Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch Industrial Ethernet Switch Industrial 8-port managed Gigabit Ethernet switch with 8x10/100/1000Base-T(X) ▪ Supports O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy ▪ Open-Ring support the other vendor's ring technology in open architecture ▪ O-Chain allow multiple redundant network rings ▪ Supports standard IEC 62439-2 MRP*NOTE (Media Redundancy Protocol) function ▪ Supports IEEE 1588v2 clock synchronization (-NP model is not supported) ▪ Supports IPV6 new internet protocol version ▪ Supports Modbus TCP protocol ▪ Supports IEEE 802.3az Energy-Efficient Ethernet technology ▪ Provided HTTPS/SSH protocol to enhance network security ▪ Supports SMTP client ▪ Supports IP-based bandwidth management ▪ Supports application-based QoS management ▪ Supports Device Binding security function ▪ Supports DOS/DDOS auto prevention ▪ IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic ▪ Supports SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management ▪ Supports ACL, TACACS+ and 802.1x User Authentication for security ▪ Supports 9.6K Bytes Jumbo Frame ▪ Multiple notification for warning of unexpected event ▪ Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration ▪ Supports LLDP Protocol ▪ Rigid IP-30 housing design ▪ DIN-Rail and wall mounting enabled ▪ Supports backup unit device DBU-01 to quickly configuration backup/restore Introduction IGS-9080 series are managed redundant ring Ethernet switches with 8x10/100/1000Base-T(X) copper ports. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 oC to 75oC. IGS-9080 series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices for highly-managed Ethernet application. ▪ O-Ring : O-Ring is ORing's proprietary redundant ring technology, with recovery time of less 30 milliseconds and up to 250 nodes. The O-Ring r edundant ring technology can protect mission-critical application from network interruptions or temporary malfunction with its fast recover technology. *NOTE: This function is available by request

Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch ring technologies. It enables ORing's switches to form a single ring with other vendor's switch. In cases where the ring is setup using proprietary technology, ORing offers a compatibility service where ORing can make its switches compatible with your particular network requirements. ▪ O-Chain : O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy topology for any backbone Industrial Ethernet Switch ▪ Open-Ring : Open-Ring is an enhanced redundant technology that makes ORing's...

Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch Industrial Ethernet Switch Open-Vision ORing's switches are intelligent switches. Different from other traditional redundant switches, ORing provides a set of Windows utility (Open-Vision) for user to manage and monitor all of industrial Ethernet switches on the industrial network. Host Monitor Topology View

Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch Specifications ORing Switch Model *NOTE: This function is available by request only ORmg Designed for Rugged Excellence

Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch Industrial Ethernet Switch Fault Contact Code Definition Available Model