High Torque Gearheads Parallel Shaft Gearhead Foot Mount Type Gearhead Right-Angle Hollow Shaft Hypoid JH Gearhead Foot Mount Type JB Gearhead Parallel Shaft JV Gearhead Right-Angle Hollow Shaft Hypoid Gearhead These gearheads are designed for our compact motors of BMU and BLE2 series. They are specified with high torque and big axial and radial loads. Right-Angle Hollow Shaft Hypoid JH Gearhead ■Permissible Torque ■High Strength No torque saturation over the entire speed range. The degree of protection is IP66 which is realized by the stainless steel shaft (JH and JV gearhead). Compared to conventional gearheads 2x more Permissible Radial Load 981 N ●Stainless Steel Shaft Permissible Axial Load 261 N Gear Ratio JH gearhead conventional parallel shaft type JB gearhead (steel shaft): IP44 Foot Mount Type JB Gearhead • Parallel Shaft JV Gearhead ■High Permissible Torque Up to 259 Nm 600 ■High Strength Foot Mount Type Parallel Shaft with Foot Mount Type ■High Gear Ratio Flange Type Permissible Radial Load Permissible Radial Load Permissible Axial Load Permissible Axial Load Foot Mount Type JB Gearhead Gear Ratio Permissible radial load Permissible axial load [1/450 by 3000 r/min] Permissible radial load Permissible axial load

■Features of Right-Angle Hollow Shaft Hypoid Gearhead ●Downsizing ●Lower Cost Downsizes the construction by direct mounting to the conveyor. Furthermore, the concentric shaft offers more flexibility for the mounting direction. Reduction of costs and parts thanks to direct connection. Concentric Shaft Shape ● Reduction of costs ● Reduction of parts ● Reduction of coupling space Right-Angle Hollow Shaft Hypoid Gearhead Reduction of coupling space Parts reduction 90 W AC Motor Parallel Shaft Gearhead [Right-Angle Hollow Shaft Hypoid Gearhead] [Parallel Shaft Gearhead] ■Features of Foot Mount Gearhead...

■System Configuration ● Motors, drivers and connection cables are sold separately. Data Setting Software Connection Cable Right-Angle Hollow Shaft Hypoid JH Gearhead AC Power Supply (Main power supply) Pull-out on output shaft side Programmable Controller✽1 AC Power Supply (Main power supply) Pull-out on rear of the motor Accessories (Sold separately) DIN Rail Mounting Brackets ✽4 ➜ Page 19 External Speed Potentiometer ✽2✽4 ➜ Page 19 Driver Mounting Brackets ✽3✽5 ➜ Page 19 Watertight, DustResistant Front Cover ✽3✽5 ➜ Page 19 General-Purpose Cables for I/O Signals ✽2 ➜ Page 19 Power Supply Cable...

#Motor (Combination Type/Round Shaft Type) O Right-Angle Hollow Shaft Hypoid JH Geared / Foot Mount Type JB Geared / Parallel Shaft JV Geared BLM 5 200 H P K - 5 C B 50 B -L © © © ©@© ®®®®©@ Motor Product Code Gearhead Product Code © #Driver BLE2D 120 - C © © ® BMUD 120 - C 2 © © ® © #Conneotion Cable CC 010 H BL F © © © © ©

Motors, drivers and connection cables must be ordered individually. For the single-phase 100-120 VAC models, please contact the nearest Oriental Motor sales office. ©Motors O Right-Angle Hollow Shaft Hypoid JH Geared Output Power Output Power OBMU Series O Foot Mount Type JB Geared Output Power Output Power ©Connection Cables Length located within the product name. ■ F or B indicating the direction of cable outlet is entered where the box ■ is O Parallel Shaft JV Geared Two types of the connection cables with different drawing directions are available F: Cable drawn by the output shaft side B:...

Right-Angle HoIIow Shaft Hypoid JH Geared 60W, 120W ❖ 1 Only for BLE2 series driver; The brackets ( ) indicate specification for analog setting. ❖ 2 For BMU series, the Conditions Operating ambient temperature is 0 - +40oC ■The values correspond to each specification and characteristic of a stand-alone motor. ❖ 1 The rotation direction is viewed from the gear flange side (see illustration on the right). ❖ 2 The speed of the output shaft is the value of the speed divided by the gear ratio. ❖ 3 The permissible radial load can also be calculated with a formula. ^ Page 18 ❖4 It is also applicable...

■Speed – Torque Characteristics Continuous Duty Region: Continuous operation is possible in this region. Limited Duty Region: This region is used primarily when accelerating Maximum Instantaneous Torque Rated Torque Continuous Duty Region 80 Limited Duty Region Rated Torque Maximum Instantaneous Torque Limited Duty Region Torque [Nm] Maximum Instantaneous Torque Rated Torque Limited Duty Region Continuous Duty Region Continuous Duty Region 3000 ●The values correspond to each specification and characteristic of a motor without gearhead. The speed-torque characteristics show the values when rated...

Right-Angle Hollow Shaft Hypoid JH Geared 200 w, 300 w■Specifications c^lus C€ ❖ 1 The rotation direction is viewed from the gear flange side (see illustration on the right). ❖ 2 The speed of the output shaft is the value of the speed divided by the gear ratio. ❖ 3 The permissible radial load can also be calculated with a formula. ^ Page 18 ❖ 4 It is also applicable when digitally setting the deceleration time to below 0.1 seconds. ■Speed - Torque Characteristics Continuous Duty Region; Continuous operation is possible in this region. Limited Duty Region; This region is used primarily when accelerating....

Foot Mount Type JB Geared 200 w, 300 w■Specifications c^ius CC Product Name ❖1 Only for BLE2 series driver; The brackets ( ) indicate specification for analog setting. ❖2 For BMU series, the Conditions Operating ambient temperature is 0 - +40oC ■The values correspond to each specification and characteristic of a stand-alone motor. ❖ 1 The speed of the output shaft is the value of the speed divided by the gear ratio. ❖2 It is also applicable when digitally setting the deceleration time to below 0.1 seconds. ^ Load Position ■Speed - Torque Characteristics Continuous Duty Region; Continuous operation...

Parallel Shaft JV Geared 200 w, 300 w■Specifications c^lus C€ Gear Ratio ❖ 1 The speed of the output shaft is the value of the speed divided by the gear ratio. ❖ 2 It is also applicable when digitally setting the deceleration time to below 0.1 seconds. ❖ 3 300 W Type only O Load Position Product Name ❖ 1 Only for BLE2 series driver; The brackets ( ) indicate specification for analog setting. ❖ 2 For BMU series, the Conditions Operating ambient temperature is 0 - +40oC ■The values correspond to each specification and characteristic of a stand-alone motor. ■The values correspond to each specification...