DSPEC LF™ ORTEC® High-Performance Digital Signal Processor for Gamma Spectroscopy
4Pages

{{requestButtons}}

Catalog excerpts

DSPEC LF™ ORTEC® High-Performance Digital Signal Processor for Gamma Spectroscopy - 1

DSPEC LF High-Performance, Digital Signal Processor for Gamma Spectroscopy AMETEK ADVANCED MEASUREMENT TECHNOLOGY

Open the catalog to page 1
DSPEC LF™ ORTEC® High-Performance Digital Signal Processor for Gamma Spectroscopy - 2

DSP EC LF • Full-featured, digital spectrometer for HPGe and NaI detectors • Automatic optimization for best detector performance (patented) • ORTEC SMART-1™ intelligent HPGe support • Continuous display of detector status and state-of-health information • Fast data transfer for live spectrum display • Easy installation with true plug-and-play on USB 2.0 • Excellent temperature and count rate stability • MAESTRO MCA Emulation Software included • Full computer control of every function . . . in a compact package at an economical price. DSPEC LF is a member of the DSPEC USB family of digital...

Open the catalog to page 2
DSPEC LF™ ORTEC® High-Performance Digital Signal Processor for Gamma Spectroscopy - 3

Mix-and-Match with Your Existing MCBs ORTEC Connections software supports any combination and number of USB devices connected to any computer. For example, two digiDARTs may be combined with two DSPEC LFs connected to the same PC using a USB hub. And any number of other ORTEC MCBs can be connected to the same system by network, printer port, RS-232, or Dual Port Memory. System Specifications Display: 240 x 160 pixel backlit LCD provides status information, instrument ID, bias information, live and real time. Concurrent Connections: Limited by the computer and supporting USB hubs. ORTEC...

Open the catalog to page 3
DSPEC LF™ ORTEC® High-Performance Digital Signal Processor for Gamma Spectroscopy - 4

Detector High Voltage Supplies DSPEC LF offers high voltage supply flexibility in the form of a microprocessor controlled module, which connects the specific detector to the MCA. On a SMART-1 HPGe detector, the HV module is integral with the detector itself. For "legacy" or "non-SMART-1" detectors, the HV supply is in the form of a Detector Interface Module or "DIM" with 2 m cables. The DIM has a mating connector for the traditional detector cable set: 9-pin D preamp power cable, Analog In, Shutdown In, Bias Out, and Inhibit In. DIMS for non-SMART-1 detectors are available with the...

Open the catalog to page 4

All ORTEC catalogs and technical brochures

  1. RADEAGLET-R

    12 Pages