1. Catalogs
  2. Origin Co., Ltd.
  3. Torque Limiters P type_en

Torque Limiters P type_en

Torque Limiters P type_en

Torque Limiters P type_en

Product catalog summary
Introduction
Torque limiters, also known as slipping clutches, are mechanical components primarily used in the paper feed mechanisms of office equipment like printers and photocopiers. The "OTL-P type" torque limiters utilize a coil spring and a pressed inner ring to control torque transmission.

Features
  • Low Cost: Achieved by minimizing the number of parts to three, allowing slip operation in both directions using the spring method.
  • Compact and Lightweight: Designed with a shaft diameter of φ6, outer diameter of φ14, and weight of 2.8 gf・cm. Torque settings range from 9.8 to 49.0 mN・m.
  • High Performance: Improved torque tolerance precision, robust against environmental changes, and operational between 0°C to 60°C.

Specifications
  • Torque setting range: 9.8 to 49.0 mN・m (100 to 500 gf・cm).
  • Standard torque value: 9.81 mN・m.
  • Torque tolerance: ±15% for OTL-P6-100 to 200, ±10% for OTL-P6-300 to 500.

Reliability and Operation Environment
  • Operational temperature range: 0 to 60°C.
  • Humidity: 90% RH or less.

Mounting and Shaft Specifications
  • Use steel such as SUM, SUS, and SUJ-2 for shafts.
  • Recommended parallel pin diameter: φ2, length: 10mm.

Safety Precautions
Ensure not to exceed specified limits to avoid accidents or failures. Specifications are subject to change without notice.

Contact Information
For further inquiries, contact Origin Electric Co., Ltd. at various international offices listed in the document.
See more

Catalog excerpts

Torque Limiters P type_en-1

Our Technologies Realize Your Dreams Torque limiter P type RoHS Compliant Torque limiters are also called slipping clutches, and are a mechanical component that is mainly used in the paper feed mechanisms of office equipment such as printers and photocopiers. "OTL-P type" torque limiters have a structure with a coil spring press fitted onto the outer circumference surface of a pressed inner ring that uses the friction force between the two components to shutoff or limit the torque transmitted from the input side (drive side) to the output side (follower sid

 Open the catalog to page 1
Torque Limiters P type_en-2

Torque limiter P type Specifications for the Standard Models Component parts Torque can be generated in both directions Pressed ring Coil spring Note: One direction is also possible if desired. Setting torque value according Torque setting range (Standard models) Standard torque value Type O L T P6-□□□ (□ Torque value gf・cm) : Features 1. Low cost ・Cost reduction has been achieved by using the absolute minimum number of 3 parts. ・Offers slip operation in both directions (clockwise and counterclockwise) while using the spring method. 2. Compact size and light weight  ・Offers compact size with light...

 Open the catalog to page 2
Torque Limiters P type_en-3

Torque limiter P type Operation Environment Operation environment Recommended ranges Note) Please consult us if you use Origin products under different operation environment not specified above. ・ ・Since the operation environment described here is based on our experiences and testing data, it may not be applied to the products in same way under different circumstances. For this reason, we do not guarantee that the content of this catalogue will apply to your operation condition exactly in the same way. Please make final decision at one of your company premises before using this product. Shaft...

 Open the catalog to page 3
Torque Limiters P type_en-4

Torque limiter P type Sales Office 3-10-5, Akatsuki, Oyama-Shi, tochigi-Ken 329-0211, Japan Sales Dept, Component Div. Osaka Branch Office Room812, Osaka Ekimae No.4 Bldg., 1-11-4-800, Umeda, Kita-ku, Osaka 530-0001 Origin Electric Co., Ltd. Taiwan Branch Office 99F., No.110, Fuxing Rd., Taoyuan Dist, Taoyuan City 33066, Taiwan(R.O.C.) Origin Electric Co., Ltd. Kowloon Office Unit 1706-7, 17/F, Saxon Tower, 7 Cheung Shun Street, Kln, H.K. Mamada Plant 3-10-5, Akatsuki, Oyama-shi, Tochigi-ken, 329-0211, Japan Origin Electric America Co., Ltd. 3848 Carson Street Suite 216, Torrance, CA 90503, USA...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.