AZ Series Right-Angle FC Geared Type Frame Size 35 mm NEW AZ Series Right-Angle FC Geared Type now includes a 35 mm Frame Size. This contributes to space saving of the equipment. Compact & Space Saving The right-angle FC geared type can reduce motor overhang. Example Belt Conveyor Right-Angle Shaft FC Geared Type Standard Type Reduces Overhang Comparison by Product 41 mm NEW Right-Angle Shaft FC Geared Type Installation Size 35 mm 70 mm Right-Angle Shaft FC Geared Type Installation Size 42 mm PS Geared Type Installation Size 28 mm Standard Type Installation Size 42 mm Supports a Wide Range of Torque Bands Three types of gear ratios are available. Select based on the application needs/ requirements. 1.4 Seeking to Improve Productivity by Transporting More Components at Once Emphasizing the Torque/Speed Balance Gear Ratio 7.2 Gear Ratio 15 Gear Ratio 25 High Torque Seeking to Improve Productivity by Transporting Components at High Speed High Speed 400 500 Speed (Gear Shaft) [r/min]

By utilizing the characteristics of the geared type, high strength and an increased permissible radial load can be achieved. The belt and pulley mechanism allows for a high safety factor relative to the belt tension, which makes tension adjustments easier. ❖1 The cable direction is as viewed from the gearhead with the output shaft facing left.

# The product names are listed such that the product names are distinguishable.

Product Name #A number indicating the gear ratio is specified where the box □ is located in the product name. #A number indicating the gear ratio is specified where the box □ is located in the product name. 112 20 5±1 29 Specif cations are subject to change without notice. This catalogue was published in March 2024. Customer Service Center (German & English) Free Hotline 00800-22 55 66 22 - [email protected] These products are manufactured at plants certified with the international standards ISO 9001 (for quality assurance) and ISO 14001 (for systems of environmental management). © Copyright...