*mydirectindustry

ETD12-2C/D/E

Product catalog summary

Overview: The document provides technical specifications for the Orbray ETD12-2C/D/E, a 2-channel optical incremental encoder designed for use with the CMS12 series motors. It outlines the encoder's specifications, output signals, and electrical connections.

Specifications:

Encoder Type: Optical Incremental
Output Signal: CMOS/TTL compatible
Number of Channels: 2
Resolution: 128, 256, 512 pulses per revolution
Max Frequency Response: 55, 110, 220 kHz
Supply Voltage: 4.5 to 5.5 V
Supply Current: 20 mA
Output Voltage 'H': 2.4 V (Max. Vcc)
Output Voltage 'L': 0.4 V
Output Current per Channel: 1.5 mA
Rise and Fall Time: 100 ns
Operating Temperature: -20 to +85°C
Storage Temperature: -20 to +85°C

Output Signal Information:

Cycle: 360°
Pulse Width: 180°
Phase Shift: 90° to 245°
Logic State Width: 90° to 145°

Electrical Connections:

#1: MOTOR+
#2: Vcc (DC 4.5 to 5.5V)
#3: Channel A (CMOS/TTL compatible)
#4: Channel B (CMOS/TTL compatible)
#5: NC (optional Channel Z for 3-channel)
#6: GND
#7: MOTOR-

Additional Information: Specifications are subject to change without notice. For further details, contact Orbray Co., Ltd. at their Tokyo office or visit their website.

Catalog excerpts

NOLINGOUIN! SSHNNIH FEEDBACK DEVICES When combined with CMS12 series 2 Channels optical incremental encoder Output Signal Number of Channels Supply Current, typical CMOS/TTL compatible channel pulse/rev 11 Output current per channel Optical Incremental Encoder Type YOON SSTIKSIMASHE Applicable motor (適用モータ ) : CMS 12 series, (BMS12 under development , BMS12 への接続は要追加工 ) Output signal (at motor shaft clockwise rotation) Logic state width,S Electrical connections CMOS/TTL CMOS/TTL Orbray Co., Ltd. 3-8-22 Shinden, Adachi-ku, Tokyo 123-8511 Japan E-mail: [email protected]

Open the catalog to page 1

ETD12-2C/D/E

ETD12-2C/D/E

Catalog excerpts

All Orbray Co., Ltd catalogs and technical brochures