Safety, slipping and starting clutches
4Pages

Ortlinghaus – Plates. Clutches. Brakes. Systems. Safety, slipping and starting clutches

Ortlinghaus multiplate safety clutches are permanently engaged, this condition being maintained by spring pressure. They are able to transmit torque up to a particular, pre-set level, after which in the case of an overload in the transmission, they are designed, to slip for a limited period of time. They can thus be used to safeguard all types of transmission lines in machines and equipment from overloading and destruction. They have the task of smoothing out high torque peaks, at start ups, and during the operating of a line. This is done by the clutch plates slipping past each other for a...

Safety, slipping and starting clutches Outer and inner drivers mounted individually Outer driver mounted on inner one Outer diam. mm 70 to 210 210 to 750 70 to 270 Series 0600-424/-474 0600-070/-072 0700 Torque range Nm 9 to 1600 90 to 90000 9 to 1600 Hub hole mm 10 to 80 30 to 300 10 to 80 Spring-engaged multiplate slipping clutches for dry-running or wet-running. 1/2/3 Series 0600 und 0700 The principle of a spring loaded set of plates is the same with all sizes of clutch and all types. However variations are possible in the following areas: - The friction combination selected can be...

Fax questionnaire for safety, slipping and starting clutches Please complete in block capitals! Sender: Name, first name Company Department Telephone (extension) Fax Recipient: Ortlinghaus-Werke GmbH Kenkhauser Straße 125 · Postbox 14 40 42907 Wermelskirchen · Germany Tel. +49 2196 85-0 · Fax +49 2196 855-444 info@ortlinghaus.com · www.ortlinghaus.com for the attention of (if known) Fax-No. +49 2196 855-444 Driving machine: Electric motor Combustion engine Hydraulic motor Other: Transmission situation: ___________________________________________________________________________...