Catalogs >
ORIENTAL MOTOR >
BLH Series

BLH Series
36Pages

Catalog excerpts

Brushless Motors BLH Series Improved DC Input drivers with more functionality and performance

Excellent performance just as-is. The DC input type brushless motor BLH Series has been updated. Performance has been increased, while the motor and driver remain the same size. Using the support software with the digital setting type allows a variety of useful functions to be utilized.

Open the catalog to page 2

The BLH Series has been updated with a variety of new Features. ● High torque at high speeds ● Set operating data from your computer✽ ● Speed range 80 to 3000 r/min✽ ● Monitor operating status in real time✽ ● Deceleration stop according to the set time✽ ● Torque adjustment✽ ● Max. 8 data setting points✽ (conventional product: 2 points) ● Quieter: 13 dB quieter than before ✽ When using the MEXE02 support software and digital setting type driver. 2 Driver Types to Choose From Common motor ■ Analog Setting Type ●Installation and functional compatibility with current products $112∼ ●Increased...

Open the catalog to page 3

Increased performance and value with new drivers. Reduction in Equipment Tact Time Reduction in tact time Reduced Starting Time Updated Product Conventional Product ●Faster starting time with increased torque Reduced Stopping Time ●Stop at the set time with deceleration stop (digital setting type) Max. Instantaneous Torque (1.5× the rated torque) Limited Duty Region Max. instantaneous torque: 1.5× the rated speeds and a greater instantaneous region A greater continuous duty region for higher Updated Product Conventional Product Increased Torque Rated Torque Deceleration Stop (digital...

Open the catalog to page 4

Startup and maintenance with digital settings + support sotware. Equipment Startup Assistance Teaching and Remote Operation Operating Data Copy Reading Master Reading Support software MEXE02 Operating data can be set on the computer screen. It is possible to perform a test run without connecting to the host system, then record the operating data as-is. Copy the operating data to the driver when using multiple units, and read out the data on the driver side. This contributes to reduced system startup time. Predictive Maintenance with Visualization What is predictive maintenance? By...

Open the catalog to page 5

Operating Data Setting When using the digital setting type, operating data for up to 8 points can be set. ❖ For © to ©, when using the MEXE02 support software and digital setting type driver. Motor, driver, connection cables (flexible connection cables), and cable sets (power supply cable, I/O signals cable) sold separately. ■ Driver ■ Connection Cables / ■ Cable SetsFlexible Connection Cables Type Voltage/ Output Power Supply Cable Cable for I/O Signals Analog setting type Digital setting type Flexible Connection Cable 1.5 m (4.9 ft.) 1 The 15 W geared motor has an integrated motor and...

Open the catalog to page 6

Features of Brushless Motors Brushless motors have slim bodies and provide high output and high efficiency due to the built-in permanent magnets. The built-in sensor (hall IC) constantly monitors the motor's speed. No matter the load conditions, feedback control is carried out at all times so that the command speed and actual speed remain consistent. Speed Stability with Feedback Control Brushless motors compare the setting speed with the speed feedback signals from the motor at all times and adjust the motor's applied voltage. Speed is kept stable over the entire speed range from low to...

Open the catalog to page 7

® Please be sure to purchase O Please purchase as necessary ® Cable Set (Power Supply Cable, I/O Signal Cable) 24 VDC Power Supply (Main Power Supply) O Motor Accessories a Motor / Gearhead Mounting Brackets ^ Page 35 • The support software MEXE02 can be downloaded from Oriental Motor Website Download Page. ❖ A power supply cable and an I/O signal cable are included with the 100 W (1/8 HP) driver. •Example of System Configuration Pricing • The system configuration shown above is an example. Other combinations are also available.

Open the catalog to page 8

• Power Supply Cable and I/O Signal Cable Set LH S 003 C D © © ® © ©

Open the catalog to page 9

Motors, drivers, and connection cables are sold separately. • Driver O Analog Setting Type • Motor O Parallel Shaft Gearhead GFS Gear The motor assembly position can be changed in 90" increments. •Parallel Shaft Gearhead GFS Gear •Hollow Shaft Flat Gearhead FR Gear Motor and gearhead are delivered pre-assembled. The combination of motors and gearheads can be changed. •Geared Motor The geared motor has an integrated motor and gearhead. Motor and gearhead combinations cannot be changed.

Open the catalog to page 10

Connection Cable Flexible Connection Cable Length: 1.5 m (4.9 ft.) Power Supply Cable and I/O Signal Cable Set ® ® Power Supply Cable I/O Signal Cable •The motor cable can also be connected directly to the driver without using a connection cable (or a flexible connection cable). •The maximum extension length between the motor and driver is 2 m (6.6 ft.) [including 0.5 m (1.6 ft.) motor cable]. ❖ The geared type has an integrated motor and gearhead. The combination of motor and gearhead cannot be changed. •A number indicating the gear ratio is specified where the box □ is located within the...

Open the catalog to page 11

Connection Cable Flexible Connection Cable Length: 1.5 m (4.9 ft.) © Power Supply Cable •The motor cable can also be connected directly to the driver without using a connection cable (or a flexible connection cable). •The maximum extension length between the motor and driver is 2 m (6.6 ft.) [including 0.5 m (1.6 ft.) motor cable]. A number indicating the gear ratio is specified where the box □ is located within the product name.

Open the catalog to page 12

Parallel Shaft Gearhead GFS Gear 15 W(1/50 HP), 30 W (1/25 HP), 50 W (1/15 HP), 100 W (1/8 HP)■Specifications c^ius C€ Product Name ❖ Digital setting (when MEXE02 is used). •The values correspond to each specification and characteristics of a stand-alone motor. ❖ The output shaft speed is calculated by dividing the speed by the gear ratio. ,| ,10 mm (0.39 in.) 20 mm (0.79 in.) Distance from Output Shaft End A number indicating the gear ratio is specified where the box □ is located within the product name.

Open the catalog to page 13