Small Interacrive Clutches OW type_en
1 / 6Pages

Our Technologies Realize Your Dreams Small interactive clutch, OW type RoHS Compliant Vertical hold type （OSCM-OW） Small interactive clutches are a mechanical component that is able to transmit mechanical power at the same speed (1:1) without electrical power for controlling the transmission and blockage of the mechanical power like a motor, solenoid, or electromagnetic clutch. The "vertical hold type" has an internal torque limiter function, and is constructed such the limiter function (slip) activates while moving up or down. This allows for smooth motion and position hold mechanism during upward and downward motion, particularly downward motion. Furthermore, breakage of the drive array is prevented by the limiter slipping when there is excess load on the output side

Small interactive clutch, OW type Specifications for the Standard Models Mechanical power transmission from the input shaft Hold by output shaft Output shaft Input shaft Input shaft Braking load Output shaft Specified torque Specified torque Shaft hole depth （12.5） Output shaft Input shaft hole Where dimensional tolerances are not given, general tolerances should be used. Unit=mm Dimension Input shaft Nominal Number Output shaft Main body Shaft D height Shaft D height hole pitch distance diameter diameter Specification Torque Tolerable locking torque Ambient Output ※Torque Tolerated Input...

Small interactive clutch, OW type Recommended input shaft When using the interactive clutch, use an input shaft with the following specifications. Item Input shaft specifications Shaft diameter Shaft shape Reliability Type Torque control range on shipment Within ±15% of nominal torque value Within ±10% of nominal torque value Operation Environment Operation environment conditions Operation environment Note） Please consult us if you use this product in the operation environment other than above. ・ ・ Since the operation environment described here is based on our experiences and testing data,...

Small interactive clutch, OW type Reference data Reliability testing Drive motor Interactive clutch Drive motor Interactive clutch Load lowered Load raised Evaluation tester (during lowering) Evaluation tester (during raising) Load torque Operating cycle 1 cycle: Raised 2.7 revolutions → Stopped 0.5sec → Lowered 2.7 revolutions → Stopped 0.5sec Number of elapsed cycles（×104 cycle） Slip torque Braking torque Number of elapsed cycles（×104 cycle） Slip torque Braking torque Braking torque Braking torque vs temperature OSCM3-5 −10℃ to 80℃ Braking torque Braking torque vs speed OSCM3-5 50rpm to...

Small interactive clutch, OW type Cautions when press fitting gears, etc. onto the output shaft ・When press fitting gears and pulleys onto the output shaft, press fit with the housing end face on the reverse side seated properly. ・Do not hammer gears and pulleys onto the output shaft such as by using a hammer. This may cause the shaft to deform, causing internal damage to the shaft and shortening the life. ・When connecting the output shaft using a coupling, try as much as possible to keep the shaft centers aligned. If the shafts are misaligned, it will reduce the life of the product....

Small interactive clutch, OW type Sales Office 3-10-5, Akatsuki, Oyama-Shi, tochigi-Ken 329-0211, Japan Sales Dept, Component Div. Osaka Branch Office Room812, Osaka Ekimae No.4 Bldg., 1-11-4-800, Umeda, Kita-ku, Osaka 530-0001 Origin Electric Co., Ltd. Taiwan Branch Office 99F., No.110, Fuxing Rd., Taoyuan Dist, Taoyuan City 33066, Taiwan(R.O.C.) Origin Electric Co., Ltd. Kowloon Office Unit 1706-7, 17/F, Saxon Tower, 7 Cheung Shun Street, Kln, H.K. Mamada Plant 3-10-5, Akatsuki, Oyama-shi, Tochigi-ken, 329-0211, Japan Origin Electric America Co., Ltd. 3848 Carson Street Suite 216,...