Catalogs >
Oriental Motor >
Rotary Encoder

Rotary Encoder
4Pages

Catalog excerpts

Rotary Encoder · Outer diameter ϕ30 mm · High resolution (1000 P/R or 2000 P/R) Incremental Type · Voltage output, line driver output Round Shaft Type Hollow Shaft Type Small, Thin, and Lightweight High-Resolution Incremental Encoder Because these are small, thin and lightweight, with an outer diameter of ϕ30 mm, depth of 22 mm, and mass of 33 g (round shaft type) / 38 g (hollow shaft type), they can be installed in tight spaces. It is also a high resolution (1000 P/R or 2000 P/R) incremental type. Actual Position, Speed and Rotation Direction of the Mechanism can be Detected By installing a rotary encoder on a mechanism, a preventative maintenance system for that mechanism can be created. Position & Speed Rotary Encoder Host System Command Pulse ●Application Example In a belt-and-pulley mechanism, it is possible to detect the difference in rotation between the motor and mechanism due to belt deflection or breakage. Can Be Installed to Suit the Mechanism Round Shaft Type Round Shaft Type + Mounting Bracket (Sold separately) Hollow Shaft Type Aligning Mechanical Home and Z-Phase Signal Position is Easy The Z-phase signal is output at the position where the shaft flat (round shaft type) or the fixing screw (hollow shaft type) has rotated 180˚ from the encoder connector. Use this as a guide when aligning the mechanical home and the Z-phase signal position. Round Shaft Type Hollow Shaft Type 180° Rotation of Shaft Flat Encoder Connector 180° Rotation of Shaft's Fixin

Open the catalog to page 1

■Product Number #Rotary Encoder RE2 A R3J L © © © ■Product Line Round Shaft Type Hollow Shaft Type Output Shaft Type ^Connection cables must be ordered individually. ■Included Items Operating Manual ■Specifications Output Waveform #Electrical Specifications Output Type A-phase output + A-phase output - * B-phase output + Z-phase output + Z-phase output - * ❖ Line driver output only #Waveform Accuracy • Duty ratio: 50% ± 12.5% for both A-phase output and B-phase output • Z phase output: P/4 ^ L ^ 3P/4 • Phase difference: a, b, c, d = P/4 ± P/8 • Signal rise and fall times: 1 p.s max. (at...

Open the catalog to page 2

Encoder Connection Cable © Lead Wire © Product Line Applicable Encoder Type •For Line Driver Output © Dimensions (mm) • For Voltage Output ® Flexible Shielded Cable © Product Line Applicable Encoder Type

Open the catalog to page 3

Mounting Bracket (Round Shaft Type) The round shaft type rotary encoder can be installed by using the mounting bracket. Mounting Brackets Mounting Brackets ◇Product Line Assembly Example Application Example ◇Included Items Material: Aluminum Alloy Surface Treatment: Anodized Aluminum These products are manufactured at plants certified with the international standards ISO 9001 (for quality assurance) and ISO 14001 for systems of environmental management). Specifications are subject to change without notice. This catalogue was published in April 2024. ORIENTAL MOTOR (EUROPA) GmbH ORIENTAL...

Open the catalog to page 4

Rotary Encoder 4Pages

Catalog excerpts

All Oriental Motor catalogs and technical brochures

Rotary Encoder
4Pages