Catalogs >
ORIENTAL MOTOR >
Reversible Motors

Reversible Motors
22Pages

Catalog excerpts

Overview, Product Series Constant Speed Motors Single-Phase Induction Motors Constant Speed Motors Reversible Motors Three-Phase Induction Motors Reversible Motors Reversible Motors Electromagnetic Brake Motors Torque Motors Watertight, Dust-Resistant Motors Brake Pack

Open the catalog to page 1

Reversible Motors C€ • For detailed information about regulations and standards, please see the Oriental Motor website. <Additional Information> • Technical reference ^ Page H-1 • Regulations & Standards ^ Page I-2 I deal for Bi-Directional Operation Conforms to Standards Compatible with Gearheads ■Features of Reversible Motors • Ideal for Bi-Directional Operation Reversible motors have a 30 minutes rating to permit instantaneous switching of the rotational direction. A friction brake is equipped at the back of the motor, which makes reversible motors an ideal choice for applications...

Open the catalog to page 2

■K Series Features Equipped with a High-Performance Gearhead Comparison with conventional product Heat Generated ●High Permissible Torque The permissible torque is up to twice that of conventional products. Overview, Product Series ● 25 W Gearhead Output Torque (Permissible) KⅡ Series 4GV Excellent Motor Performance The magnetic balance for each input voltage has been re-examined and the motors have been specially designed to optimize their characteristics. Designing specifically for each voltage not only improves efficiency, but also contributes to equipment reliability by reducing heat...

Open the catalog to page 3

Reversible Motors■ Product Line of Reversible Motors 6 W ■System Configuration ❖ Not supplied. Peripheral Equipment (Sold separately) Programmable Controller* AC Power Supply (Main power supply) 24 VDC Power Supply (Signal)* Reversible Motor Sold Separately • The system configuration shown above is an example. Other combinations are also available. ORIENTAL MOTOR GENERAL CATALOGUE 2017/2018

Open the catalog to page 4

■Product Number • Parallel Shaft Combination Type 5 R K 40 GC T2 - 100 © © ® © © © © • Round Shaft Type 5 R K 40 A - GC T2 © © ® © © © © Overview, Product Series Constant Speed Motors Single-Phase Induction Motors ■General Specifications Three-Phase Induction Motors Electromagnetic Brake Motors Torque Motors Watertight, Dust-Resistant Motors Brake Pack Reversible Motors ❖ Heat sink size (Material: Aluminum) CAD Data Manuals www.orientalmotor.eu

Open the catalog to page 5

C-72 Reversible Motors K Series □60 mm Parallel Shaft Combination Type, Round Shaft Type ■Specifications – 30 Minutes Rating Product Name Upper Level: Parallel Shaft Combination Type Lower Level: Round Shaft Type Output Power Lead Wire Type Starting Torque Rated Torque VAC Single-Phase 220 Single-Phase 230 Single-Phase 220 Single-Phase 230 Rated Speed Capacitance μF Overheat Protection Device ●The values in the table are characteristics for the motor only. ZP: This indicates that it is impedance protected. 90 W ■Product Line Combination Type Motor and gearhead are delivered pre-assembled....

Open the catalog to page 6

■Permissible Torque • The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is max. 30% less, depending on the load. C-73 • A number indicating the gear ratio is specified where the box □ is located in the product name. CAD Data www.orientalmotor.eu Contact Manuals TEL

Open the catalog to page 7

C-74 Reversible Motors K Series □70 mm Parallel Shaft Combination Type, Round Shaft Type ■Specifications – 30 Minutes Rating Product Name Upper Level: Parallel Shaft Combination Type Lower Level: Round Shaft Type Output Power Lead Wire Type Starting Torque Rated Torque VAC Single-Phase 220 Single-Phase 230 Single-Phase 220 Single-Phase 230 Rated Speed Capacitance μF Overheat Protection Device ●The values in the table are characteristics for the motor only. TP: This indicates that there is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal...

Open the catalog to page 8

■Permissible Torque • The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is max. 30% less, depending on the load. C-75 • A number indicating the gear ratio is specified where the box □ is located in the product name. CAD Data www.orientalmotor.eu Contact Manuals TEL

Open the catalog to page 9

Reversible Motors KII Series 25 W □80 mm Parallel Shaft Combination Type, Round Shaft Type Terminal Box Type Lead Wire Type ■Specifications - 30 Minutes Rating £ £ •The values in the table are characteristics for the motor only. TP: This indicates that there is a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts automatically. Be sure to turn the power supply off before inspecting. Combination Type For...

Open the catalog to page 10

■Permissible Torque • The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is max. 30% less, depending on the load. Single-Phase Induction Motors O Round Shaft Type 4RK25A-UCT2, 4RK25A-GCT2 Mass: 1.85 kg • A code (T2) indicating the terminal box type is specified where the box ■ is located in the product name. A number indicating the gear ratio is specified where the box □ is located in the product name. CAD Data www.orientalmotor.eu Contact Manuals TEL

Open the catalog to page 11

Reversible Motors• Lead Wire Type O Parallel Shaft Combination Type ST- A-A Product Name O Round Shaft Type 4RK25A-UC, 4RK25A-GC Mass: 1.55 kg Detail Drawing of Protective Earth Terminal •A number indicating the gear ratio is specified where the box □ is located in the product name. ORIENTAL MOTOR GENERAL CATALOGUE C-78 2017/2018 Page Features C-68 / System Configuration C-70 / Connection Diagrams C-88

Open the catalog to page 12

KII Series 40 W □90 mm Parallel Shaft Combination Type, Round Shaft Type Terminal box type Lead wire type Constant Speed Motors Single-Phase Induction Motors Electromagnetic Brake Motors Torque Motors ■Specifications - 30 Minutes Rating £ £ Product Name The following items are included with each product. Motor, Capacitor, Capacitor Cap, Operating Manual • A number indicating the gear ratio is specified where the box □ is located in the product name.

Open the catalog to page 13