ES02
22Pages

Catalog excerpts

Speed Controller ●Connection Information● Technical reference ➜ Page G-1 Safety standards ➜ Page H-2 ES02 is a speed controller designed for ultimate ease of use when operating and wiring, focusing on the functions required for speed control. A wide range of speed control motors from the V Series and the World K Series are available for use with this controller. ● For detailed product safety standard information including standards, file number and certification body, please visit www.orientalmotor.eu. ● Controlling 6 W to 90 W with a Single Unit ●Speed control One ES02 unit is all you need to operate speed control motors with varying output of 6 W to 90 W. 90 to 1400 r/min (50 Hz) 90 to 1600 r/min (60 Hz) ●Instantaneous Stop ●Acceleration (ACCEL) and deceleration (DECEL) operation provide the functions necessary for operating speed control. ● Simple Wiring For easy wiring the new design provides separate connection terminals for power-supply cables and control-signal lines. Terminals for Control-Signal Lines ● Can be Used World-Wide These products support the power supply voltages used in many countries around the world. It is recognized by UL and CSA standards, and it has the CE Marking under the EMC Directive and Low Voltage Directive. ● IP20-Compliant The case which is designed with measures for protection against electric shock and conforms to IP20 for the degree of protection. It uses a design which prevents the operator from touching the terminal block, thereby ensuring a high degree of safety. ● Conforms to DIN rail The plate enables easy installation and detachment to and from the DIN rail. Connection Terminals for Power-Supply Cables ■ Product Line ● Speed Controller For the single-phase 100-115 VAC model, please contact the nearest Oriental Motor sales office. Product Name ES01 ES02 Power Supply Voltage Single-Phase 100-115 VAC Single-Phase 200-230 VAC The following items are included in each product. Speed Controller, External Speed Potentiometer, Operating Manual ■ Specifications of Speed Controller ES02 Single-Phase 200-230 VAC ±10% 50/60 Hz V Series: 6 W, 15 W, 25 W, 40 W, 60 W, 90 W World K Series: 6 W, 15 W, 25 W, 40 W, 60 W 50 Hz: 90∼1400 r/min 60 Hz: 90∼1600 r/min Speed Control, Instantaneous Stop, Acceleration/Deceleration The measured value is 100 MΩ min. when a 500 VDC megger is applied between the case and all the pins and the FG terminal and the AC input terminals Insulation Resistance under normal ambient temperature and humidity. No abnormality is judged even with application of 1.5 kVAC at 50 Hz or 60 Hz between the FG terminals and the AC input terminals for 1 minute after rated Dielectric Strength operation under normal ambient temperature and humidity. No abnormality is judged even with application of 3.0 kVAC at 50 Hz or 60 Hz between all the pins and the case for 1 minute. Operating Ambient Temperature 0∼+40˚C (non-freezing) Operating Ambient Humidity 85% max. (non-condensing) Degree of Protection IP20 (with cover) Speed Controller Product Name Power Supply Voltage Power Supply Frequency Applicable Speed Control Motor Output Power Variable Speed Range Functions Note ● Multi-motor Control cannot be used. ● When instantaneous stop is activated, a large braking current will flow to the motor. Braking current ➜ Page D-130 ■Connection and Operation ➜ Page ORIENTAL MOTOR GENERAL CATALOGUE 2012/2013 Features D-110 / System Configuration D-111 / Product Line D-112 / Specifications D-115 / Characteristics D-120 Dimensions D-121 / Connection and Operation D-128 / Motor and Gearhead Combinations D-131

Open the catalog to page 1

Speed Control Motors Introduction ■ System Configuration Gearheads and Linear Heads (Sold separately) Parallel Shaft Gearheads (➜ Page D-95) Right-Angle Gearheads (➜ Page C-213) Solid Shaft Type World K Series Reversible Motor AC Power Supply (Main power supply) External Speed Potentiometer (Included with the speed controller) Capacitor (Included with the motor) Accessories (Sold separately) AC Speed Control Motors Capacitor Cap (Included with the motor) Brushless Motors Speed Control Motor (Sold separately) Hollow Shaft Type Linear Heads (➜ Page E-178) ① CR Circuit for Surge Suppression ②...

Open the catalog to page 2

AC Speed Control Motors/ES02 ■ Product Number Code ● V Series Speed Control Motor ◇ Motor (Combination type, pinion shaft type) ① Series Name ② Speed Control Motor Motor Type ③ ④ Motor Frame Size ⑤ Output Power (W) Power Supply Voltage ⑥ Motor Shaft Type, Gear Ratio I: Induction Motor R: Reversible Motor 2: 60 mm 3: 70 mm 4: 80 mm 5: 90 mm (Example) 25: 25 W A2, A: Single-Phase 100 VAC, 110/115 VAC C2, C: Single-Phase 200 VAC, 220/230 VAC Number: Gear Ratio (Combination Type) GV: GV Type Pinion Shaft GVH: GVH Type Pinion Shaft GVR: GVR Type Pinion Shaft J: For Single-Phase 100 VAC and 200...

Open the catalog to page 3

Speed Control Motors Type Power Supply Voltage Applicable Controller (Sold separately) Applicable Controller (Sold separately) ◇ Pinion Shaft Type Motor/Gearhead (40 W to 90 W) Type Power Supply Voltage The following items are included in each product. ●Gearhead Gearhead, Mounting Screws, Parallel Key, Operating Manual The following items are included in each product. ●Pinion Shaft Type Motor, Capacitor, Capacitor Cap, Operating Manual AC Speed Control Motors ● Motor specifications, motor dimensions and gearhead dimensions are the same as those of the combination type. The following items...

Open the catalog to page 4

AC Speed Control Motors/ES02 ■ Product Line ● World K Series Speed Control Motor For the single-phase 100 VAC, the single-phase 110/115 VAC, the single-phase 200 VAC models, please contact the nearest Oriental Motor sales office. ◇ Pinion Shaft Type (6 W to 60 W) Type Power Supply Voltage Product Name Product Name Product Name Product Name Product Name Reversible Motors Induction Motors Applicable Controller (Sold separately) The following items are included in each product. Motor, Capacitor, Capacitor Cap, Operating Manual ● Parallel Shaft Gearhead (Sold separately) ◇ Long Life, Low Noise...

Open the catalog to page 5