1. Catalogs
  2. Origin Co., Ltd.
  3. Torque Limiters C type_en

Torque Limiters C type_en

Torque Limiters C type_en

Torque Limiters C type_en

Product catalog summary
Introduction
The document describes the C-type torque limiter, also known as a slipping clutch, primarily used in the paper feed mechanisms of office equipment like printers and photocopiers. It features a coil spring press-fitted onto an inner ring, utilizing friction to limit torque transmission.

Specifications
  • Naming and Symbols: The torque limiter is identified by bore size and nominal torque values, with examples provided for different configurations.
  • Dimensions: Detailed dimensions are provided for various models, including bore, outside diameter, and width.
  • Torque Setting Range: Standard models have a torque setting range from 9.81 to 392 mN·m (100 to 4000 gf·cm).

Features
  • Operates in both clockwise and counter-clockwise directions.
  • Compact and lightweight design, with an outside diameter of 16mm and weight of 5g for Type A.
  • Wide torque setting range and adaptability to various environmental conditions (0°C to +60°C, 90% RH).
  • Easy installation using straight or dedicated spring pins.

Reliability
The torque control range on shipment is within ±10% of the nominal torque value. Users are advised to consult the manufacturer for applications outside specified conditions.

Operation Environment
The torque limiter is designed to operate within a temperature range of 0 to 60°C and humidity of 90% RH or less. Torque fluctuation is within ±15% of the nominal value for up to 1.0×106 rotations.

Cautions
Care must be taken during installation to avoid unbalanced loads that may affect torque. Users should not exceed specified conditions to ensure safety and performance.

Ordering Information
Customers are required to fill out a "Torque Limiter Spec Check List" when placing orders. Specifications for adaptable shafts are provided, recommending the use of specific steel products.

Safety Precautions
Users are warned against exceeding the specified limits and are advised to ensure safety by adhering to the catalog's guidelines. Specifications are subject to change without notice.

Contact Information
Contact details for various branches and offices of Origin Electric Co., Ltd. are provided for further inquiries.
See more

Catalog excerpts

Torque Limiters C type_en-1

Our Technologies Realize Your Dreams Torque limiter C type RoHS Compliant Torque limiters are also called slipping clutches, and are a mechanical component that is mainly used in the paper feed mechanisms of office equipment such as printers and photocopiers. C-type torque limiters have a structure with a coil spring press fitted onto the outer circumference surface of an inner ring that uses the friction force between the two components to limit the torque transmitted from the input side (drive side) to the output side (follower side)

 Open the catalog to page 1
Torque Limiters C type_en-2

Torque limiter C type Specifications for the Standard Models Na ming a da xir symbols n uiay l Collective name Nominal torque Torque limiter C type OTLC type Indicates shape and dimensions of torque limiter. Unit=mm Dimension Joint Section Nominal Number Allowable speed Bore Note) The four squares shown above indicate a nominal torque value for the torque limiter in the unit of gf・cm. ・ ・ Three digits may be possible when a nominal torque value is 88.2mN・m(900gf・cm) or less. Setting torque value according to type Type Standard torque value

 Open the catalog to page 2
Torque Limiters C type_en-3

Torque limiter C type F a ue e tr s 1. Slips in both rotating directions Used for turning in both directions(clockwise and counter-clockwise) A one-direction type can also be supported, . please consult us if you are planning to use it as such. 2. Compact size and light weight   Outside diameter : φ16mm, weight : 5gw for OTLC Type A. 3. Wide torque setting range   A standard setting torque of from 9.8 to 392mN・m (100 to 4000gf・cm) can be supported. Please consult us if you require other torque volumes. 4. Used under the wide range of environmental conditions.   Operation condition:0℃ to +60℃,...

 Open the catalog to page 3
Torque Limiters C type_en-4

Torque limiter C type Sales Office 3-10-5, Akatsuki, Oyama-Shi, tochigi-Ken 329-0211, Japan Sales Dept, Component Div. Osaka Branch Office Room812, Osaka Ekimae No.4 Bldg., 1-11-4-800, Umeda, Kita-ku, Osaka 530-0001 Origin Electric Co., Ltd. Taiwan Branch Office 99F., No.110, Fuxing Rd., Taoyuan Dist, Taoyuan City 33066, Taiwan(R.O.C.) Origin Electric Co., Ltd. Kowloon Office Unit 1706-7, 17/F, Saxon Tower, 7 Cheung Shun Street, Kln, H.K. Mamada Plant 3-10-5, Akatsuki, Oyama-shi, Tochigi-ken, 329-0211, Japan Origin Electric America Co., Ltd. 3848 Carson Street Suite 216, Torrance, CA 90503, USA...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.