Ortlinghaus Plates.Clutches. Brakes. Systems. >

Clutch/brake combined units for wet-running > Clutch/brake combined units are recognised as being safe and reliable for driving presses, metal-forming and machine tools, shears and similar machines. They conform with the well known safety requirements as laid down in the relevant EC directives. The torque transmitting capability and the switching capacity can be influenced over a wide range, by the correct selection of the number of friction surfaces. The heat generated from a particular application can be dissipated efficiently with the aid of a carefully designed cooling oil system. The shaft...

Spring-applied, hydraulically releasedmulti-plate brakes for wet- or dry-running, non centering Sinus multi-plate clutches forwet-running; version for high torques 4 Series 0021-3.3 > A clutch for heavy-duty drives; normal version with shoulder housing and without Γemergency engagement facility. A version with ӓemergency engagement facility is also available. Large hub bores are possible. These clutches can be manufactured to conform to the acceptance conditions of the classification institutions for marine engineering. Friction combination: Steel/sinter lining Pressure and cooling oil intake:...

Spring-applied, hydraulically releasedmulti-plate brakes for wet- and dry-run- ning with dual internal centering facility Spring-applied, hydraulically releasedmulti-plate brakes for wet- and dry-running with internal and external centering facility plate chamber, depending upon the particularapplication. The brakes can be released mechanically in the case of a hydraulic system failure (emergency release facility). Friction combination: Steel/sinter lining for wet or dry-running Pressure oil intake: On outside of diameter of sta- tionary cylinder. Operating pressure: max. 320 bar Application:...