Catalog excerpts
DSPEC Pro Advanced, Digital Gamma-Ray Spectrometer for HPGe Detector Systems AMETEK ADVANCED MEASUREMENT TECHNOLOGY
Open the catalog to page 1
DSP EC Pro DSPEC Pro: Advancing the Art of Digital Gamma-Ray Spectroscopy The immense versatility of DSPEC Pro, brought about by the number of unique features and modes of operation, means that it is an ideal solution for a wide variety of applications. Its neat and compact packaging further enhance its applicability. Digital spectrometers are inherently more stable than the analog variety of years gone by, and since the introduction of the original DSPEC, ORTEC has achieved the reputation as the supplier of instruments which represent the benchmark in stability, both relating to...
Open the catalog to page 2
DSP EC Pro For Enhancement of Resolution in Large or Neutron Damaged Detectors Ballistic Deficit and Charge Trapping Correction The trapezoidal digital filter in the DSPEC Pro is held in common with all other ORTEC DSPEC family members. It allows adjustment of the filter to optimize the resolution performance of large HPGe detectors which can often suffer low-side peak tailing if ballistic deficit is present. These large detectors are finding increasing use in low level counting applications. The adjustment is largely automated by the use of the "OPTIMIZE" feature and may be monitored by...
Open the catalog to page 3
The DSPEC Pro provides high speed control via standard USB 2.0 to any Windows 2000/XP system. The plug-and-play feature makes installation simple. A nearly unlimited number of DSPEC Pro or other ORTEC USB instruments can be connected simultaneously using USB hubs. As an ORTEC CONNECTIONS compatible instrument, DSPEC Pro works in a networked and a stand-alone configuration. ORTEC CONNECTIONS means: any hardware, any software, anywhere in the laboratory with full seamless control and built-in security.
Open the catalog to page 4
Display: 240 x 160 pixel backlit LCD provides status information, instrument ID, bias information, live and real time. Concurrent Connections: Limited by the computer and supporting USB hubs. ORTEC CONNECTIONS software supports up to 127 USB connected devices per computer. System Gain Settings: Coarse Gain: 1,2, 4, 8, 16, or 32. Fine Gain: 0.45 to 1. The available range of gain settings supports all types of HPGe detectors. Specifically the following maximum energy values are achievable using the standard ORTEC preamplifier (max gain to min gain): COAX 187 keV to 12 MeV LO-AX 94 keV to 6...
Open the catalog to page 5
DSP EC Pro Detector High Voltage Supplies Detector Interface Module (DIM): DSPEC Pro offers high voltage supply flexibility in the form of a microprocessor controlled module, which connects the specific detector to the MCA. On a SMART-1 HPGe detector, the HV module is integral with the detector itself. For "legacy" or "non-SMART-1" detectors, the HV supply is in the form of a Detector Interface Module or "DIM" with 2 m cables. The DIM has a mating connector for the traditional detector cable set: 9-pin D preamp power cable, Analog In, Shutdown In, Bias Out, and Inhibit In. DIMS for...
Open the catalog to page 6
Model Description CFG-ICS-P4 Specifies a DSPEC Pro; 80% GEM PopTop detector with SMART-1 technology; and an Integrated Cryocooling System
Open the catalog to page 7
Specifications subject to change 100919 www. ortec-online, com Tel. (865) 482-4411 • Fax (865) 483-0396 • ortec.info@ametek.com 801 South Illinois Ave., Oak Ridge, TN 37830 U.SA For International Office Locations, Visit Our Website
Open the catalog to page 8All ORTEC catalogs and technical brochures
-
RADEAGLET-R12 Pages
