1. Catalogs
  2. ORCA PENNEL & FLIPO
  3. PROOFED FABRICS FOR INFLATABLE CRAFTS
video corpo

PROOFED FABRICS FOR INFLATABLE CRAFTS

PROOFED FABRICS FOR INFLATABLE CRAFTS

PROOFED FABRICS FOR INFLATABLE CRAFTS

Product catalog summary
Product Description: ORCA 215 is a coated fabric designed for inflatable boat hulls. It features a high tenacity polyester base fabric with specific coatings for durability.
Specifications: The fabric is made from polyester with a high tenacity of 1110 dtex and 990 deniers. The exterior is coated with Chlorosulfonated Polyethylene (CSM) and Polychloroprene (CR), while the interior is coated with Polychloroprene (CR).
Compliance and Standards: The product complies with International Standard ISO 6185-3:2024. It is approved by Bureau Veritas Marine & Offshore, with the certificate valid until 14 Aug 2029.
Test Reports: The product has undergone various tests, including type testing, low temperature resistance, ozone resistance, tear strength, and cold resistance, with reports dating back to 2004 and as recent as 2019.
Application and Limitations: The fabric is intended for inflatable tubes with a diameter not exceeding 400 mm and boats between 3 to 8 meters in length. It is not suitable for boats with a single inflatable chamber or buoyancy less than 1800N, nor for inflatable liferafts.
Production and Marking: The fabric is produced by PENNEL & FLIPO in Belgium. It must be marked with the trade name, batch number, date of manufacture, and BV Type Approval Certificate number for traceability.
Responsibilities: PENNEL & FLIPO must inform shipbuilders or subcontractors about the proper fitting, use, and maintenance of the fabric.
Additional Information: This certificate renews a previous one and is valid without a signature. It is subject to compliance with specified conditions and standards.
See more

Catalog excerpts

PROOFED FABRICS FOR INFLATABLE CRAFTS-1

Page 1 / 2 Certificate number: 13910/E0 BV File number: FAB 2017/10 Product code: 9065H This certificate is not valid when presented without the full attached schedule composed of 7 sections TYPE APPROVAL CERTIFICATE This certificate is issued to PENNEL & FLIPO MOUSCRON - BELGIUM for the type of product PROOFED FABRICS FOR INFLATABLE CRAFTS ORCA 215 - Polyester High Tenacity 1100 dtex 990 deniers Requirements: This certificate is issued to attest that Bureau Veritas Marine & Offshore did undertake the relevant approval procedures for the product identified above which was found to comply with the relevant requirements mentioned above. This certificate is a renewal of certificate N° 13910/D0 BV expiring on 14/08/2024 This certificate will expire on: 14 Aug 2029 For Bureau Veritas Marine & Offshore, At BV ANTWERP, on 15 Jul 2024, Nele Appels This certificate was created electronically and is valid without signature This certificate remains valid until the date stated above, unless cancelled or revoked, provided the conditions indicated in the subsequent page(s) are complied with and the product remains satisfactory in service. This certificate will not be valid if the applicant makes any changes or modifications to the approved product, which have not been notified to, and agreed in writing with Bureau Veritas Marine & Offshore. Should the specified regulations or standards be amended during the validity of this certificate, the product(s) is/are to be re-approved prior to it/they being placed on board vessels to which the amended regulations or standards apply. This certificate is issued within the scope of the General Conditions of Bureau Veritas Marine & Offshore available on the internet site www.veristar.com. Any Person not a party to the contract pursuant to which this document is delivered may not assert a claim against Bureau Veritas Marine & Offshore for any liability arising out of errors or omissions which may be contained in said document, or for errors of judgement, fault or negligence committed by personnel of the Society or of its Agents in establishment or issuance of this document, and in connection with any activities for which it may provide. The electronic version is available at: http://www.veristarpm.com/veristarnb/jsp/viewPublicPdfTypec.jsp?id=vqr5qalr9b BV Mod. Ad.E 530 June 2017 This certificate consists of 2 page(s)

 Open the catalog to page 1
PROOFED FABRICS FOR INFLATABLE CRAFTS-2

ORCA 215 is a coated fabric intended to be used for inflatable/inflated hull of boats. • As per requirements of regulations stated on front page of this certificate. • Intended to be used for inflatable/inflated tube not more than 400 mm of diameter of boats. • According to the Manufacturer recommendation, the length of the boat should be not more than 3 m and not more than 8 meter according to the ISO standard 6185-3. • Not intended to be used for boats with one inflatable chamber, and for boats with buoyancy less than 1800N. • Not intended to be used for inflatable liferaft. 5.1 - The coated...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.