Group: Oriental Motor
Catalog excerpts
Oriental motor Equipped with a High-Performance Gearhead
Open the catalog to page 1Our New Standard in Geared AC Motors, the K Series. Oriental Motor, which has set the standard for AC motors, listened and has sought out the next generation in AC motors. The K Series offers higher strength gears that maximizes motor performance with ease of use wiring and mounting, all at affordable prices. These are the characteristics of the new standard in AC motors, the next generation K Series.
Open the catalog to page 2The new K Series AC motors, equipped with the highest strength gearheads are now available at affordable prices. The Strength Has Changed. The gear strength has increased in order to maximize the performance of the motor. High Permissible Torque The maximum permissible torque has doubled compared to conventional products thanks to increased gear strength✽ which provides a torque range that exceeds anything previously offered. Down sizing is also possible by switching the motors used in the past to the K Series. If a small motor is selected, power consumption can be suppressed and costs can...
Open the catalog to page 3The Performance Has Changed. Gear strength, performance and user-friendliness has increased. Long Life The rated life has doubled compared to conventional products The gearhead ball bearing diameter has increased, resulting in ● Comparison of Rated Life Oriental Motor's Conventional Product doubling the life of the gearhead (10,000 hours compared to the Rated Life: rated life of 5,000 hours of conventional gearheads). Performing maintenance has decreased as a result of the longer life. Rated Life: Please visit the following link for Oriental Motor's denition....
Open the catalog to page 4■ Terminal Box Type The cable outlet can be changed to three different directions. This can be changed to suit the installation requirements. Terminal Box Fixed position when shipped ✽ Excluding installation surface Peripheral Equipment (Sold separately) Combination Type (Motor/Gearhead) Brake Pack SB50W AC Power Supply (Main power supply) Capacitor Cap (Included) Capacitor (Included) Accessories (Sold separately) Mounting Brackets Flexible Couplings ●Example of System Configuration Sold Separately K Series Combination Type Brake Pack Mounting Bracket Flexible Coupling ●The system...
Open the catalog to page 5Output Power 6 W (1/125 HP) 15 W (1/50 HP) 25 W (1/30 HP) 40 W (1/19 HP) 60 W (1/12 HP) 90 W (1/8 HP) Single-Phase 110/115 ● ● ● ● ● ● Single-Phase 220/230 ● ● ● ● ● ● Product Line Induction Motor ■ Product Number ◇ Combination Type 2: 60 mm (2.36 in.) 3: 70 mm (2.76 in.) 4: 80 mm (3.15 in.) 5: 90 mm (3.54 in.) I: Induction Motor K: K Series (Example) 25: 25 W (1/30 HP) UA: Single-Phase 110/115 VAC UC: Single-Phase 220/230 VAC Motor Frame Size Motor Type Series Output Power (W) Power Supply Voltage T: Terminal Box Type Gear Ratio A: Imperial ◇ Pinion Shaft Motor 2: 60 mm (2.36 in.) 3: 70 mm...
Open the catalog to page 6■ General Specifications ● Induction Motor Item Insulation Resistance Specification 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity. Dielectric Strength Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity. Temperature Rise Thermal Class Temperature rise of windings are 80˚C (176˚F) or less measured by the resistance change method after rated operation under normal ambient...
Open the catalog to page 7Induction Motors ■ Product Line and List Price ● Lead Wire Type Output Power ● Terminal Box Type Product Name 2IK6UA-□A The following items are included with each product. Motor, Gearhead, Capacitor, Capacitor Cap, Installation Screws, Parallel Key, Operating Manual ● Enter the gear ratio in the box (□) within the product name. Output Power Product Name
Open the catalog to page 8■ Specifications ● Induction Motors – Continuous Rating Product Name and Type Lead Wire Type Terminal Box Type Voltage VAC Single-Phase 110 Single-Phase 115 Single-Phase 220 Single-Phase 230 Single-Phase 110 Single-Phase 115 Single-Phase 220 Single-Phase 230 Single-Phase 110 Single-Phase 115 Single-Phase 220 Single-Phase 230 Single-Phase 110 Single-Phase 115 Single-Phase 220 Single-Phase 230 Single-Phase 110 Single-Phase 115 Single-Phase 220 Single-Phase 230 Single-Phase 110 Single-Phase 115 Single-Phase 220 Single-Phase 230 : These products are impedance protected. : This indicates that...
