JSG Single knit machine designed for production of plain terry in course gauge The knitting head is incorporated onto Orizio’s new standard frame fitted with an integrated ORITEC control panel which visibly shows the following information: • • • • • • diagnostic warning signals built-in preparation for incorporated yarn/fabric measuring program built-in preparation for incorporated fabric scanner production data recorded and memorised for 30 days Usb connection for quick software update Automatic shift change Terry gauge 7, 8 e 10 0.8 feed per diametrical inch machine. The production of quality fabrics is possible thanks to closed needle cam tracks and the standard fitting ceramic yarn guides. Cylinder cam boxes predisposed to get up to 3 cam tracks. The 3 cam tracks (optional) permit the execution of small designs and structures on the ground fabric. ORIZIO Srl - Via L. Galvani,24 25064 Gussago (Bs), Italy - [email protected] - www

OPTIONAL ACCESSORIES “Oritec” electronic control. Storage-type positive feeding units to feed both ground and loop yarns. Plain terry kit to knit basic structure on the ground side: choice of cams for the second and third cam tracks. Kit for plain jersey stitches 3 cam tracks (JOGN). Dust/sludge extractor device from needles and sinker zone. Micrometrical stitch adjustment at each feed. Wear-resistant, steel yarn carriers. Circular creel, antistatic creel, closed creel with automatic yarn air threading device. Yarn consumption measuring device (LFA). Needles and sinkers automatic lubrication...