cad

1.8°, 0.72° / 0.36° Stepper Motor and Driver CVK Series*
24Pages

{{requestButtons}}

Catalog excerpts

1.8°, 0.72° / 0.36° Stepper Motor and Driver CVK Series* - 1

1.8°, 0.72° and 0.36° Stepper Motor and Driver Package Compact, standardized drivers, combined with performance driven high torque stepper motors, for the optimum results. 20 mm, 28 mm, 35 mm, 42 mm, 56.4 mm or 60 mm (0.79 in.) (1.10 in.) (1.38 in.) (1.65 in.) (2.22 in.) (2.36 in.)

Open the catalog to page 1
1.8°, 0.72° / 0.36° Stepper Motor and Driver CVK Series* - 2

1.8° Stepper Motor 1.8° motor and driver packages now have the highest torque in the low-speed range. With Oriental Motor’s higher current stepper motors and superior microstepping performance, low vibration is achieved throughout the speed range. Revisions to the motor winding design and a high-efficiency driver circuit design allow for significant torque increases in the low-speed range. In particular, torque in the 250 r/min range has been increased by 50% compared to conventional products allowing for quicker moves. Vibration and noise have been greatly reduced compared to conventional...

Open the catalog to page 2
1.8°, 0.72° / 0.36° Stepper Motor and Driver CVK Series* - 3

0.72° and 0.36° Stepper Motor 0.72° and 0.36° motor and driver packages have higher torque in the upper speed ranges. With Oriental Motor’s motor technology and microstepping performance, even greater positional accuracy, lower vibration and noise are achieved. Through revisions to the motor winding design and a high-efficiency driver circuit design, the performance of 0.72°/0.36° stepper motors has been brought to their full potential, resulting in significant increases in torque in all speed ranges. Torque in the 500 r/min range has increased by 85% compared to conventional products. In...

Open the catalog to page 3
1.8°, 0.72° / 0.36° Stepper Motor and Driver CVK Series* - 4

Superior Performance with 1.8° or 0.72°/0.36° Stepper Motor and Driver Packages A Significant Torque Increase Allows for More Applications 1.8° Emphasize maximum holding torque & the highest torque in the low speed range. Torque [oz-in] The maximum holding torque in the low-speed range is achieved with the 1.8° motor and driver packages through the use of a high motor current design and specification. The speed range has increased considerably with the 0.72°/0.36° packages. Provides the highest torque in the high speed range. Low Vibration with Full-Time Microstepping 1.0 Vibration...

Open the catalog to page 4
1.8°, 0.72° / 0.36° Stepper Motor and Driver CVK Series* - 5

Common Driver Installation and Wiring Allow for the Desired Performance. There's a Wide Choice with 1.8° and 0.72°/0.36° Stepper Motors The size, installation and I/O connectors for the CVK Series 1.8° and 0.72°/0.36° motor and driver packages are the same. Because of this, it is easy to evaluate and select the proper package for the requirement. ✽ The driver for a 1.8° stepper motor and the driver for a 0.72°/0.36° stepper motor are not interchangeable. Each motor type has a dedicated driver. Use the Step Angle Setting Switch (page 20) to set the proper resolution without changing your...

Open the catalog to page 5
1.8°, 0.72° / 0.36° Stepper Motor and Driver CVK Series* - 6

The CVK Series is a stepper motor and driver package designed for guaranteed performance. The motor product line-up includes a 1.8°, 0.72° or 0.36° stepper motor and driver with virtually identical frame sizes. The drivers are compatible in terms of functionality, operation method and installation. Furthermore, the prices of the 1.8° and 0.72°/0.36° stepper motor and driver packages are similar, making them both affordable and attractive. ● Select the optimal performance package to suit the desired specification. ■Product Number ① Series Name CVK: CVK Series 2: 1.8° Stepper Motor 5:...

Open the catalog to page 6
1.8°, 0.72° / 0.36° Stepper Motor and Driver CVK Series* - 7

■System Configuration An example of a system configuration with the SCX11 controller shown below. ✽Not supplied Controller (Sold separately) Accessories (Sold separately) Programmable Controller✽ Connection Cable ➜ Page 23 Driver (Must be connected by the customer.) A 0.6 m (2 ft.) connection cable is included with a connector-coupled motor. Accessories (Sold separately) Motor Mounting Bracket ➜ Page 23 ●System Configuration Price Example Sold Separately CVK Series Motor Mounting Bracket Flexible Coupling ● The system configuration shown above is an example. Other combinations are also...

