*mydirectindustry

BS-102FX_Series_v1.1

Product catalog summary

Introduction
The document provides technical specifications and operational details for the IBS-102FX Series, an industrial 2-port optical bypass switch designed for fiber optical networks. It ensures network integrity during power loss by switching to bypass mode.

Features

Supports 100M/1G/10G optical bypass function for duplex or simplex fiber connections.
Available in multi-mode or single-mode optical fiber models.
Low insertion loss and no extra delay in throughput.
Bypass switching time is less than 10ms.
Dual wide-range power inputs (12~48VDC) with relay output for power failure warning.
Rugged IP-30 housing design suitable for DIN-Rail or wall-mount installation.

Specifications

Physical Ports: 4 Duplex LC connectors for single-mode or multi-mode fiber.
Operating Wavelength: 1260 ~ 1570 nm for single-mode, 780 ~ 1350 nm for multi-mode.
Insert Loss: 1.6 dB for single-mode, less than 1.0 dB for multi-mode.
Power: Dual 12~48 VDC inputs, 2.7 Watts typical power consumption.
Environmental: Operating temperature from -20 to 70°C, storage temperature from -40 to 85°C, and humidity from 10% to 90% non-condensing.
Regulatory Approvals: Complies with various EMI and EMS standards, shock, free fall, and vibration tests.
MTBF: 1,246,758 hours.

Practical Operation

Normal Mode: Data is diverted from Network ports to Monitor ports.
Bypass Mode: Network data traffic is routed directly between Network ports, and Monitor data traffic is routed directly between Monitor ports.

Ordering Information

IBS-102FX-MM-LC: Multi-mode, 4xLC duplex connector.
IBS-102FX-SS-LC: Single-mode, 4xLC duplex connector.

Packing List

Includes IBS-102FX, Wall-mount Kit, DIN-Rail Kit, and Quick Installation Guide.

Optional Accessories

Various DIN-Rail power supplies and power adapters.
Fiber Patch cords.

Catalog excerpts

Industrial Ethernet Switch Optical/PoE Network Accessories > Industrial 2-port optical bypass switch for fiber optical network with 4xLC duplex Connector Support 100M/1G/10G optical bypass function of 2 port duplex or 4 port simplex fiber connection Different models supported for multi-mode or single-mode optical Throughput not affected and no extra delay Bypass switching time < 10ms Dual wide-range power inputs: 12-48VDC Relay output for power failure warning -Rail/Wall-mount installation IBS-102FX series are the external Bypass switches for 100M/1G/10G fiber optical networks. These fiber optical bypass switches protect the network from failures and subseguent maintenance by ensuring network integrity during power loss. Each of these fiber optical bypass switches includes Network ports and Monitor ports. The Network ports are used for connection to main-network connections and provide protection mechanism, and the Monitor ports are used for down-link local networking device. When the power is on, the operation mode of the Bypass switch is set to Normal, and the local networking device is connected with main-network. When power failure occurs, the Bypass switch is swiftly set to bypass mode to isolate the main-network from the local networking device. Practical Operation Normal mode: The Bypass switch diverts the data from the Network ports data to the Monitor ports. Bypass mode: The Network data traffic routed directly to the other Network port. And the Monitor data traffic routed directly to the other Monitor port. Designed for Rugged Excellence

Open the catalog to page 1