Open the catalog to page 9■ Permissible Torque ● Induction Motors Product Name Combination Type Speed r/min Gear Ratio ● Enter the gear ratio in the box (□) within the product name. colored background indicates gear shaft rotation in the same direction as the motor shaft. Others rotate in the opposite direction. ●A ● The speed is calculated by dividing the motor's synchronous speed (60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2 to 20% less than the displayed value, depending on the load.
Open the catalog to page 10■ Dimensions Unit = mm (in.) ● Mounting screws are included. ● 6 W (1/125 HP) ◇ Motor/Gearhead (Lead Wire Type) ◇ Key and Key Slot (The key is included with the gearhead) Mass: 1.2 kg (2.6 lb.) (Including gearhead) Gearhead Product Name Motor Product Name Product Name Protective Earth Terminal M4 5 (0.20) max. 21.5(0.85 ) Motor Leads 300 mm (12 in. ) Length UL Style 3271, AWG20 Protective Earth Terminal M4 Detail Drawing of Protective Earth Terminal ● 15 W (1/50 HP) ◇ Key and Key Slot (The key is included with the gearhead) Mass: 1.7 kg (3.7 lb.) (Including gearhead) Gearhead Product Name...
Open the catalog to page 11● 25 W (1/30 HP) ◇ Motor/Gearhead (Terminal Box Type) ◇ Key and Key Slot (The key is included with the gearhead) Mass: 2.65 kg (5.8 lb.) (Including gearhead) Gearhead Product Name Motor Product Name Product Name ● Use cable with a diameter of ϕ6∼ϕ12 mm (ϕ0.24∼ϕ0.47 in.). ● 40 W (1/19 HP) ◇ Key and Key Slot (The key is included with the gearhead) Mass: 4.0 kg (8.8 lb.) (Including gearhead) 0 5 (0.20) max. Motor Leads 300 mm (12 in. ) Length UL Style 3271, AWG20 Protective Earth Terminal M4 Gearhead Product Name Motor Product Name Product Name ◇ Motor/Gearhead (Lead Wire Type) 21.5 (0.85)...
Open the catalog to page 12All ORIENTAL MOTOR catalogs and technical brochures
-
Product Guide
36 Pages
-
Product Guide
36 Pages
-
Linear & Rotary Actuators
11 Pages
-
Rack and Pinion System L Series
28 Pages
-
DRS series
2 Pages
-
DGII
2 Pages
-
EH series
12 Pages
-
Servo Motors
7 Pages
-
DSC Series
76 Pages
-
Motors Torque
6 Pages
-
BLH Series
36 Pages
-
Electric CylindersEAC Series
2 Pages
-
DSC Series
11 Pages
-
Overview of Standard AC Motors
21 Pages
-
BLE2 Series Brushless DC Motors
18 Pages
-
BMU Series Brushless DC Motors
18 Pages
-
Catalog Overview
24 Pages
-
BXII Series
31 Pages
-
RKII Series
51 Pages
-
AZ Series
10 Pages
-
CVK Series
24 Pages
-
Stepper Motors
33 Pages
-
Universal Controller, SCX11
4 Pages
-
Standard AC Motors
9 Pages
-
Servo motors
9 Pages
-
Stepping Motors
23 Pages
-
Cooling Module
8 Pages
-
LS Rack and Pinion Systems
1 Pages
-
RK Series
4 Pages
-
AS Series
4 Pages
-
AR Series
4 Pages
-
Controllers for Stepping Motors
18 Pages
-
AC Motor Systems
62 Pages
-
VEXTA Brushless DC Motors
60 Pages
-
AC Motor Accessories
16 Pages
-
Clutch & Brake Motors
8 Pages
-
Electromagnetic Brake Motors
44 Pages
-
Reversible Motors
36 Pages
-
Induction Motors
54 Pages