cad

Rack and Pinion SystemL Series - 28 Pages

Add to MyDirectIndustry favorites
Rack and Pinion SystemL Series

Catalog excerpts

Orientalmotor L Series OCstep AZ Series Equipped

 Open the catalog to page 1

The Rack and Pinion System L Series Simplifies Compact, High-Power Linear Motion. The L series is a linear actuator in which a rack and pinion mechanism and a motor have been combined. The motor is equipped with the AZ Series that utilizes a battery-free absolute sensor, which allows for high positioning accuracy and high-load transportation up to 100 kg (220 lb.). Easy to Use Linear Motion Mechanism that is "Compact" and "High Strength" The Rack and Pinion System can easily convert the motor's rotation to linear motion. The linear motion mechanism has a compact design but it can transport...

 Open the catalog to page 2

Shorter Time Between Design to Start-up The Rack and Pinion System can reduce the number of parts used, and it can also significantly reduce the time spent on design and assembly. If Parts are Purchased Separately With Rack and Pinion Systems Motor installation plate Base board Pinion gear Geared motors Rack Grommet Rack Setting in Millimeter Increments The drive motor is equipped with the AZ Series hybrid control system. By combining with the MEXE02✽ support software, the linear motion can be easily set in millimeter increments, which allows for various linear motion applications. [Minimum...

 Open the catalog to page 3

Easy Home Setting and Return-to-Home with an Absolute System Equipped with the AZ Series Hybrid Control AZ Series System Equipped with Battery-free Absolute Sensor A compact mechanical multi-turn absolute sensor (patented) has been developed. This can help improve productivity and reduce costs. Battery-free Absolute Sensor Built-in battery-free absolute sensor constantly monitors the motor's positional information without an external sensor. High Reliability with Closed Loop Control High Efficiency Technology Reduces Motor Heat Generation and Saves Energy No Home Sensor Required...

 Open the catalog to page 4

The sequence function simplifies programs (Available only on the built-in position function type) By importing output signals for controlling other equipment or external input signals such as those from sensors, the AZ Series type can simplify sequence control programs. ● No. of positioning operation data items that can be set (up to 256 points) ● No. of general-purpose I/O points (9 points for input and 6 points for output) ● No, of communication I/O points (16 points for input and 16 points for output) START Built-in controller type driver External equipment Setting th S tti the latency...

 Open the catalog to page 5

Available Drivers According to the Host System Built-in Controller Type Set the operating data in the driver, and the operating data is selected and executed from the host system. Host system connection and control is performed through I/O, Modbus (RTU), RS-485 communication, or FA network. The use of a network converter (sold separately) allows control via CC-Link communication, MECHATROLINK communication, or EtherCAT communication. ● When controlling through I/O CPU Power supply ● When controlling from computer or touchscreen ● When controlling through serial communication No positioning...

 Open the catalog to page 6

The support software enables data setting and verification of the actual drive by using a computer. Support Software (MEXE02) The support software can be downloaded from the website. Various Monitoring Functions • Operating Data and Parameter Settings Setting of operation data and parameters is easily performed via computer. Because the setting data can be saved, when the driver is replaced, the same settings can be used by transferring the saved data. I/O Monitoring The state of I/O wiring to the driver can be verified by computer. This can be used for post-wiring I/O checks or I/O checks...

 Open the catalog to page 7

Rack and Pinion Motor Driver Frame Size Electromagnetic Brake Travel Direction of Rack High-Speed Type High Transportable Mass Type Blank /Equipped High-Speed Type High Transportable Mass Type Built-in Controller Pulse Input with RS-485 Communication Pulse Input

 Open the catalog to page 8

Equipped Motor (AZ Series) with Electromagnetic Brake © Minimum Travel Amount Power Supply Input Control Power Supply 0Maximum Speed Maximum speed allowed when transporting the transportable mass. ©Transportable Mass Mass that can be moved under operating performance of the rack and pinion motor. ©Maximum Acceleration The maximum acceleration allowed when the transportable mass is transferred. ©Thrust Force from the rack that pushes the load when speed is constant. ©Push Force The pressure applied to the load during the pushing operation. ©Holding Force Holding force when the motor is...

 Open the catalog to page 9

■System Configuration ●Combination of L Series with Electromagnetic Brake and either Built-in Controller Type Driver or Pulse Input Type Driver with RS-485 Communication This is an example of a configuration using I/O control or RS-485 communication in a built-in controller type driver. Rack and pinion motors, drivers, and connection cable sets/flexible connection cable sets need to be ordered separately. 24 VDC Power Supplies for Control/Electromagnetic Brake✽1 L Series Rack and Pinion Motor Connection Cable Sets/Flexible Connection Cable Sets Max. Extension Length: 20 m For...

 Open the catalog to page 10

• Combination of L Series with Electromagnetic Brake and Pulse Input Type Driver This is an example of a single-axis system configuration using a programmable controller (with pulse generating function). Rack and pinion motors, drivers, and connection cable sets/flexible connection cable sets need to be ordered separately. 24 VDC Power Supplies for Control/Electromagnetic Brake* Rack and Pinion Motor Connection Cable Sets/Flexible Connection Cable Sets □ □ □ ^Connection Cable Sets ^Flexible Connection Cable Sets Programmable Controller* AC Power Supply (Main Power Supply) For Motor For...

 Open the catalog to page 11

■ Product Number Code • Rack and Pinion Motors LM4F 500 AZMC-1 © © ® © © © © ®

 Open the catalog to page 12

■ Product Line • Rack and Pinion Motors O High-Speed Type Frame Size • Either F (vertical to the mounting foot surface) or B (horizontal to the mounting foot surface) indicating the rack moving direction is entered where the box □ is located within the product name. • Either F (vertical to the mounting foot surface) or B (horizontal to the mounting foot surface) indicating the rack moving direction is entered where the box □ is located within the product name.

 Open the catalog to page 13

All ORIENTAL MOTOR catalogs and technical brochures

  1. Servo Motors

    7 Pages

  2. DSC Series

    76 Pages

  3. BLH Series

    36 Pages

  4. DSC Series

    11 Pages

  5. BXII Series

    31 Pages

  6. RKII Series

    51 Pages

  7. AZ Series

    10 Pages

  8. CVK Series

    24 Pages

  9. Stepper Motors

    33 Pages

  10. Servo motors

    9 Pages

  11. KII Series

    16 Pages

  12. RK Series

    4 Pages

  13. AS Series

    4 Pages

  14. AR Series

    4 Pages