Driver for 2-Phase/5-Phase Stepper Motors Multi-Axis Type EtherCAT Compatible · This compact, lightweight 4-axis control driver reduces wiring and saves valuable space. · Can be used with 2-phase/5-phase stepper motors and electric actuators · EtherCAT communication enables synchronous operation · Automatically controls electromagnetic brakes using data acquired from integrated encoders Can reduce host controller costs and program creation time Without Mounting Plate Product name: CVD4A-KED Right-Angle Type without Mounting Plate Product Name: CVD4AR-KED EtherCAT Compatible/4-Axis Control Reduces Wiring and Saves Space · I/O signals are consolidated into a single EtherCAT communication cable. Wiring for communication, power supply, etc. for 4-axis are integrated into a single driver · Reduces work hours for wiring and decreases problems from mis-wiring · Integrated management of device information including motor information by using an EtherCAT master CVD Series Multi-Axis Type Driver Host Control Device ● Daisy-chain connection of multi-axis drivers is possible Main Device (Also supports IPC) EtherCAT Cable EtherCAT Cable EtherCAT Cable ● The right-angle connector direction type can be installed with several units placed side by side, eliminating crowded wiring and saving space. ● Driver connector positions are concentrated on two sides. This simplifies wire

Combined Use of 2-Phase/5-Phase Motors and Synchronous Control is Possible Using EtherCAT Communication ●A single driver can control 2-phase/5-phase motors and actuators, which reduces parts inventory and management costs ●Synchronous control is possible while utilizing the different characteristics of 2-phase/5-phase motors via EtherCAT communication Host Control Device 5-Phase Motors Lower vibration and higher precision positioning 2-Phase Motors Short positioning time over short distances by utilizing high torque characteristics Encoder Acquisition of encoder information allows for position...

List of Combinations with the CVD Multi Axis Drivers · 4 motors with input current of 0.5 to 3.0 A✽ (per axis) can be connected. (Max. 12 A per 1 driver) · Can be combined with vacuum motors , but must check combination conditions, etc. Please contact Oriental Motor for details. ✽Varies depending on the combined product. Product Line PKP Series Bipolar 4 Lead Wires PKP Series 5-Phase Stepper Motors PK Series Rated Current [A/Phase] Hollow Rotary Actuator Compact Electric Cylinders ✽1 Some product names are listed here. Can be combined with products containing the product names listed here. Note...

Acquire Encoder Information and Position Deviation Detection Driver includes a function to acquire encoder information. Position deviation can be detected by the driver and outputs a signal without the need for a host controller. The actual position and speed of the motor can also be monitored on a computer screen by using the support software MEXE02. · No high-speed counter needed, reducing host controller costs · Outputs signal to the host controller using EtherCAT communication. Reduces program creation time. ● CVD Series Multi-Axis Type Power Supply ● Conventional Product Power Supply High-Speed...

Automatic Control of Electromagnetic Brake and Power Supply · No electromagnetic brake control circuit is needed, which reduces program creation time · Reduced wiring work time ● CVD Series Multi-Axis Type Control Power Supply/ Control Circuit for Electromagnetic Brake Not Required ● Conventional Product Power Supply for Electromagnetic Brake Power Supply Power Supply for Motor Control Circuit for Electromagnetic Brake Cable for Electromagnetic Brake Cable for Electromagnetic Brake Cable for Electromagnetic Brake Cable for Electromagnetic Brake Can Provide Power to Sensors ● CVD Series Multi-Axis...

Support from Startup to Maintenance with the Support Software MEXE02 In addition to setting and editing the operating data and various parameters, teaching and monitoring various operating conditions can be performed using the support software MEXE02. Various functions that are useful during wiring checks and test operation are available. ● Parameter setting ● Status monitor for all axes ● PDO monitor ● Remote operation Functions to help adjust motor operation after the equipment is installed are available. ● Waveform monitor · Velocity demand value of motors, etc. can be monitored like an oscilloscope...

■ Communication Specifications Main Power . ... .. Supply InputVoltage ❖Varies depending on the combined product. Communication Protocol ■ Dimensions (Unit = mm) # Without Mounting Plate Right-Angle Type without Mounting Plate ■ Motor Connection Cable - Driver side Specifications are subject to change without notice. This catalogue was published in April 2025. Customer Service Center (German & English) These products are manufactured at plants certified with the international standards ISO 9001 (for quality assurance) and ISO 14001 (for systems of environmental management). © Copyright Oriental...