Open the catalog to page 7
1.8°, 0.72° / 0.36° Stepper Motor and Driver CVK Series* - 8

1.8° Stepper Motor and Driver Package Frame Sizes: 20 mm (0.79 in.), 28 mm (1.10 in.) Standard Type ■Specifications Max. Holding Torque Holding Torque at Motor Standstill Rotor Inertia Rated Current Basic Step Angle Power-Supply Voltage Excitation Mode Single Shaft Double Shaft N·m (oz-in) N·m (oz-in) J: kg·m2 (oz-in2) A/Phase Product Name ✽ A 0.6 m (2 ft.) connection cable is included with a connector-coupled motor. ■Speed - Torque Characteristics CVK213AK/CVK213BK Driver Input Current 0.005 Driver Input Current Pullout Torque Torque [oz-in] Pullout Torque Torque [oz-in] Pullout Torque...

Open the catalog to page 8
1.8°, 0.72° / 0.36° Stepper Motor and Driver CVK Series* - 9

0.72°/0.36° Stepper Motor and Driver Package Frame Size: 28 mm (1.10 in.) Standard Type ■Specifications Single Shaft Double Shaft N·m (oz-in) N·m (oz-in) J: kg·m2 (oz-in2) A/Phase Product Name Max. Holding Torque Holding Torque at Motor Standstill Rotor Inertia Rated Current Basic Step Angle Power-Supply Voltage Excitation Mode ● A 0.6 m (2 ft.) connection cable is included. ■Speed - Torque Characteristics CVK523AK/CVK523BK Driver Input Current Pullout Torque Pullout Torque Torque [oz-in] Torque [oz-in] ● The pulse input circuit responds up to 1 MHz with a pulse duty of 50%. Note ●...

Open the catalog to page 9
1.8°, 0.72° / 0.36° Stepper Motor and Driver CVK Series* - 10

1.8° Stepper Motor and Driver Package Frame Size: 35 mm (1.38 in.), 42 mm (1.65 in.) Standard Type ■Specifications Single Shaft Double Shaft N·m (oz-in) N·m (oz-in) J: kg·m2 (oz-in2) A/Phase Product Name Max. Holding Torque Holding Torque at Motor Standstill Rotor Inertia Rated Current Basic Step Angle Power-Supply Voltage Excitation Mode ● A 0.6 m (2 ft.) connection cable is included. ■Speed - Torque Characteristics CVK233AK/CVK233BK Driver Input Current Pullout Torque 0.3 Driver Input Current 0.1 500 0.8 Pullout Torque 0.6 0.4 Driver Input Current ● The pulse input circuit responds up to...

Open the catalog to page 10
1.8°, 0.72° / 0.36° Stepper Motor and Driver CVK Series* - 11

● A 0.6 m (2 ft.) motor connection cable is included with each package : LC2B06B ● Motor Applicable Connector Connector Housing: 51103-0600 (Molex) Contact: 50351-8100 (Molex) Crimp Tool: 63811-8100 (Molex) ✽ The length of machining on the double shaft product is 15±0.25 (0.591±0.010). ● These dimensions are for double shaft products. For single shaft products, ignore the ● A 0.6 m (2 ft.) motor connection cable is included with each package : LC2B06B ● Applicable Connector Connector Housing: 51065-0600 (Molex) Contact: 50212-8100 (Molex) Crimp Tool: 63819-0500 (Molex) Motor Product Name...

Open the catalog to page 11

All ORIENTAL MOTOR catalogs and technical brochures

  1. Product Guide

    36 Pages

  2. Product Guide

    36 Pages

  3. DRS series

    2 Pages

  4. DGII

    2 Pages

  5. EH series

    12 Pages

  6. Servo Motors

    7 Pages

  7. DSC Series

    76 Pages

  8. BLH Series

    36 Pages

  9. DSC Series

    11 Pages

  10. BXII Series

    31 Pages

  11. RKII Series

    51 Pages

  12. AZ Series

    10 Pages

  13. CVK Series

    24 Pages

  14. Stepper Motors

    33 Pages

  15. Servo motors

    9 Pages

  16. KII Series

    16 Pages

  17. RK Series

    4 Pages

  18. AS Series

    4 Pages

  19. AR Series

    4 Pages