Brushless Motors All New. An advanced Brushless DC package, which is both easy to use and feature rich.

Evolution in Brushless Motors Introducing the BLE2 Series BLE Series models have been fully revamped. The motor, driver, and cable have been redesigned. While retaining the original advantages of the brushless DC motors. This makes the BLE2 Series easy to use and highly functional. This advanced model reveals its excellence with every application. NexBL is the new brushless motor from Oriental Motor. All of the structures have been updated, with a focus on maximizing the performance demanded of a motor. A combination of unprecedented compactness, high power, and high efficiency has been realized....

Superb Performance and Features Easy to Use and Affordable Prices ● Speed Control Range 80∼4000 r/min ● The Driver can be Digitally Set and Controlled via the Drivers Front Panel. ● Speed Regulation Rate ±0.2% ✽In digital setting ● Compact and Thin Drivers Allows for Side-by-Side Installation ● Torque Limiting Capability ● Multiple Speed-Change Operation Max. 16 Speeds ● Output Shaft Holding when Stopped (up to 50% of rated torque) ● Watertight and Dust-Resistant (degree of protection IP66) ✽Only for motor ● High Rust-Proof and Anti-Corrosion Properties due to Stainless Steel Shaft ● Speed Setting...

In Pursuit of Easy Setting, Installation, and Wiring Overhauling the motor structure has made it even more compact, as well as increasing the power and efficiency. The driver comes with a digital indication panel, that easily allows speed to be set via a single potentiometer. Additionally, connection cables now come with the option to choose the pull-out direction and a max. distance of 20 m can be secured via direct connection. BLE2 Series epitomises what the customers find easy to use. The Control Panel allows for easy setting. A control panel is installed on the front face of the drive. Operating...

Watertight and Dust-Resistant Performance (Degree of protection IP66) A new type of connector has been designed, which includes a built-in Gasket and O-ring. This allows for the motor to achieve an IP66 degree of protection in both the motor and connector, enabling it to be used in an environment where high pressured water may be an issue. Additionally the connectors lock lever does not require a screw fitting, which allows for easy connection.  ✽The driver portion is IP20. ● Connector Gasket Lock lever O-ring Standardized Use of Stainless Steel Shaft EURONORM X 10 CrNiS 18 9 stainless steel...

|Operating Method • Local Control Operating: Set via the front control panel. It can be used for test operation. • Remote Control Operation: Set via external signals and data setting software MEXE02. The 4 Data Setting Methods ❖When using data setting software commercially available USB cable connect the driver and PC. | Settable Contents Setting Contents

| Use ful Functions that Utilize Data Setting Software MEXE02Monitoring Function A variety of monitoring functions are built into the driver that helps with confirming the operating status of the motor, etc. By using these during application set-up, equipment can be configured and adjusted more quickly as well as making maintenance much more efficient. • Waveform Monitoring • Alarm Monitoring When Operating For Maintenance The operating and output signal status of the motor can be monitored like an oscilloscope. This can be used for application set-up & configuration. When an alarm occurs the...

Compact, High Power, and High Efficiency Motors ● Uses the New Brushless Motor NexBL. in Unit Efficiency by Up to 7% (Compared against the BLE Series) Optimal magnetic design and high-performance materials allow for a stator thickness of only 11.2 mm. It is a high-efficiency power unit that can output 120 W with this thickness. Series Name Optimization of Magnetic Design Motor Weight Speed Control Range [Rotor] · High-Performance Magnets are Used [Stator Lamination] · A High-Performance Magnetic Steel Sheet is Used · Thickness 11.2 mm (50% less compared to conventional products) Permissible Torque...

■System Configuration $Motors, drivers and connection cables are sold separately. Data Setting Software Connection Cable Programmable Controller✽1 Motor (Combination type with a parallel shaft) AC Power Supply (Main power supply) Pull-out on output shaft side Pull-out on rear of the motor Vertical Pull-out Accessories (Sold separately) Flexible Couplings ( ➜ Page 29) Mounting Bracket for Motor and Gearhead✽2 ( ➜ Page 29) Motor Cover ( ➜ Page 30) DIN Rail Mounting Bracket ( ➜ Page 29) External Speed Potentiometers✽3 ( ➜ Page 29) General-Purpose Cables for I/O Signals✽3 ( ➜ Page 28) Power Supply...

■ Product Number • Motor BLM 6 200 S H P - GFV ©©©©©© © ❖WARNING: Connecting the BLE2 to three-phase 400 VAC will damage the product.

Please purchase a motor, a driver, and a connection cable. • Motor ^Pinion Shaft type ^Round Shaft type Output Power Output Power • Gearheads ^Parallel Shaft Gearheads Drivers Output Power Output Power Connection Cables 3 types of connection cables with different cable pull-out direction are available. F: Pull-out on output shaft B: Pull-out on rear of the V: Vertical Pull-out

❖ The value inside parentheses is the specification for analog setting. • The values correspond to each specification and characteristics of a stand-alone motor. • A number indicating the gear ratio is specified where the box □ is located in the product name.

Motor / Gearhead Round Shaft Type Driver Rated Output Power (Continuous) Rated Voltage Permissible Voltage Range Frequency Power Supply Input Permissible Frequency Range Rated Input Current Max. Input Current Rated Speed Speed Control Range Load Speed Regulation✽ Voltage Temperature BLM6300SHP-GFV / GFV6G □S BLM5300HP-AS BLE2D300-C 300 Single-Phase 200-240 / Three-Phase 200-240 −15 - +10% 50 / 60 ±5% Single-Phase: 3.2 / Three-Phase: 1.8 Single-Phase: 8.5 / Three-Phase: 6.0 3000 80 - 4000 r/min (Speed ratio 1:50) ±0.2% (±0.5%): Conditions 0 - rated torque, rated speed, rated voltage, normal ambient...