NOLINGOUIN! SSHNNIH PRECISION GEARHEAD SERIES Note) Dimension marked ※ is measured with shaft pushed against gearhead. Housing material Geartrain material Recommended max. input speed Operation temperature range 5 Backlash at no-load per stage 6 Bearings on output shaft 7 Max. shaft radial load (7mm from flanae) 8 Max. shaft axial load S1 Sintered sleeve bearings Max. shaft press fit force Shaft radial play Shaft axial play Max allowable torque (Continuous) 13 Number of stage 14 Efficiency Reduction ratio( Motor+gearhead total length) 減速 此 ( モ ー タ ー 十 ギヤ 全長 ) Brushless Motor 16 Gearhead length: L1 17 Weight Combination with motor ( 各 モ ー タ ー と の 組み 合わ せ ) 13 Max allowable torque (Intermittent) 長大 トル ク ( 断 続 ) Spec based on stages For non-standard gear ratio not listed above, please refer to the table on P.105.