Catalogs >
Oring Industrial Networking Corp. >
TINJ-101-M12(-24V) Series

TINJ-101-M12(-24V) Series
5Pages

Catalog excerpts

Designed for Rugged Excellence TINJ-101-M12 Series EN50155 Industrial 1-port FET PoE Injector with 30W output, M12 connector Features  PoE Injector for 1x10/100 Base-T(X)  Fully compliant with IEEE802.3at/802.3af standard  Auto protection for Over Voltage Power Input and over current output  Supports Power Output up to 30Watts  Supports Power Input range from 12V ~ 57VDC  Delivers power up to 100 meters  Ultra-rugged enclosure M12 connector for toughest industrial usages  Wall mounting enabled Introduction ORing’s TransporterTM series PoE Injectors are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TINJ-101-M12 PoE Injector is an advanced IEEE802.3at compliant device with Intelligent Detection that provided 1-port 10/100 Base-T(X) PoE output which is compliant with EN50155 requirement. It is specifically designed for the toughest industrial environments. TINJ-101-M12 EN50155 PoE Injector use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. this intelligent detection, only an IEEE 802.3at/802.3af compliant device can be powered with the TINJ-101-M12 PoE Injector. Typically in Ethernet networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. The TINJ-101-M12 PoE Injector can function with any PoE P.D. equipment which is fully compliant with Note: The equipment being powered must be fully IEEE 802.3at/802.3af compliant in order for the power supply to be able to sense the PoE devices signature and apply power. Power is supplied on Ethernet pins 2/4 (V+) and 1/3 (V-). * All specifications are subject to change

Open the catalog to page 1

Designed for Rugged Excellence Power Supply ORing STransP°rtBr

Open the catalog to page 2

Designed for Rugged Excellence Dimension (Unit=mm) ORing gn""rw*

Open the catalog to page 3

Designed for Rugged Excellence Connector and Pin Definition 10/100 Base-T(X) M12 Input (Data Only) M12 Output (Data and Power) Data Receive Data Transmit Data Receive Data Transmit Description Data Receive and Feeding power(-) Data Transmit and Feeding power(+) Data Receive and Feeding power(-) Data Transmit and Feeding power(+) Note: pins 1 and 3 (-Vdc) should not be shorted to ground Specifications ORing Injector Model Physical Ports 10/100 Base-T(X) with P.S.E. Ports in M12 Auto MDI/MDIX 10/100 Base-T(X) Port in M12 Auto MDI/MDIX Operating Voltage Input Voltage Output Power LED...

Open the catalog to page 4

Designed for Rugged Excellence Free Fall Port Number Model Name Available Model EN50155 Industrial 1-port FET PoE Injector with 30W output, 50V~57VDC Input,M12 connector EN50155 Industrial 1-port FET PoE Injector with 30W output, 12V~57VDC Input,M12 connector * All specifications are subject to change without noti

Open the catalog to page 5