Hydraulic hedge mowers | PROFESSIONAL SERIES

FAST-TRONIC ELECTRO-PROPORTIONAL COMPENSATED COMMAND ALL THE 5 OR 4 ELECTRO-PROPORTIONAL COMPENSATED MOVEMENTS ADJUSTABLE BY OPERATOR VIA 4.5” GRAPHIC DISPLAY Ergonomic joystick with a robust 4.5" high visibility colour screen display. The advantage of controls with CAN-BUS technology with the reduced dimensions of electric cables in the cab for all control communications. The FAST-TRONIC command has 5 or 4 proportional, fully compensated movements. The joystick is ergonomically designed to allow the operator to work with minimal arm movement, in total comfort, for long hours. All the movements...

PROFESSIONAL SERIES SIMULTANEOUS MOVEMENTS JOYSTICK WITH 5 ELECTRO-PROPORTIONAL COMPENSATED MOVEMENTS AVAILABLE ONLY ON PROFESSIONAL SERIES An ergonomic and highly sensitive joystick where everything in the palm of one hand. Very small footprint in the cockpit, the joystick puts the operator in complete control via a small electrical cable. The SMART-TRONIC V2.1 command has all of the movements proportional and compensated which allow a simultaneous use without having any losses in pressures or functions that slow down or freeze. The 1st and 2nd boom are controlled by the joystick and the rotor...

ARM ENDING AND JOINT GROUP IN CAST IRON

why we use Hardox? Hardox® 450 The most popular abrasion-resistant steel with excellent structural properties. Hardox® 450 is an abrasion-resistant steel with a nominal hardness of 450 HBW. Hardox® 450 combines good bendability and weldability with an option for guaranteed impact toughness (Hardox® 450 Tuf). The products can be used in many different components and structures that are subject to wear. Hardox® 450, with an extra 50 Brinell hardness over our 400 grade, provides better dent and abrasion resistance as well as longer wear life, so you can achieve even greater savings. why we use Strenx?...

HYDRAULIC SYSTEM Temperature stability, protection of hydraulic pumps and valves HIGH PERFORMANCE GEAR PUMP AND MOTOR MANUAL EMERGENCY LEVERS OVERCENTER VALVES (only smart-tronic and fast-tronic) SMART AND FAST-TRONIC, ELECTRO PROPORTIONAL AND COMPENSATED MONOBLOCK VALVE 6 CAST-IRON GEARBOX FILTERING SYSTEM TO PROTECT HYDRAULIC COMPONENTS

80HP HYDRAULIC AXIAL-PISTON PUMP AND MOTOR TRANSMISSION WITH TOOTHED PULLEYS AND SINGLE BELT IN KEVLAR www.orsigroup.IT

TRACTOR ATTACHMENTS BRACKET (optional) For use in conjunction with stabilizers If the tractor is not equipped with suitable anchorage points for stabilizers. STABILIZERS HITCH PLATE (recommended options) Some tractors are equipped with a sledge tow hook. This type of attachment for tensioners makes the mounting of the hedge cutter on the tractor more rigid.

RAPID LINK RAPID LINK (recommended options) Much stronger and more stable mounting frame than the tractor linkage. Quick assembly and disassembly.

LEVELING SYSTEMS NO SUSPENSION A continuous manual input is required. CUTTING HEAD WITH FLOATATION SYSTEM Allows the cutting head to follow automatically the shape of the ground in a vertical plane, reducing the required manual inputs on the joystick from the operator and increasing the comfort. Available on every Orsi Group Reach Mower.

*VERTICAL FLOAT Semi-automatic floatation system of the cutting head on the ground, reduces the number of manual inputs and increases the comfort while working. *ACTIVE FLOATING PLUS Automatic floatation system of the cutting head on the ground, with augmented reactivity and bigger floating excursion. *ASC - AUTOMATIC LEVELING SYSTEM High professional system which minimizes the need of manual inputs from the operator. VERTICAL FLOAT A hydropneumatic suspension which allows the cutting to follow the shape of the ground on a vertical plane. It reduces significantly the need of manual actions to...

CUTTING HEADS CUTTING HEAD PROF PROFESSIONAL REAR ROLLER Ø 140 mm with 4 taper roller bearings, mud scraper and interchangeable central body. DIRECT TRANSMISSION BELTS TRANSMISSION DIRECT TRANSMISSION BELTS TRANSMISSION Double frame Multi-knife rotor Oscillating bearings with double rows of balls Hardox counter knife Cutting Head with floating and self-leveling system Head rotation Double rotation of the rotor Professional rear roller Ø 140 mm (Ø 5,5") with 4 roller bearings, mud scraper and interchangeable central body Transmission with toothed pulleys and single belt in Kevlar Hydraulically...

DIRECT TRANSMISSION BELTS TRANSMISSION HYDRAULICALLY ADJUSTABLE FRONT HOOD (optional) SKIDS (standard) The hydraulic motor is installed directly on the side of the cutting head, protected by a robust carter. The hydraulic motor is installed internally; the power output is transmitted by belts and pulleys. The size is significantly reduced allowing to work in narrow spaces.. Standard equipment in all PROF cutting heads, substitutable in a few minutes. REAR ROLLER ADJUSTABLE IN HEIGHT (standard) FRONT PROTECTION CHAINS (optional) 105 cm (41") / 125 cm (49") / 150 cm (59")

PROF PS DIRECT TRANSMISSION CUTTING HEADS ROTOR / tools MULTI-KNIFE ROTOR GRASS, RUSHES AND WOOD max Ø 5 cm / 2" GRASS, RUSHES AND WOOD max Ø 5 cm / 2" WOOD max Ø 3/4 cm - 1,2"/1,6" gear pump max Ø 8 cm / 3,2" piston pump SYSTEM KIT KOMPRESSOR GRASS, RUSHES AND WOOD max Ø 6/7 cm - 2,5"/2,7" FOR MULTI-KNIFE ROTOR, SPECIFY THE CHOICE TOOL AT TIME OF

BELTS TRANSMISSION DIRECT TRANSMISSION BELTS TRANSMISSION BELTS TRANSMISSION ROTOR WITH Y KNIVES SEMI-FOREST ROTOR WITH RETRACTABLE HAMMERS VENTILATOR ROTOR

LEADER GP STRENGTHS POINTS BUMPER WITH LIGHTS A LED, EXTENDABLE FOR TRANSPORT ROAD HYDRAULIC SHOCK ABSORBER ON THE ROTATION, WITH AUTOMATIC RETURN TO AN ADVANCED POSITION which can be disabled with a mechanical (classic) or electrical valve (Smart-tronic and Fast-Tronic). Available starting from the 1/01/2024 ONLY 815T RAMS POSITIONATED ON 1ST AND 2ND ARM to facilitate additional reach over obstacles, road signs. ELEMENTS AND HINGES IN PRESSED STEEL ON THE JOINTS 16