IGS-9164GF／FX Series
6Pages

Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch Industrial Ethernet Switch Industrial 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX or 1000Base-X fiber ports ▪ Supports O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy ▪ Open-Ring support the other vendor's ring technology in open architecture ▪ O-Chain allow multiple redundant network rings ▪ Supports standard IEC 62439-2 MRP*NOTE (Media Redundancy Protocol) function ▪ Supports IEEE 1588v2 clock Synchronization ▪ Supports IPV6 new internet protocol version ▪ Supports Modbus TCP protocol ▪ Provided HTTPS/SSH protocol to enhance network security ▪ Supports IEEE 802.3az Energy-Efficient Ethernet technology ▪ Supports SMTP client ▪ Supports IP-based bandwidth management ▪ Supports application-based QoS management ▪ Supports Device Binding security function ▪ Supports DOS/DDOS auto prevention ▪ IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic ▪ Supports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management ▪ Support ACL, TACACS+ and 802.1x User Authentication for security ▪ Supports 9.6K Bytes Jumbo Frame ▪ Multiple notification for warning of unexpected event ▪ Supports “DBU-01” backup unit for quickly configuration backup/restore ▪ Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration ▪ Support LLDP Protocol ▪ Rigid IP-30 housing design ▪ DIN-Rail and wall mounting enabled Introduction IGS-9164GF/FX series are managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4-port fixed optical fiber port. IGS9164GF provided 4x1000Base-X fiber ports and IGS-9164FX provided 4x100Base-FX fiber ports. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) /Open-Ring/O-Chain/MRP*NOTE/Fast Recovery and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 to 75oC. IGS-9164GF/FX series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application. ▪ O-Ring : O-Ring is ORing's proprietary redundant ring technology, with recovery time of less 30 milliseconds and up to 250 nodes. The O-Ring r edundant ring technology can protect mission-critical application from network interruptions or temporary malfunction with its fast recover technology. *NOTE: This function is available by req

Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch ring technologies. It enables ORing's switches to form a single ring with other vendor's switch. In cases where the ring is setup using proprietary technology, ORing offers a compatibility service where ORing can make its switches compatible with your particular network requirements. ▪ O-Chain : O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy topology for any backbone Industrial Ethernet Switch ▪ Open-Ring : Open-Ring is an enhanced redundant technology that makes...

Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch Industrial Ethernet Switch Open-Vision ORing's switches are intelligent switches. Different from other traditional redundant switches, ORing provides a set of Windows utility (Open-Vision) for user to manage and monitor all of industrial Ethernet switches on the industrial network. Host Monitor Topology View

Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch Specifications ORing Switch Model 10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX Ethernet Standards IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB...

Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch Industrial Ethernet Switch Network Redundancy NOTE: This function is available by request only

Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch Ordering Information IGS-9 AA B CC-DD-EE Code Definition Model Name Industrial 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-LX, single-mode, 10Km/1310nm, SC connector Industrial 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, multi-mode, 2Km/1310nm, SC connector Packing List • IGS-9164GF/FX • DIN-Rail Kit • Wall-mount Kit • Console Cable • ORing Tool CD • Quick Installation Guide Industrial 20-port managed Gigabit Ethernet switch with...