Torque Limiters V type_en
1 / 6Pages

Our Technologies Realize Your Dreams Torque limiter V type RoHS Compliant Torque limiters are also called slipping clutches, and are a mechanical component that is mainly used in the paper feed mechanisms of office equipment such as printers and photocopiers. V-type torque limiters have a structure with a coil spring press fitted onto the outer circumference surface of an inner ring that uses the friction force between the two components to limit the torque transmitted from the input side (drive side) to the output side (follower side)

Torque limiter V type Ｓ ｅ ｉ ｃ ｔ ｎ for the Ｓ ａ ｄ ｒ Models ｐ ｃ ｉ ａｉ ｓ ｆ ｏ ｔ ｎ ａｄ Nａ ｍing ａ ｄａ ｘｉｒ symbols ｎ ｕｉａｙ ｌ Collective name Nominal torque Torque limiter V type OTLV type Indicates a type of Torque limiter. Marking nominal number Unit=mm Dimension Joint prat Width Allowable rotation speed Nominal Number Note） The four squares shown above indicate a nominal torque value for the torque limiter in the unit of gf･cm. ・ ・ Three digits may be possible when a nominal torque value is 88.2mN･m(900gf･cm) or less. Torque ranges by type B and C Type Standard torque value

Torque limiter V type Ｆ ａ ｕｅ ｅ ｔｒ ｓ １． Slips in both rotating directions Used for turning in both directions（clockwise and counter-clockwise） . 2． Compact size and light weight   In the case of OTLV-6B, the outer diameter is 18mm and the weight is 7.1g, which is 18% reduction from the previous model of OTLC-6B. 3． Wide torque setting range   A standard setting torque of from 9.8 to 392 mN･m（100 to 4000gf･cm）can be supported. Please consult us if you require other torque volumes. 4． Used under the wide range of environmental conditions.   Operation condition：0℃ to +60℃, 90%RH 5． Easy to fit...

Torque limiter V type Adaptable shaft Items Specifications of the adaptable shaft OTLV6 Bore φ6 -0.01 -0.03 Outer diameter Material Ｍ ｕ ｔ ｇｔ ｅｓ ａｔ ｏ ｎｉ ｎ ｈ ｈｆ For the parallel pin, be sure to use one of the commercial item shown in the table below. Bore for OTLV Parallel pin Nominal diameter : φ ２  Length : ８ mm Parallel pin Nominal diameter : φ ２  Length : １ mm ０ Note） The above recommended pins are common for both B and C types. ・ When using the spring pin, be sure to use it in the dimensions shown below. Bore for OTLV φ6 Special Spring Pin Special Spring pin Outer dia. : φ -0.1 ２    -0.2...

Torque limiter V type Ｒ ｆｒ ｎ ｅ Ｄ ｔ ｅｅｅ ｃ ａ ａ Reliability test data OTLV6-300B Reliability test data ( at 150rpm.) OTLV6-1000B Reliability test data（at 150rpm.） 120 Torque ｍＮ ｍ ・ 0.5 1.0 1.5 2.0 2.5 Number of elapsed rotations ×106 Static torque Dynamic torque Dynamic torque OTLV8-4000C Reliability test data（at 50rpm.） 500 Torque ｍＮ ｍ ・ 0.5 1.0 1.5 2.0 2.5 Number of elapsed rotations ×106 Static torque OTLV6-4000C Reliability test data（at 50rpm.） Number of elapsed rotations ×106 Number of elapsed rotations ×106 Static torque Static torque Note） Unbalanced or extra loads are not applied to...

Torque limiter V type Sales Office 3-10-5, Akatsuki, Oyama-Shi, tochigi-Ken 329-0211, Japan Sales Dept, Component Div. Osaka Branch Office Room812, Osaka Ekimae No.4 Bldg., 1-11-4-800, Umeda, Kita-ku, Osaka 530-0001 Origin Electric Co., Ltd. Taiwan Branch Office 99F., No.110, Fuxing Rd., Taoyuan Dist, Taoyuan City 33066, Taiwan(R.O.C.) Origin Electric Co., Ltd. Kowloon Office Unit 1706-7, 17/F, Saxon Tower, 7 Cheung Shun Street, Kln, H.K. Mamada Plant 3-10-5, Akatsuki, Oyama-shi, Tochigi-ken, 329-0211, Japan Origin Electric America Co., Ltd. 3848 Carson Street Suite 216, Torrance, CA 90503,...