hydraulically actuated clutches and brakes
6Pages

I THE TECHNOLOGY OF CONTROLLED TORQUE ■ Hydraulically actuated clutches dutch/brake combined units Ortlinghaus - Plates. Clutches. Brakes. Systems.

Hydraulically actuated clutches and spring-applied brakes clutch/brake combined units Clutch/brake combined units for wetrunning Thanks to the large force available for actuation and the use of the steel/sinter combination, which has very low wear characteristics, hydraulically actuated Ortlinghaus Sinus® multi-plate clutches, brakes and clutch/brake combined units are suitable for a range of applications in mechanical engineering, motor vehicles and transmission systems. The cooling oil, which is led through the plates in a precise manner, allows the heat, which varies depending on the...

Sinus® multi-plate clutches for wet-running; version for high torques A clutch for heavy-duty drives; normal version with shoulder housing and without “emergency engagement facility“. A version with “emergency engagement facility“ is also available. Large hub bores are possible. These clutches can be manufactured to conform to the acceptance conditions of the classification institutions for marine engineering. Friction combination: Steel/sinter lining Pressure and cooling oil intake: Via rotary inlet through the shaft. Operating pressure: 25 bar Areas of application: Used in marine...

plate chamber, depending upon the particular application. The brakes can be released mechanically in the case of a hydraulic system failure (emergency release facility). Friction combination: Steel/sinter lining for wet or dry-running Pressure oil intake: On outside of diameter of stationary cylinder. Operating pressure: max. 320 bar Application: Extensively used throughout the field of mechanical engineering especially as brakes for hydraulic motors used in cranes and winches. Spring-applied, hydraulically released multi-plate brakes for wet- and dry-running with internal and external...

Ortlinghaus has available a comprehensive range of accessories for operating hydraulically actuated clutches and brakes and to permit these to be correctly intergrated into the particular machine design. We can supply! - Single and multi-channel rotary inlets (see also special catalogue) - Press safety valves, - Complete clutch-brake controls in modular design - Complete hydraulic power packs for supplying clutch/brake combined units with pressure and cooling oil - Cooling systems in the form of oil/air or oil/water heat exchangers - Sealed housing covers for enclosing clutch/brake combined...

for dutches and brakes in general as well as in particular dutches and brakes for presses Sender: Recipient: Ortlinghaus-Werke GmbH Kenkhauser Straße 125 · Postbox 14 40 42907 Wermelskirchen · Germany Tel. +49 2196 85-0 · Fax +49 2196 855-444 info@ortlinghaus.com · www.ortlinghaus.com Name, first name Company Department Telephone (extension) For press clutches and brakes: Actuation type: Actuation type: pneumatic Arrangement: Clutch and brake separated spring-applied Drive machine: with auxiliary brake Fitting position: Combustion engine Elektric motor Auxiliary brake Clutch and brake...