3-phase Asynchronous Motors KIIS Series
12Pages

Induction Motors K S Series 200 W Frame Size 110 mmSpecifications - Continuous Rating Product Name *7IK200VAS-ES3T2 conforms to the Electrical Appliance and Material Safety Law. •The values in the tabes are characteristics for motor only. •No built-in overheat protection device (thermal protector) When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. •Use an inverter setting frequency of 120 Hz or less when driving in combination with inverter. ■Product Line •Parallel Shaft Gearhead GV Gear Price includes motor and gearhead. Product Name •The following items are included with each product. Motor, Gearhead, Installation Screws, Parallel Key, Operating Manual •Round Shaft Type O Terminal Box Type Product Name 7IK200VAS-ES3T2 7IK200VAS-EU3T2 •The following items are included with each product. Motor, Operating Manual

"Permissible Torque ●The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is a maximum of 10% less, depending on the load. 50 Hz Unit: Nm Speed [r/min] Product Name Gear Ratio Unit: Nm Speed [r/min] Product Name Gear Ratio $A number indicating the gear ratio is entered where the box ■ is located within the product name. $Either ES, or EU indicating the power supply voltage is entered where the box ■ is located within the product name. "Dimensions (Unit = mm) Installation screws are included. Dimensions...

•A number indicating the gear ratio is entered where the box □ is located within the product name.

"Dimensions (Unit = mm) The cable outlet of the terminal box can be changed and fixed in four different directions. A number indicating the gear ratio is entered where the box ■ is located within the product name. ● Terminal Box Type Gearhead Product Name Motor Product Name Applicable Cable Size Outer Diameter: ϕ7 to ϕ13

This is an aluminum die cast mounting bracket for gearheads and geared motors. There are also high-strength models available for high-power motors and gearheads. Long, horizontal holes make it easy to make fine adjustments during installation. Material: Aluminum alloy Surface treatment: paint • Standard AC Motors, Speed Control Motors •Select the pinion shaft type based on the gearhead to be attached. • Letters are provided in the applicable products table for identifying the series. | Note • Not available for the following products. KIIS Series Right-Angle Geared Motor Hollow Shaft Flat...

These are clamp type couplings for connecting the motor/gearhead shaft with the driven shaft. Once the motor or gearhead is determined, the coupling can be selected. • Applicable products ^ Page C-246 ■Features • Can be used with high torque • Excellent for preventing eccentricity • The structure features a separated hub and sleeve, so workability during installation is improved. ■Selecting a Flexible Coupling Once you have decided on a motor and gearhead as well as the driven shaft diameter, this determines the necessary coupling to use. The coupling selection process is explained using...

■ Applicable Products • Standard AC Motors, Speed Control Motors •Couplings can also be used with round shaft types. Select a coupling with the same inner diameter size as the motor shaft diameter. • For the BXII Series round shaft type, refer to the MCS coupling. O: Uniform load •: Compatible with uniform and shock load •The load in this table are of common use. Check the specifications values of each coupling for details. • Letters are provided in the applicable products table for identifying the series.

Coupling Type Product Name Shaft Hole Diameter d2 • The specifications above are the values when combined with Oriental Motor's motor and gearhead. Normal Torque Permissible Permissible Eccentricity Declination

These cables are used with watertight power relay boxes. Extensions of 5 m and 10 m are available. ■Specifications ■Dimensions (Unit mm) Cable Cores Construction: Refer to the dimension on the right Finished Outer Diameter: ^7.8 Outer Sheath: Heat-resistant vinyl chloride CR Circuit for Surge Suppression This is used to protect the contacts of the relay or switch used in the bi-directional circuit or the instantaneous stop circuit of a motor. ■Product Line 250 VAC (120 a, 0.1 |xF) Product Name EPCR1201-2 ■Dimensions (Unit mm) Mass: 5 g

These products are manufactured at plants certified with the international standards ISO 9001 (for quality assurance) and ISO 14001 for systems of environmental management). Specifications are subject to change without notice. This catalogue was published in January 2024. ORIENTAL MOTOR (EUROPA) GmbH ORIENTAL MOTOR ITALIA s.r.l. European Headquarters Schiessstraße 44 40549 Düsseldorf, Germany Tel: 0211 5206700 Fax: 0211 52067099 UK Headquarters Unit 5, Faraday Office Park, Rankine Road, Basingstoke, Hampshire RG24 8AH, U.K. Tel: +44 1256 347090 Fax: +44 1256 347099 Italy Headquarters Via...