*mydirectindustry

SSG10

1 / 1 PageView full catalog

SSG10

Product catalog summary

General Specifications:

Housing Material: Metal
Geartrain Material: Steel
Max Input Speed: 10,000 rpm
Operating Temperature Range: -10 to +60 °C
Backlash at No-Load per Stage: 7 hd
Bearings on Output Shaft: Sintered sleeve bearings
Max Shaft Radial Load: 3 N (7mm from flange)
Max Shaft Axial Load: 1 N
Max Shaft Press Fit Force: 20 N
Shaft Radial Play: 0.03 mm
Shaft Axial Play: 0.02 mm
Max Allowable Torque (Continuous): 12 mNm
Max Allowable Torque (Intermittent): 30 mNm

Gear Ratio Specifications:

Reduction Ratios: 15.40:1, 29.25:1, 48.75:1, 72.29:1, 93.43:1, 261.60:1
Number of Stages: 3 to 6 depending on the ratio
Efficiency: Ranges from 53% to 73% depending on the ratio
Gearhead Length: 14 mm to 20 mm
Weight: 5.4 g to 7.9 g

Motor and Gearhead Combination:

Coreless Motor CMS10-13..S: Total length ranges from 26.9 mm to 32.9 mm
Coreless Motor CMS10-18..S: Total length ranges from 32.4 mm to 38.4 mm
Brushless Motor BMS10-10..S: Total length ranges from 24.0 mm to 30.0 mm
Brushless Motor BMS10-18..S: Total length ranges from 32.0 mm to 38.0 mm

Additional Information:

For non-standard gear ratios, refer to the table on page 100.
Specifications are subject to change without notice.

Contact Information:

Company: Orbray Co., Ltd.
Address: 3-8-22 Shinden, Adachi-ku, Tokyo 123-8511, Japan
Phone: +81-3-5390-7620
Website: https://orbray.com/en/
Email: [email protected]

Catalog excerpts

NOLINGOUIN! SSHNNIH PRECISION GEARHEAD SERIES Spur gearhead Note) Dimension marked ※ is measured with shaft pushed against gearhead. (7mm from flange) Max shaft axial load Max shaft press fit force Shaft radial play Shaft axial play Max allowable torque (Continuous) Max allowable torque (Intermittent) Metal (金属 ) Steel (スチール) 10000 -10.…+60 ミ 7 Sintered sleeve bearings (###82U—7) 7 Max shaft radial load YOON SSTIKSIMASHE Housing material Geartrain material Recommended max input speed Operation temperature range Backlash at no-load per stage Bearings on output shaft 15 Direction of rotation 16 Gearhead length: Li 17 Weight Combination with motor Type (HERI) Reduction ratio( Motor+gearhead 12 Reduction ratiorabsolute value) 13 Number of stage total length) Coreless Motor ‘MOLOW ONGAIE SLONGOYd WEHdS Spec based on stages (ギヤ別仕様 ) r ratio not listed above, please refer to the table on P.100. Orbray Co., Ltd. 3-8-22 Shinden, Adachi-ku, Tokyo 123-8511 Japan

Open the catalog to page 1

SSG10

SSG10

Catalog excerpts

All Orbray Co., Ltd catalogs and technical brochures