / www.oscilloquartz.com SWATCH GROUP ELECTRONIC SYSTEMS

Open the catalog to page 1

A compact, cost efficient, high quality synchronization distribution solutior Typical Characteristics Power supply: Alarm contact on Sub-D (normally open or closed) Environmental characteristics: Input specifications: Loss of signal-Level detection Output specifications: Oscilloquartz SA reserves the right to change all specifications contained herein at any time without prior notice. Oscilloquartz SA / Rue des Brevards 16 / CH-2002 Neuchatel [email protected] / www.oscilloquartz.com SWATCH GROUP ELECTRONIC SYSTEMS

Open the catalog to page 2

5030

5030

Catalog excerpts

All Oscilloquartz SA catalogs and technical brochures