OCL-490-20 GE565
7Pages

Ceramics – Conversion, with lens Features:  with lens, view angle 20°  size 6.0(L) x 4.6(W) x 4.3(H) mm  circuit substrate: AlN Ceramics  devices are ROHS and REACH conform  lead free solderable, soldering pads: gold plated  thermal pad electricaly insulated  taped in 16 mm blister tape, cathode to transporting perforation  all devices sorted into luminous intensity classes  taping: face-up (T) Merkmale:  Mit Linse, Öffnungswinkel 20°  Größe: 6,0 x 4,6 x 4,3 mm  Gehäusematerial: AlN Keramik  Bauteile sind ROHS und REACH konform  Bleifrei lötbar, Lötpads: vergoldet  Thermopad elektrisch isoliert  Gegurtet in 16 mm Blistergurt, Kathode zur Transportperforation  Alle Bauteile in Intensitätsklassen sortiert  Gurtung: Face-up (T)  Typical Electro-Optical Characteristics Typische Elektrooptische Eigenschaften Measurement conditions Messbedingungen Parameter Emitting Color Farbe Forward Voltage (2) Flussspannung Peak Wavelength (2) Peak Wellenlänge FWHM (1) Halbwertsbreite Radiant Intensity (2) Strahlstärke Reverse Current (3) Sperrstrom (1) (2) (3) Tambient = 23 °C; ttest ≤ 60ms Symbol Typ Max Green, conversion from blue Grün, konvertiert aus Blau Typical property, not 100% tested 100% measured in an automated test system with max 60 ms operation LED should never be operated with reverse bias Copyright © 2019 OSA Opto Light GmbH. All Rights Reserved

Ceramics – Conversion, with lens OCL-490-20 GE565  Maximum Ratings Grenzwerte Parameter Forward Current Flussstrom Forward Current, pulsed tp≤100μs, =1:10 Flussstrom, gepulst (3) Reverse Voltage Sperrspannung Thermal Resistance, Junction - Soldering Wärmewiderstand, Sperrschicht - Lötstelle Operating Temperature Betriebstemperatur Storage Temperature Lagertemperatur Electrostatic discharge classification (MIL-STD-883) Elektrostatische Empfindlichkeit Outline Drawing Zeichnung Recommended Soldering Pad Empfohlenes Lötpad Marking at anode Markierung an der Anode Copyright © 2019 OSA Opto...

Ceramics – Conversion, with lens OCL-490-20 GE565  Typical Performance Diagram Typische Kennlinien 1000 Forward Current vs. Forward Voltage Flussstrom über Flussspannung Intensity vs. Forward Current Strahlstärke über Flussstrom Max. Forward Current vs. Ambient Temperature Max. Flussstrom über Umgebungstemperatur Spectrum Spektrum Copyright © 2019 OSA Opto Light GmbH. All Rights Reserved View Angle Abstrahlung www.osa-opto.com preliminary edition

Ceramics – Conversion, with lens OCL-490-20 GE565  Soldering Conditions Lötprofile 300 10...20s IR reflow soldering profile for lead containing solder IR Reflow Lötprozess für bleihaltiges Lot IR reflow soldering profile for lead free soldering IR Reflow Lötprozess für bleifreies Lot Not applicable for manual Soldering. Für manuelles Löten nicht geeignet. Copyright © 2019 OSA Opto Light GmbH. All Rights Reserved www.osa-opto.com preliminary edition 3

Ceramics – Conversion, with lens OCL-490-20 GE565  Ordering Code For Parts Kodierung der Bestellnummer Series Serie View Angle Abstrahlwinkel Color Farbe Encapsulation Verguss - XE XG Type definition, e.g. Typenbezeichnung z.B. – with lens, epoxy – with lens, glass Tape And Reel Packing Gurt und Spule Copyright © 2019 OSA Opto Light GmbH. All Rights Reserved www.osa-opto.com preliminary edition 3/1

Ceramics – Conversion, with lens The reel is sealed in special plastic bag with integrate ESD protection including a silica dry-pack. Shelf life for sealed bag 12 month on max. 30°C and 60% Rh. Floor life 12 month for Europe or 6 month for all other countries on max. 30°C and 60% Rh in a dust free environment. Other bags (i.e. MBB, HIC, Vacuum pack, etc.) on request. Die Rolle wird zusammen mit einem Trockenmittelbeutel in einem HighshieldAntistatic-Beutel verschweißt. Lagerzeit für den verschweißten Beutel beträgt 12 Monate bei max. 30°C und 60% Rh. Lagerzeit bei geöffnetem Beutel 12...

Ceramics – Conversion, with lens OCL-490-20 GE565 Attention please The information describes the type of component and shall not consider as assured characteristics. Terms of delivery and rights to change reserved. The data sheet may change without prior information; the valid issue will be on our webpage in internet. Due to technical requirements components may contain dangerous substances. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. OSA opto light GmbH does not have the responsibility for the...