Features:  size 3,5(L) x 3,5(W) x 1,55(H) mm  circuit substrate: AlN Ceramics  devices are ROHS and REACH conform  lead free solderable, soldering pads: gold plated  taped in 12 mm blister tape, cathode to transporting perforation  taping: face-up (T) Merkmale:  Größe: 3,5 x 3,5 x 1,55 mm  Gehäusematerial: AlN Keramik  Bauteile sind ROHS und REACH konform  Bleifrei lötbar, Lötpads: vergoldet  Gegurtet in 12 mm Blistergurt, Kathode zur Transportperforation  Gurtung: Face-up (T)  Typical Electro-Optical Characteristics Typische Elektrooptische Eigenschaften Measurement conditions Messbedingungen Parameter Emitting Color Farbe Forward Voltage (2) Flussspannung Peak Wavelength (2) Peak Wellenlänge FWHM (1) Halbwertsbreite Radiant Intensity (2) Strahlstärke Reverse Current (2) Sperrstrom Tambient = 23 °C; ttest ≤ 60ms Symbol Typical property, not 100% tested 100% measured in an automated test system with max 60 ms operation Copyright © 2020 OSA Opto Light GmbH. All Rights Reserved

OCI-450 IT755  Maximum Ratings Grenzwerte Parameter Forward Current Flussstrom Forward Current, pulsed tp≤100μs, =1:10 Flussstrom, gepulst Reverse Voltage Sperrspannung Thermal Resistance, Junction - Soldering Wärmewiderstand, Sperrschicht - Lötstelle Operating Temperature Betriebstemperatur Storage Temperature Lagertemperatur Electrostatic discharge classification (MIL-STD-883) Elektrostatische Empfindlichkeit Outline Drawing Zeichnung Marking at Anode Markierung an der Anode Copyright © 2020 OSA Opto Light GmbH. All Rights Reserved www.osa-opto.com preliminary edition 12/20 Page/

OCI-450 IT755  Typical Performance Diagram Typische Kennlinien 1000 Forward Current vs. Forward Voltage Flussstrom über Flussspannung Intensity vs. Forward Current Strahlstärke über Flussstrom Forward Current vs. Shift Peak Wavelength Flussstrom gegen Verschiebung der Wellenlänge Spectrum Spektrum Copyright © 2020 OSA Opto Light GmbH. All Rights Reserved View Angle Abstrahlung www.osa-opto.com preliminary edition 1

OCI-450 IT755  Soldering Conditions Lötprofile 300 10...20s IR reflow soldering profile for lead containing solder IR Reflow Lötprozess für bleihaltiges Lot IR reflow soldering profile for lead free soldering IR Reflow Lötprozess für bleifreies Lot Manual Soldering: Manuelles Löten: max power of iron 25W / 300°C for 3s Max. Leistung des Lötkolben 25W / 300°C für 3s Copyright © 2020 OSA Opto Light GmbH. All Rights Reserved www.osa-opto.com preliminary edition 1

OCI-450 IT755  Ordering Code For Parts Kodierung der Bestellnummer Series Serie Color Farbe Encapsulation Verguss X Type definition, e.g. Typenbezeichnung z.B. – uncolored clear Tape And Reel Packing Gurt und Spule Copyright © 2020 OSA Opto Light GmbH. All Rights Reserved www.osa-opto.com preliminary edition 12/20 Pa

The reel is sealed in special plastic bag with integrate ESD protection including a silica dry-pack. Shelf life for sealed bag 12 month on max. 30°C and 60% Rh. Floor life 12 month for Europe or 6 month for all other countries on max. 30°C and 60% Rh in a dust free environment. Other bags (i.e. MBB, HIC, Vacuum pack, etc.) on request. Die Rolle wird zusammen mit einem Trockenmittelbeutel in einem HighshieldAntistatic-Beutel verschweißt. Lagerzeit für den verschweißten Beutel beträgt 12 Monate bei max. 30°C und 60% Rh. Lagerzeit bei geöffnetem Beutel 12 Monate in Europa oder 6 Monate für alle...

OCI-450 IT755 Attention please The information describes the type of component and shall not consider as assured characteristics. Terms of delivery and rights to change reserved. The data sheet may change without prior information; the valid issue will be on our webpage in internet. Due to technical requirements components may contain dangerous substances. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. OSA opto light GmbH does not have the responsibility for the reliability and the degradation behavior of...