*mydirectindustry

IGAP-610H+

Product catalog summary

Introduction
The IGAP-610H+ is an industrial-grade wireless access point designed for high-speed connectivity and robust security. It supports dual-band IEEE 802.11 a/b/g/n standards and offers a maximum link speed of 300Mbps. The device is equipped with a Gigabit Ethernet port with PoE support, making it suitable for various industrial applications.

Features
- Dual-band WLAN interface with up to 300Mbps link speed.
- 12~48VDC power input and PoE support with 2KV isolation.
- Advanced security features including WEP, WPA/WPA2, and 802.1X authentication.
- Supports X-Roaming with less than 100 ms delay.
- Multiple-SSID support with VLAN and MAC filtering.
- High transmission power and throughput with HT40 2x2 MIMO.
- Configurable as AP, Client, or Repeater.
- Secured management via HTTPS and event warnings through Syslog, Email, SNMP Trap, and Relay output.
- Rigid IP-30 housing design, suitable for DIN-Rail and wall mounting.

Specifications
- Physical Ports: 1x 10/100/1000Base-T(X) with Auto MDI/MDIX.
- WLAN Interface: Supports AP/Client/Repeater modes with reverse SMA female antenna connectors.
- Frequency Bands: Supports multiple channels in both 2.4GHz and 5GHz bands for different regions.
- Transmission Rates: Up to 300Mbps for 802.11n.
- Transmit Power and Receiver Sensitivity: Detailed specifications for various modes and rates.
- Security: Supports WEP, WPA/WPA2 PSK, and 802.1X/RADIUS authentication.
- Protocol Support: Includes ARP, DHCP, DNS, HTTP, SNMP, and more.
- LED Indicators: Power, Ethernet port activity, and WLAN signal quality indicators.
- Power: Dual DC inputs with overload and reverse polarity protection.
- Environmental: Operating temperature range from -10 to 70°C and humidity from 5% to 95% non-condensing.
- Regulatory Approvals: Complies with CE, FCC, and other international standards.

Applications
The IGAP-610H+ can be used in various industrial settings to establish reliable wireless networks. It supports multiple operation modes, allowing for flexible network configurations such as AP, Client, and Repeater modes.

Ordering Information
The device is available in different models for US and EU bands, with options for high power and PoE support.

Packing List
The package includes the IGAP-610H+ device, DIN-Rail and wall mount kits, antennas, a power pigtail jack, a quick installation guide, and a terminal block.

Catalog excerpts

Industrial Wireless Access Point DIN-Rail WLAN Access Point Industrial IEEE 802.11 a/b/g/n high power wireless AP with 1x10/100/1000Base-T(X), PoE P.D Industrial Ethernet Switch Industrial Media Converter Industrial Device Server ▪ High Speed Air Connectivity: Dual Band in IEEE 802.11 a/b/g/n and b/ g/n WLAN interface selectable and support up to 300Mbps link speed ▪ 12~48VDC power input on terminal block ▪ 1 Gigabit Ethernet ports with 2KV isolation for PoE P.D. ▪ Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2PSK(TKIP,AES)/802.1X Authentication supported ▪ Support X-Roaming < 100 ms ▪ Support Multiple-SSID to 4 SSID with VLAN ▪ Support MAC Filter ▪ High transmission power (27 dBm) ▪ High throughput > 180Mbps with HT40 2x2 MIMO ▪ Support Long Distance Air Connectivity ▪ Support AP/Client/Repeater ▪ Wireless connecting status monitoring ▪ Secured Management by HTTPS ▪ Event Warning by Syslog, Email, SNMP Trap, and Relay output ▪ Rigid IP-30 housing design ▪ DIN-Rail and Wall-mount enabled Industrial Wireless Access Point Industrial Cellular VPN Router IGAP-610H+ is a reliable WLAN Access Point with 1 Ethernet Gigabit ports and IEEE 802.11 a/b/g/n wireless module. It can be configured to operate in AP/ Client/Repeater Mode. You are able to configure IGAP-610H+ by WEB interface via LAN port or WLAN interface. In addition, IGAP-610H+ also provides P.D. feature on Ethernet port which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IGAP-610H+ is one of the best communication solutions for wireless applications on the industrial network. In practical operation of the wireless access point, Windows utility (Open-Vision) is supported. This utility is very helpful for you to search and configure IP of the access point on the industrial network. In addition, the wireless access point supports various kinds of operation modes include AP/ Client/Repeater. You can build up the wireless network easily Network Management Softwar e

Open the catalog to page 1

Industrial Wireless Access Point DIN-Rail WLAN Access Point AP-Client Mode Industrial Wireless Access Point Bridge Mode Bridge Mode Repeater Repeater Mode Mode Wireless Load Balance

Open the catalog to page 2

Industrial Wireless Access Point DIN-Rail WLAN Access Point Specifications ORing AP Model ORmg Get Connected Anytime, Anywhere

Open the catalog to page 3

Industrial Wireless Access Point DIN-Rail WLAN Access Point Industrial Wireless Access Point Wireless Security

Open the catalog to page 4

Industrial Wireless Access Point DIN-Rail WLAN Access Point Ordering Information Code Definition Available Model Packing List • IGAP- 610H+ x 1 • Din-Rail Kit x 1 • Wall Mount kit x 1 • CD x 1 • 2.4GHz/5GHz Antenna x 2 • DC power Pigtail Jack • Quick Installation Guide x 1 • Terminal Block x ORmg Get Connected Anytime, Anywhere

Open the catalog to page 5

All Oring Industrial Networking Corp. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list