For details on this product please refer to our website, contact technical support or your nearest Oriental Motor sales office. www.orientalmotor.com All-in-One Closed Loop Stepping Motor ASX Series The ASX Series is an all-in-one closed loop motor. The controller and drive have been combined with the motor and feedback device, creating this all-in-one solution. technology prevents the motor from losing synchronism even when subjected to abrupt load fluctuation or acceleration. ● For detailed product safety standard information including standards, file number and certification body, please visit www.orientalmotor.com. ■ Features ● Incorporating Our Unique Closed Loop Control ● Selectable from Three Control Methods For details, refer to "AR Series, Features" on page A-24. ◇ Pulse Input Mode ● Driver and Controller Integrated with Motor Operated with an external pulse signal like the conventional stepping motor system. The driver and controller are compactly built into the motor, effectively saving space in the equipment due to little installation and wiring space required. No cables are required to connect the motor, driver and controller. Problems caused by electrical noise can also be expected to decrease. Pulse Generator or Encoder ● Use of One-Touch Lock Connectors One-touch lock connectors are used to connect the motor cables, making wiring easy even in tight spaces. ◇ RS-232C Communication Control Mode The simplest configuration, operating based on direct commands sent from the computer. One-Touch Lock Connector RS-232C Computer or Programmable Controller ◇ I/O Control Mode (Sequence Operation Mode) The internally recorded program is operated through I/O control. One-Touch Lock Connector Home Sensor Limit Sensor Other Device ORIENTAL MOTOR GENERAL CATALOG 2012/2013

Stepping Motors ● Automatic Current Control (Low Heat Generation) ● Jerk Limiting Control (Low Vibration) 2000 3000 Speed [r/min] The acceleration/deceleration pattern using a jerk limiting control function allows you to reduce vibration. Speed [r/min] Normally Operating Torque Optimum Operating Torque Torque Characteristics AC Input Motor & Driver 0.36° 0.72° /Geared /Geared ● Load information, such as inertia and friction, is required for automatic generation of optimal operating patterns. If the load is unknown, it can be estimated using the load estimation function. The current at constant...

0.36° All-in-One Closed Loop Stepping Motor ASX Series ■ System Configuration An example operated by an I/O control mode or RS-232C communication control mode. Accessories (Sold separately) ●Example of System Configuration ASX Series Sold Separately Motor Flexible Mounting Bracket Coupling PAL2P-5A MCS300808 ●The system configuration shown above is an example. Other combinations are available ✽1 For accessory details on these products please either refer to our website, contact technical support or your nearest Oriental Motor sales office. www.orientalmotor.com ✽2 Not supplied ORIENTAL MOTOR...

Stepping Motors ● Basic Package ■ Product Line ● Developer's Package The following items are included in each product. Motor, Power Connector, Wire Insert Tool, Communication Connector Motor, Power Connector, Wire Insert Tool, Communication Connector, AS Communication Cable, I/O Cable Immediate Motion Creator (Setting Software), Manual Communication Connector Wire Insert Tool Communication Cable Immediate Motion Creator (Setting Software) For details (specifications, characteristics, dimensions and others) on these products please refer either to our website, contact technical support or your...